Shite Ron Posted August 4, 2020 Share Posted August 4, 2020 This is a great looking car and not one I recall seeing before. Very well bought, I am looking forward to seeing updates on this and also very impressed that the Princess is now your modern car. Congratulations on a great buy, you must be very excited waiting for it to arrive. vulgalour 1 Link to comment Share on other sites More sharing options...
wuvvum Posted August 4, 2020 Share Posted August 4, 2020 That bootlid looks a lot like the one on the Daimler. I wonder if it only opens up about 15 degrees like the Daimler's did? Link to comment Share on other sites More sharing options...
wuvvum Posted August 4, 2020 Share Posted August 4, 2020 1 hour ago, somewhatfoolish said: Are these not a centrifugal clutch rather than fluid flywheel? There's little enough power on tap without wasting it. Defo fluid flywheel on these. They weren't built for performance... Link to comment Share on other sites More sharing options...
Angrydicky Posted August 4, 2020 Share Posted August 4, 2020 What a beautiful old crock, I absolutely adore it and am insanely jealous! I'll have to come and visit it/you (in the Somerset, naturally) when this is all over! I'm firmly in the 'do not paint' camp and those front seats don't look bad at all for 70 odd years old. Loads of leather cream to soften them up and some sympathetic repairs are all that are required. Nice Coventry numberplate too and original plates as well. Another big bonus in my eyes as so many of these have had their plates nicked. Jeremy Clarkson once described his co-presenter's Lanchester as "like driving around in a radiogram". I think he was right! vulgalour, 500tops, puddlethumper and 5 others 8 Link to comment Share on other sites More sharing options...
PhilA Posted August 4, 2020 Share Posted August 4, 2020 1 minute ago, wuvvum said: Defo fluid flywheel on these. What kind of diameter? Mine is about 16" across and is locked almost solid by about 800rpm- would have thought similar characteristics on this would be desired. Link to comment Share on other sites More sharing options...
HMC Posted August 4, 2020 Share Posted August 4, 2020 Great buy! Love the originality, especially its original reg. So nice to see. IIRC Michael Sedgwick in My falling to bits classic cars 1945-1970 refered to them as “retired colonel type transport” Hence I do hope you grow an impressive moustache for deployment after recommissioning. egg, vulgalour, Christine and 1 other 3 1 Link to comment Share on other sites More sharing options...
barrett Posted August 4, 2020 Share Posted August 4, 2020 30 minutes ago, vulgalour said: We haven't decided if we're getting the seats reupholstered with new, or are going to just attempt to repair the damage and retain the aged look. Under no circumstances can you replace the leather. That is literally 100 per cent of the appeal of an old car - new upholstery is always (with about 1 in 100,000,000 exceptions) horrible, and it will never age the same way as old upholstery. I cannot stress this enough - if you put new leather in, the car will be ruined forever. It is, of course, possible to make a good fist of new upholstery, but conservatively it's going to cost £10k to do it anywhere near as well as original. 99 per cent of new old car leather is pre-coloured hides, which always look wrong, for example. Ditto the stuffing, stitching, anything else - only a tiny handful of people actually have the skills, or the attention to detail, to do a proper job. Again, just in case you didn't hear me: DO NOT RETRIM Christine, Vantman, Amishtat and 22 others 21 4 Link to comment Share on other sites More sharing options...
PhilA Posted August 4, 2020 Share Posted August 4, 2020 6 minutes ago, HMC said: IIRC Michael Sedgwick in My falling to bits classic cars 1945-1970 refered to them as “retired colonel type transport” Hercules Grytpype-Thinne? Asimo, rml2345 and CreepingJesus 3 Link to comment Share on other sites More sharing options...
Christine Posted August 4, 2020 Share Posted August 4, 2020 If you need horse hair.....see me! puddlethumper and stonedagain 2 Link to comment Share on other sites More sharing options...
Angrydicky Posted August 4, 2020 Share Posted August 4, 2020 3 minutes ago, barrett said: Under no circumstances can you replace the leather. That is literally 100 per cent of the appeal of an old car - new upholstery is always (with about 1 in 100,000,000 exceptions) horrible, and it will never age the same way as old upholstery. I cannot stress this enough - if you put new leather in, the car will be ruined forever. It is, of course, possible to make a good fist of new upholstery, but conservatively it's going to cost £10k to do it anywhere near as well as original. 99 per cent of new old car leather is pre-coloured hides, which always look wrong, for example. Ditto the stuffing, stitching, anything else - only a tiny handful of people actually have the skills, or the attention to detail, to do a proper job. Again, just in case you didn't hear me: DO NOT RETRIM Well said. I wish the Standard had its original interior, but it had already been retrimmed (badly) when we got it and ideally needs doing again. Ditto the original paint etc. Amishtat 1 Link to comment Share on other sites More sharing options...
vulgalour Posted August 4, 2020 Author Share Posted August 4, 2020 @barrett one of the big turn offs to a retrim is precisely what you say, those predyed leathers just look too uniform and artificial, sometimes even looking like it's been redone in vinyl The texture is usually wrong too. The leather in the car is actually still quite supple, I was expecting it to be dry and cardboardy, but it's still quite springy. The damage on the passenger seat looks like a cat has used it as a scratching post, and if I remember there's a tear across the back seat. Hopefully we can just bridge it from the back, or insert a piece of old leather from another seat or something like that. The door cards hopefully just need a bit of a reglue and some care to get their shape back, at worst new backing boards. eddyramrod, Cavcraft, Shite Ron and 2 others 5 Link to comment Share on other sites More sharing options...
egg Posted August 4, 2020 Share Posted August 4, 2020 Any idea why the DVLA says this is a 1957 registered and 57 built car? Link to comment Share on other sites More sharing options...
DSdriver Posted August 4, 2020 Share Posted August 4, 2020 I look forward to being stuck in a queue behind you Christine and vulgalour 1 1 Link to comment Share on other sites More sharing options...
Tadhg Tiogar Posted August 4, 2020 Share Posted August 4, 2020 24 minutes ago, Christine said: If you need horse hair.....see me! Or me. 3 minutes ago, DSdriver said: I look forward to being stuck in a queue behind you ...on a steep hill. vulgalour and Christine 1 1 Link to comment Share on other sites More sharing options...
vulgalour Posted August 4, 2020 Author Share Posted August 4, 2020 11 minutes ago, egg said: Any idea why the DVLA says this is a 1957 registered and 57 built car? None, though we do have several theories. Theory 1 is that someone messed up at the DVLA and misread a 1 as a 7. Theory 2 is that it went abroad at some point and was reimported a few years later, so got slapped with a '57 registration date Theory 3 is that it sat around unsold/registered somewhere for the first few years of its life. Perhaps that first owner was MOD or something of that sort. Other than that, no idea. It's got a new-ish V5 and the DVLA know it exists so I'm not going to worry about it. puddlethumper, egg, chaseracer and 2 others 4 1 Link to comment Share on other sites More sharing options...
LightBulbFun Posted August 4, 2020 Share Posted August 4, 2020 16 hours ago, egg said: Any idea why the DVLA says this is a 1957 registered and 57 built car? 16 hours ago, vulgalour said: None, though we do have several theories. Theory 1 is that someone messed up at the DVLA and misread a 1 as a 7. Theory 2 is that it went abroad at some point and was reimported a few years later, so got slapped with a '57 registration date Theory 3 is that it sat around unsold/registered somewhere for the first few years of its life. Perhaps that first owner was MOD or something of that sort. Other than that, no idea. It's got a new-ish V5 and the DVLA know it exists so I'm not going to worry about it. KKVxxx was first issued in May 1951 (nice to see it still retains its original mark ) so I suspect at some point as you say the 1 may have been miss read as a 7 etc (probably when it was transferred from a buff logbook to the DVLC V5 computer system) as a side note currently the DVLA only have it recorded as registered in 1957 right now im pretty sure the year of manufacture is not actually explicitly recorded yet but probably will get updated once the new V5 arrives and or its taxed again etc you cant see it without 3rd party tools now, but the DVLA only started recording the year of manufacture recently (unless declared otherwise) and on old versions of the DVLA checker you could see this in action, old records that had not been updated in many years would not actually have a year of manufacture recorded but once a vehicle gets a new V5 issued and is taxed once more etc a year of mfg would suddenly pop up AFAIK as above the internal system still works like this from what I have seen/can tell, but the newer DVLA checker just get the year of manufacture from the date of first registration, even if its not explicitly recorded yet as a side note if you can do the keeper transfer online, you get to keep the 2008 V5 and id try and do so as it looks like it will have the "1st" keepers details on it (or more specifically Im guessing the V5 probably says "number of former keepers since July 1977" or whenever it was V5'ed as the keeper counts would not always be moved over from the buff logbook so they would put a special note of that in the V5 saying the keeper count only goes back to such and such date) Dick Longbridge, HMC, vulgalour and 1 other 3 1 Link to comment Share on other sites More sharing options...
morrisoxide Posted August 4, 2020 Share Posted August 4, 2020 Brilliant purchase! I bet that interior smells wonderful after a blast on a B road on warm day. The smell of decaying leather, horse hair, wood, petrol and a slight whiff of oil. Needs a crochet rug and a map from 1953 on the back seat stat vulgalour, binhoker668, HMC and 1 other 4 Link to comment Share on other sites More sharing options...
somewhatfoolish Posted August 4, 2020 Share Posted August 4, 2020 1 hour ago, PhilA said: Hercules Grytpype-Thinne? More Major Denis Bloodnok I think. 1 hour ago, vulgalour said: @barrett one of the big turn offs to a retrim is precisely what you say, those predyed leathers just look too uniform and artificial, sometimes even looking like it's been redone in vinyl The texture is usually wrong too. The leather in the car is actually still quite supple, I was expecting it to be dry and cardboardy, but it's still quite springy. The damage on the passenger seat looks like a cat has used it as a scratching post, and if I remember there's a tear across the back seat. Hopefully we can just bridge it from the back, or insert a piece of old leather from another seat or something like that. The door cards hopefully just need a bit of a reglue and some care to get their shape back, at worst new backing boards. What is it about old leather that's different? Is the colour a surface finish in effect(I vaguely recall the bright red in Jag Mk2s was like that)? In which case could undyed hide not be used and then coloured using a kit? PhilA 1 Link to comment Share on other sites More sharing options...
jonny69 Posted August 4, 2020 Share Posted August 4, 2020 I don’t think I appreciated that this was coachbuilt. Amazing! or did I mean fuggin hell, shiters knocking about in old coachbuilt tin, this place ain’t what it used to be etc chaseracer, loserone, egg and 9 others 5 7 Link to comment Share on other sites More sharing options...
Christine Posted August 4, 2020 Share Posted August 4, 2020 I watched the Bentley build program on telly a few weeks ago " We have 500,000 pounds worth of hide at any one tiime... It's all perfect ...We only have leather from bulls .. Cow leather has stretch marks ...We only have the best this We only have the best that....etc. ." The next program was Aston Martin , somewhat similar.....but more performance orientated... The next program was how they build a Morgan in a shed ...? Nothing was said about the source of leather ! Coprolalia, paulplom and beko1987 2 1 Link to comment Share on other sites More sharing options...
vulgalour Posted August 4, 2020 Author Share Posted August 4, 2020 @Christine Yes please on the little motoring book, that's a lovely looking thing just for the cover really. Link to comment Share on other sites More sharing options...
puddlethumper Posted August 4, 2020 Share Posted August 4, 2020 8 hours ago, vulgalour said: glitter paint, murals, buttoned crushed velour interior, sketchy radio install, fibreglass additions, fog light to illuminate the rear axle (chromed, naturally).... And a spanner welded on the diff. chaseracer and vulgalour 1 1 Link to comment Share on other sites More sharing options...
Christine Posted August 4, 2020 Share Posted August 4, 2020 Yeah i thought i had a Lanchester book in the attic , apparently not ...but i found that map booklet , Detling hill was well scary in those days by the look of it .. Now a dual carriageway, in those days a single ..so a good chance of a full speed runaway head on !! Link to comment Share on other sites More sharing options...
lesapandre Posted August 4, 2020 Share Posted August 4, 2020 Ditto for the leather. Repair will retain the character. If necessary get specialist help - will be less than a retrim. Bodies - the all steel Briggs bodies were manufactured in Dagenham and I think shipped up by rail to Coventry. Wikipedia says that this led to supply problems (Briggs having Ford as their main customer) and Ford took them over in 1954. The Barker bodies interestingly were a step back in that they are wood framed I think. Being coach built I wonder if the chassis were sent down to Barker in London for completion? Bit of a convoluted history and all that sending of parts about the country must have eaten into profits. I'm sure the owners club will know more. Link to comment Share on other sites More sharing options...
vulgalour Posted August 4, 2020 Author Share Posted August 4, 2020 Can confirm, the Barker body, which this one is, has a wooden frame with aluminium banged over the top. I'm not sure what exactly is shared between the Briggs and Barker bodies, if anything, though I suspect the front wings are, and the infill panel that goes behind the front bumper. The panels on the side of the bonnet might too. This is one of those cars with a hinged bonnet lid, and then two removable panels, one each side, if you need a bit more room to get in the engine bay. The rear arches on the Briggs body are part of the body, while the Barker ones are separate, so they're not interchangable, but both are steel. Presumably having the wings in steel rather than aluminium was done because they can brush off more substantial bumps. Coprolalia, Dick Longbridge, PhilA and 2 others 5 Link to comment Share on other sites More sharing options...
320touring Posted August 4, 2020 Share Posted August 4, 2020 That is JUST LUSH. lovely biscuits! vulgalour 1 Link to comment Share on other sites More sharing options...
Vantman Posted August 4, 2020 Share Posted August 4, 2020 A bit off topic but if you need parts this is the number you need,at the head of the letter!!! Actually it's the parts needed for a Lanchester Eleven that was in for repair at the garage where i first started work. Angrydicky, vulgalour, Mrs6C and 11 others 13 1 Link to comment Share on other sites More sharing options...
ETCHY Posted August 4, 2020 Share Posted August 4, 2020 Interesting shape. To my eyes the back end looks more modern than the front. It's got real character, bloody superb ! lesapandre and vulgalour 2 Link to comment Share on other sites More sharing options...
motorpunk Posted August 4, 2020 Share Posted August 4, 2020 Vulg’, this is lovely, well done and thanks for sharing. vulgalour 1 Link to comment Share on other sites More sharing options...
somewhatfoolish Posted August 4, 2020 Share Posted August 4, 2020 1 hour ago, Vantman said: A bit off topic but if you need parts this is the number you need,at the head of the letter!!! Actually it's the parts needed for a Lanchester Eleven that was in for repair at the garage where i first worked. Sadly 'Daimler House', 290 Willesden Ln seems to be a block of flats and a Shell garage these days. lesapandre 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now