Pete-M Posted November 25, 2023 Share Posted November 25, 2023 19 hours ago, RoverFolkUs said: Been given an R55 Mini clubman thing to use over the weekend as it needs an extended test drive following a (hopefully fixed) very intermittent fault.. Fuckin hell what a horrible thing to drive with the 17" low profile runflats. I actually have lower back pain now 😂 Kumho PS71 tyres improve the ride and handling rather a lot over the run flats they're blighted with from the factory. Kumho PS71 are a decent tyre at a more sensible price. They're not run flats... RoverFolkUs and GrumpiusMaximus 2 Link to comment Share on other sites More sharing options...
brownnova Posted November 25, 2023 Share Posted November 25, 2023 Why do even simple jobs not go well… To investigate which part of the ignition was fucked on the 2CV I cracked out the multimeter and set to checking the coil using a guide on Harley Davidson Coils online as that’s what’s been fitted as an upgrade. All fine there according to the figures on the guide. So I decided to pull the leads and get the plugs out. But one lead pulled the metal end out of its rubber sleeve and left the rubber end stuck in the hole, stuck solid. No amount of tugging and implements have freed it. So going to have to remove the wing to get a better angle. Fucksake. Rust Collector, grogee, Coprolalia and 3 others 6 Link to comment Share on other sites More sharing options...
Popsicle Posted November 25, 2023 Share Posted November 25, 2023 5 minutes ago, brownnova said: Why do even simple jobs not go well… To investigate which part of the ignition was fucked on the 2CV I cracked out the multimeter and set to checking the coil using a guide on Harley Davidson Coils online as that’s what’s been fitted as an upgrade. All fine there according to the figures on the guide. So I decided to pull the leads and get the plugs out. But one lead pulled the metal end out of its rubber sleeve and left the rubber end stuck in the hole, stuck solid. No amount of tugging and implements have freed it. So going to have to remove the wing to get a better angle. Fucksake. I feel your pain - this happened when I tried to sort out a misfire on daughter number ones Beetle. Which resulted in having to remove the inlet manifold to change the leads. No five minute job goes unpunished. grogee 1 Link to comment Share on other sites More sharing options...
wuvvum Posted November 25, 2023 Share Posted November 25, 2023 At least 2CV wings are easy to remove. brownnova 1 Link to comment Share on other sites More sharing options...
wuvvum Posted November 25, 2023 Share Posted November 25, 2023 4 hours ago, RoverFolkUs said: Looks like they didn't double flare the failed pipe, definitely worth going over the rest and redoing it all if they've made the same mistake on all the other ones. I made that mistake once. Fortunately I noticed before I fitted the pipe to the car... RoverFolkUs 1 Link to comment Share on other sites More sharing options...
RoverFolkUs Posted November 25, 2023 Share Posted November 25, 2023 12 minutes ago, wuvvum said: I made that mistake once. Fortunately I noticed before I fitted the pipe to the car... Very easily done. Almost as easily as making the most perfect flares you've ever seen on both ends while the unions are still chilling on your work bench 🙄😂 dome, Momentary Lapse Of Reason, Rust Collector and 7 others 8 2 Link to comment Share on other sites More sharing options...
wesacosa Posted November 25, 2023 Share Posted November 25, 2023 Sadly the only FSO/Polski Fiat's I have seen in Lodz this weekend Rust Collector and Shep Shepherd 1 1 Link to comment Share on other sites More sharing options...
GeordieInExile Posted November 25, 2023 Share Posted November 25, 2023 That is not a happy C6. Where someone's bodged that pipe previously, it cracked. The crack has completely split. And... you can see the result. It made it to Durham and back today with a *lot* of water being tipped into it, but the pipe finally gave up the ghost on the way back home. Straight into a garage next week to get it fixed properly, which someone didn't bother to do last time it went. Known failure point on these so a new one will at least mean peace of mind for me. For a while. richardmorris, grogee, GrumpiusMaximus and 2 others 2 3 Link to comment Share on other sites More sharing options...
Talbot Posted November 25, 2023 Share Posted November 25, 2023 6 hours ago, RoverFolkUs said: Looks like they didn't double flare the failed pipe, definitely worth going over the rest and redoing it all if they've made the same mistake on all the other ones. Not only had the flares not been made as a double flares, and hence the tube had split, but the pipe from the 4-way to the NSF had been in contact with a steel oil pipe on the engine and had worn all the way through. Also the bends had all been hand-bent, so one of the tight ones into the union was folded almost flat. Pretty crap install really. Replacement pipe has double flares both ends, bends formed with a tube bender, and most importantly isn't rubbing! GrumpiusMaximus, mercedade, Floatylight and 11 others 10 2 2 Link to comment Share on other sites More sharing options...
Popsicle Posted November 25, 2023 Share Posted November 25, 2023 Service time this afternoon for the couriering Caddy, nothing strenuous just an oil and filter change. Updated my sadgit spreadsheat and noticed it was the 20th service I'd done on the old girl, acquired at 125k now on 338k, so I treated it and wiped all the crap and dirt off the back lights and number plate. Dyslexic Viking, GrumpiusMaximus, Wibble and 2 others 5 Link to comment Share on other sites More sharing options...
High Jetter Posted November 25, 2023 Share Posted November 25, 2023 2 hours ago, RoverFolkUs said: Very easily done. Almost as easily as making the most perfect flares you've ever seen on both ends while the unions are still chilling on your work bench 🙄😂 Or realising they're both on the wrong way round (yea, I did, once) dome, Rust Collector, RoverFolkUs and 1 other 2 2 Link to comment Share on other sites More sharing options...
Wibble Posted November 26, 2023 Share Posted November 26, 2023 23 minutes ago, High Jetter said: Or realising they're both on the wrong way round (yea, I did, once) If we’re honest, I reckon we’ve all done something like this 🙄 Bren 1 Link to comment Share on other sites More sharing options...
High Jetter Posted November 26, 2023 Share Posted November 26, 2023 12 minutes ago, Wibble said: If we’re honest, I reckon we’ve all done something like this 🙄 See also: cable and wire connectors & insulators. Wibble and grogee 2 Link to comment Share on other sites More sharing options...
grogee Posted November 26, 2023 Share Posted November 26, 2023 On 23/11/2023 at 22:46, Spottedlaurel said: I'm wondering if what I thought was a misfire is a slight issue with the 'box in overdrive/lockup - it has a slightly 'shunty' feel which isn't evident in the lower ratios. Much better than it was however, so maybe it just wants regular use and perhaps some fresh ATF? This is my issue with my 525i. It's definitely the lockup. But can't tell if it's a solenoid or actual clutch problem. The clutch is hidden in the torque converter. I've got a 2nd hand box and TC to fit which is next weekends' job, fortunately in an indoor setting with lift. Link to comment Share on other sites More sharing options...
grogee Posted November 26, 2023 Share Posted November 26, 2023 17 hours ago, beko1987 said: ARSE in action one again, nice job guys 👍 Sorry did I miss something? Where can I get some arse action? beko1987 1 Link to comment Share on other sites More sharing options...
Rustybullethole Posted November 26, 2023 Share Posted November 26, 2023 Todays wheels primed and ready. Just cooking some kippers whilst I wait for the youngest to get out of bed then off to cycle along the coast path. Semi-C, reb, JMotor and 4 others 7 Link to comment Share on other sites More sharing options...
Spottedlaurel Posted November 26, 2023 Share Posted November 26, 2023 1 hour ago, grogee said: This is my issue with my 525i. It's definitely the lockup. But can't tell if it's a solenoid or actual clutch problem. The clutch is hidden in the torque converter. I've got a 2nd hand box and TC to fit which is next weekends' job, fortunately in an indoor setting with lift. Good luck! It's gradually improving on mine, and it's something that seems to be less evident once it's really, properly warmed-up. grogee 1 Link to comment Share on other sites More sharing options...
juular Posted November 26, 2023 Share Posted November 26, 2023 Nice light show here last night. We could see it from the front door even with the bright modern street lights. At the edge of the village it was lovely. MrsJuular, Sunny Jim, sdkrc and 24 others 27 Link to comment Share on other sites More sharing options...
grogee Posted November 26, 2023 Share Posted November 26, 2023 52 minutes ago, juular said: Nice light show here last night. We could see it from the front door even with the bright modern street lights. At the edge of the village it was lovely. Where is that? It's lovely Rustybullethole 1 Link to comment Share on other sites More sharing options...
beko1987 Posted November 26, 2023 Share Posted November 26, 2023 2 hours ago, grogee said: Sorry did I miss something? Where can I get some arse action? Should be in the lexicon somewhere. Autoshite Recovery Service Etc grogee and Floatylight 2 Link to comment Share on other sites More sharing options...
juular Posted November 26, 2023 Share Posted November 26, 2023 37 minutes ago, grogee said: Where is that? It's lovely At the end of the street here on the outskirts of Falkirk, looking towards Stirling / the Ochil hills. grogee, Rustybullethole and Barry Cade 3 Link to comment Share on other sites More sharing options...
juular Posted November 26, 2023 Share Posted November 26, 2023 28 minutes ago, beko1987 said: Should be in the lexicon somewhere. Autoshite Recovery Service Etc I understood it as Autoshite Recovery Shite-shifting Etc beko1987 and Talbot 2 Link to comment Share on other sites More sharing options...
beko1987 Posted November 26, 2023 Share Posted November 26, 2023 12 minutes ago, juular said: I understood it as Autoshite Recovery Shite-shifting Etc I agree with you more now you've said it 👍 juular 1 Link to comment Share on other sites More sharing options...
trigger Posted November 26, 2023 Share Posted November 26, 2023 Had a silly bollocks moment and decided to sell my trusty old diesel Skoda Fabia that I've had for 5 painless years due to boredom and bought a newer Ford Focus from a garage Nice car, well equipped, ticks all the boxes for a cheap to run work hack etc I went to collect it yesterday from just over a hour away, firstly it wasn't very clean which the garage apologised for and then it had 30 miles of fuel left which again they apologised about but I made it clear I wasn't happy, especially as the nearest petrol station was a good 20 mins away, Thankfully I managed to full up ok only for it to go into limp mode as soon as I hit the A120 🙄 It did this 3 times after shutting it down and restarting it with a rough idle and smoke, FFS. Garage said to bring it back and they'll fix it for me and will clean it properly now too and given me this Ssangyong Komodo thing to use until it's fixed I shouldn't complain as it could have been worse but what a shit car, bonnet shakes at 70mph, it's far too big and bloated for a 5 seater SUV and it keeps bing bonging all the time. loserone, sdkrc, Rust Collector and 7 others 1 9 Link to comment Share on other sites More sharing options...
loserone Posted November 26, 2023 Share Posted November 26, 2023 Never. Sell. A. Fabia. Are you listening @davehedgehog31? paulplom, GrumpiusMaximus and trigger 2 1 Link to comment Share on other sites More sharing options...
juular Posted November 26, 2023 Share Posted November 26, 2023 Replaced a front wheel bearing on the Trafic. One of those hub off and press jobs. Now have an abs fault. Rather grumpy about this as the abs ring is part of the bearing and I spent extra to get a branded FAG bearing. Live data looks like this. As it's not a regular dropout I'm thinking / hoping it's not the bearing. This should really be in the grumpy thread. sdkrc, GMcD, Dyslexic Viking and 5 others 8 Link to comment Share on other sites More sharing options...
brownnova Posted November 26, 2023 Share Posted November 26, 2023 A new cars and coffee started this weekend… yes, in November…. A decent turn out, and a combination of chavved up Focus/3-Series and some nice cars.. As a bonus on the way home I went the long way round and I spotted this! AnnoyingPentium, richardmorris, Tickman and 19 others 22 Link to comment Share on other sites More sharing options...
Rustybullethole Posted November 26, 2023 Share Posted November 26, 2023 Love that fez with the old school Sainsbury's stripes. wesacosa 1 Link to comment Share on other sites More sharing options...
RoverFolkUs Posted November 26, 2023 Share Posted November 26, 2023 1 hour ago, juular said: Replaced a front wheel bearing on the Trafic. One of those hub off and press jobs. Now have an abs fault. Rather grumpy about this as the abs ring is part of the bearing and I spent extra to get a branded FAG bearing. Live data looks like this. As it's not a regular dropout I'm thinking / hoping it's not the bearing. This should really be in the grumpy thread. Installation damage to the bearing I would say unfortunately. It happens. Link to comment Share on other sites More sharing options...
juular Posted November 26, 2023 Share Posted November 26, 2023 40 minutes ago, RoverFolkUs said: Installation damage to the bearing I would say unfortunately. It happens. Wouldn't that manifest as a regular dropout if the magnetic ring was damaged? I didn't have any problems pressing it in, it went in like butter. I'm thinking more that the abs sensor clip that came with it is absolutely shocking causing the sensor to wobble. I should have put the old one back in! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now