RoverFolkUs Posted December 22, 2023 Share Posted December 22, 2023 8 minutes ago, Nyphur said: Thinking about this more..... When I had the nearside wheel off but the suspension loaded up I was wiggling the drop link about and thought I could maybe feel a tiny bit of play in it. So I lowered the jack and put the offside in the air too to compare - definitely no play felt, went back to the nearside again and now definitely no play felt their either, loaded up or not. Put the offisde back on the ground, and still could feel any play in the nearside link, loaded or not. I wonder if there is a bit of play in it and I got lucky finding it that one time. Something else I forgot to mention (and have only just engaged my brain about...) is that I can induce the noise on a flat road by wobbling the wheel from side to side above 15mph or so. It doesn't do it stationary, so could be another pointer towards the drop link, or possibly the rack? A couple of more tips with that drop link then, place the palm of your hand under the anti roll bar end (not the ball joint) and try to push upwards, first gently and then with more force the second time. If that doesn't help, thwacking the end of the anti roll bar with a rubber mallet will either create an audible knock, or if not then potentially you'll feel a click in one of the joints, if there is any play I have had that before with slightly worn drop links where you feel a tiny click once and then it disappears. Even once you've taken the joint off you can only feel it if you really gently pop the ball joint in and out. Using any great force it will seem fine On the last point, I would be inclined to lean towards steering rack or top mount. Again, hopefully the steps in my previous post *might* help to narrow that down CGSB 1 Link to comment Share on other sites More sharing options...
RoverFolkUs Posted December 22, 2023 Share Posted December 22, 2023 @Nyphur another thought that's just popped into my head, is check the steering column UJs, I've had that before where they somehow wear out, it took quite a while to find! It's very unlikely but possible CGSB 1 Link to comment Share on other sites More sharing options...
Christine Posted December 23, 2023 Share Posted December 23, 2023 Worn slider pins on the brake caliper too . Micra k11 calilpers can clonk like fuck until they're shimmed up with a bit of coke can CGSB 1 Link to comment Share on other sites More sharing options...
greengartside Posted December 23, 2023 Share Posted December 23, 2023 What’s this??? this can mean only one thing…. She’s on the road! Frontline transport! I taxed and insured it last night. Only £27 a month TPFT and £17 a month for tax. A change in circumstances means I need to travel a lot more now and I don’t particularly want to knack up my nice Fiesta so I thought sod it, why not. It’s also better on fuel too. One small stumbling block before all this became a reality. One leather steering wheel procured from a 2002 Fiesta (a very early one to boot). Didn’t need the airbag as mine was all good. A quick YouTube sesh told me how to remove my old airbag and replace the wheel. A simple 10 minute job. 2 hours later I manage to wrestle the airbag off the wheel. The only issue was that I gorilla’d the airbag off and in the process, destroyed the airbag wiring plug which smashed into a million bits. Long story short is that £20 later, I now had a new airbag and wiring. The new one went on straight away and the airbag didn’t blow up in my face. Now on for the Christmas duties! What a car! chodweaver, mercedade, Rust Collector and 13 others 16 Link to comment Share on other sites More sharing options...
MrGTI6 Posted December 23, 2023 Share Posted December 23, 2023 Currently sat in the car opposite my house having a standoff with a middle-aged couple walking their two dogs stood outside my house. Their dogs have done a crap on the path outside my house and they clearly don't have the means to pick it up in a sanitary manner. They keep looking up from their phones to see that I haven't moved. I'm going to make this whole situation as awkward as possible. Jazoli, Tickman, Supernaut and 6 others 3 6 Link to comment Share on other sites More sharing options...
Jazoli Posted December 23, 2023 Share Posted December 23, 2023 22 minutes ago, MrGTI6 said: Currently sat in the car opposite my house having a standoff with a middle-aged couple walking their two dogs stood outside my house. Their dogs have done a crap on the path outside my house and they clearly don't have the means to pick it up in a sanitary manner. They keep looking up to see that I'm still sat in the car. I'm going to make this whole situation as time-consuming and awkward as possible for them. Still there? beko1987 1 Link to comment Share on other sites More sharing options...
SiC Posted December 23, 2023 Share Posted December 23, 2023 30 minutes ago, Nyphur said: It's definitely the drop link. Rocking it side to side on the ground I could feel a slight click through the top nut. With a hand on the bottom joint on the drop link and repeated shaking there's a very definite clunk to be felt. Thanks for your help. Droplinks are almost a regular service item on the Fabia/Ibiza/Polo that I think the Roomster is based on? Having a quick look at Wikipedia on the Roomster, it looks like VAG cut and shut the Fabia Mk1 platform on the front and the same platform as the Audi TT Mk1 on the rear 🤣 (Of course that platform on the rear had other, more similar users too) Link to comment Share on other sites More sharing options...
SiC Posted December 23, 2023 Share Posted December 23, 2023 4 minutes ago, Nyphur said: I didn't realise the rear was TT based. Also Golf Mk4/A3 Mk1/Leon Mk1/Octavia Mk1/etc which all make more sense but have less comedic value! chodweaver and CGSB 2 Link to comment Share on other sites More sharing options...
MrGTI6 Posted December 23, 2023 Share Posted December 23, 2023 1 hour ago, Jazoli said: Still there? A bit of an anti-climax I'm afraid. After 11 minutes, the lady walked over to my window and said her husband had forgotten to bring any bags, and wanted to know if I had anything she could use. I went back into the house and donated one of the many carrier bags we have under the stairs. In hindsight I should have charged 5p like the supermarkets do these days. She seemed pleasant and very talkative but her husband didn't say a word! I expect one of two things to happen going forward. Either they'll never let their dogs shit outside my house again, or they'll do it all the time now out of spite. cobblers, loserone, mercedade and 1 other 4 Link to comment Share on other sites More sharing options...
Rust Collector Posted December 23, 2023 Share Posted December 23, 2023 I once got caught out like that - my jacket had 3 poo bags in and I reckoned that’d see me right with only 1 dog at the time. He then did 4 separate shits on one walk. Luckily* the last one was near a bin and I had a McDonald’s serviette in my other pocket… MrGTI6, Tickman, chodweaver and 2 others 1 3 1 Link to comment Share on other sites More sharing options...
brownnova Posted December 23, 2023 Share Posted December 23, 2023 Finally shifted the stubborn ht lead on the 2CV. Several overnight applications of WD40 and liberal plier action hadn’t done it, heat and levering it off with a screwdriver did in the end! Never ever had one stuck like that before. Stinkwheel and eifion 2 Link to comment Share on other sites More sharing options...
greengartside Posted December 23, 2023 Share Posted December 23, 2023 Last one, I promise. Decided to treat the old girl to a car wash and I then hoovered the inside out and made it smell a bit nicer. Rocker cover gasket turned up today so that’s the next job. JMotor, SiC, Coprolalia and 12 others 15 Link to comment Share on other sites More sharing options...
wuvvum Posted December 23, 2023 Share Posted December 23, 2023 Drove down to Somerset today to visit my parents for Christmas. Was dreading the journey having listened to all the dire warnings about OMGtrafficchaos, but ended up doing the 250 mile drive in 5 1/2 hours, including a 20 minute stop for lunch. Ampera seems to have used a bit more fuel than usual, but then there was a quite enthusiastic headwind for most of the journey. sdkrc, lesapandre, Stevebrookman and 2 others 5 Link to comment Share on other sites More sharing options...
Metal Guru Posted December 24, 2023 Share Posted December 24, 2023 10 hours ago, Rust Collector said: I once got caught out like that - my jacket had 3 poo bags in and I reckoned that’d see me right with only 1 dog at the time. He then did 4 separate shits on one walk. Luckily* the last one was near a bin and I had a McDonald’s serviette in my other pocket… I caught sight of McDonald’s before I read it. I was anticipating the story said you left the last shit in situ and hoped it was mistaken for a piece of McDonalds burger. Christine and chodweaver 2 Link to comment Share on other sites More sharing options...
chadders Posted December 25, 2023 Share Posted December 25, 2023 On 23/12/2023 at 13:59, Nyphur said: I've not needed to fit any since I got the car in 2020 fortunately but ordered a pair up. Yeah it's a Fabia MK1 from the dash forwards apparently - the Fabia Haynes manual does the job for most stuff. I didn't realise the rear was TT based. Ours is a 2013 one that we've had since 2017 and not had to replace them. The only repair it's needed is a clutch cylinder. CGSB 1 Link to comment Share on other sites More sharing options...
lesapandre Posted December 25, 2023 Share Posted December 25, 2023 On 23/12/2023 at 23:45, wuvvum said: Drove down to Somerset today to visit my parents for Christmas. Was dreading the journey having listened to all the dire warnings about OMGtrafficchaos, but ended up doing the 250 mile drive in 5 1/2 hours, including a 20 minute stop for lunch. Ampera seems to have used a bit more fuel than usual, but then there was a quite enthusiastic headwind for most of the journey. Yea - I followed all the OMG the world is ending warnings. Tickled that both the RAC and AA were heavily featured in the press releases picked up by media as both are private businesses who want to drum up breakdown business. Didn't hear anything from the Highways Agency? The real-time BBC traffic reports are provided by this US company: https://inrix.com/products/speed/ The BBC should have been in a position to make congestion predictions on the data they have purchased under their contract - I think the Highways Agency get their data from the same place. The kind of jeopardy being peddled must have a chilling effect on everyday life. As usual with a lot of what is in the media - it needs to be taken with a massive pinch of scepticism, even on the BBC these days - that seems riddled with 'click bait' - and promoting vested interests or political hobby-horses. I find the live updates by the Highways Agency on X (Twitter) work ok - but that has it problems😂 Rust Collector and Matty 1 1 Link to comment Share on other sites More sharing options...
lesapandre Posted December 25, 2023 Share Posted December 25, 2023 Had enough of the in-laws and TV? Escape to Leamington Spa - and it's comprehensive motoring past - on this well put together website: https://motoringhistorylw.com/ 🦃🌲🍗🎄🥂 chodweaver 1 Link to comment Share on other sites More sharing options...
stuboy Posted December 25, 2023 Share Posted December 25, 2023 bar xmas shizzle.. a new fuel filter for the galaxy and keeps bogging down as if fuel amount restricted unless cold start Link to comment Share on other sites More sharing options...
RoverFolkUs Posted December 26, 2023 Share Posted December 26, 2023 So, MOT in the morning. Cleaned + hoovered inside - check ✅ Cleaned outside - [will stop off at the Shell jetwash on the way there...] Check ✅ Emptied out of rubbish and clutter - check ✅ Lights, levels etc - Check ✅ All the main repairs done, such as the suspension and welding - Check ✅ Rectify last year's only advisory - Check ✅ Fix that loose rear number plate.... Ahhh fucksticks... I knew there'd be something I'd forget 🥲 Scurrying around indoors for my double sided foam tape... Obviously it's gone missing and can't be found. Found the next best thing - some ancient looking Halfords branded number plate adhesive strips.. except they don't 😂 Now, do I - Leave it, which may or may not get an advisory which will eternally bother me Take the number plate off, clean off all the old residue and start again IF I can find the adhesive tape.. this does run the risk of having a removed number plate which I have no way of reattaching less than an hour before the test... Peering underneath I can see the factory screw fittings which would appear to have snapped, and someone has attempted to drill through them and given up half way. Do I attempt to rectify this? Time is of the essence I could just leave it the fuck alone, but getting a silly advisory for something like that would bother me to an insane degree. I will lose sleep over it. Link to comment Share on other sites More sharing options...
adw1977 Posted December 26, 2023 Share Posted December 26, 2023 Leave it alone. Better to get an advisory than risk a fail for it being not attached at all. JMotor and RoverFolkUs 2 Link to comment Share on other sites More sharing options...
stuboy Posted December 26, 2023 Share Posted December 26, 2023 3 hours ago, RoverFolkUs said: So, MOT in the morning. Cleaned + hoovered inside - check ✅ Cleaned outside - [will stop off at the Shell jetwash on the way there...] Check ✅ Emptied out of rubbish and clutter - check ✅ Lights, levels etc - Check ✅ All the main repairs done, such as the suspension and welding - Check ✅ Rectify last year's only advisory - Check ✅ Fix that loose rear number plate.... Ahhh fucksticks... I knew there'd be something I'd forget 🥲 Scurrying around indoors for my double sided foam tape... Obviously it's gone missing and can't be found. Found the next best thing - some ancient looking Halfords branded number plate adhesive strips.. except they don't 😂 Now, do I - Leave it, which may or may not get an advisory which will eternally bother me Take the number plate off, clean off all the old residue and start again IF I can find the adhesive tape.. this does run the risk of having a removed number plate which I have no way of reattaching less than an hour before the test... Peering underneath I can see the factory screw fittings which would appear to have snapped, and someone has attempted to drill through them and given up half way. Do I attempt to rectify this? Time is of the essence I could just leave it the fuck alone, but getting a silly advisory for something like that would bother me to an insane degree. I will lose sleep over it. just drop it off, go get a hot drink . RoverFolkUs and JMotor 2 Link to comment Share on other sites More sharing options...
Wibble Posted December 26, 2023 Share Posted December 26, 2023 Blue tack for now, then join me in my mission to go and find Fuck. Fuck is a jammy cunt that we’ve all been doing things for, for years. He/she does bugger all for themselves but everything we do is for their sake. Well I, for one, have had enough and we need to track them down and make them pay for the pain we’ve all endured doing things for their sake all these years. Good luck for the MOT! RoverFolkUs 1 Link to comment Share on other sites More sharing options...
RoverFolkUs Posted December 26, 2023 Share Posted December 26, 2023 4 hours ago, adw1977 said: Leave it alone. Better to get an advisory than risk a fail for it being not attached at all. 35 minutes ago, stuboy said: just drop it off, go get a hot drink . Sound advice, cheers chaps I'm more annoyed about not being able to find the fupping double sided tape.. Still won't stop me fiddling with it in the morning (oo'er etc 😂) - I think we have some 3M VHB at work which is pretty much the dogs bollocks for double sided adhesion, when it works. I've found it either bonds so well that you can barely get it off or it simply doesn't stick, at all! So I *might* give that a go. I should be able to get enough behind it without removing the plate altogether 2 minutes ago, Wibble said: Blue tack for now, then join me in my mission to go and find Fuck. Fuck is a jammy cunt that we’ve all been doing things for, for years. He/she does bugger all for themselves but everything we do is for their sake. Well I, for one, have had enough and we need to track them down and make them pay for the pain we’ve all endured doing things for their sake all these years. Good luck for the MOT! Sounds fun! Might join in.. Thanks Link to comment Share on other sites More sharing options...
JMotor Posted December 26, 2023 Share Posted December 26, 2023 39 minutes ago, stuboy said: just drop it off, go get a hot drink . This. Just overthinking it @RoverFolkUs. Let the tester tell you what else it needs. Started thinking like that now. It's made life easier(ISH) for me. RoverFolkUs 1 Link to comment Share on other sites More sharing options...
RoverFolkUs Posted December 26, 2023 Share Posted December 26, 2023 6 minutes ago, JMotor said: This. Just overthinking it @RoverFolkUs. Let the tester tell you what else it needs. Started thinking like that now. It's made life easier(ISH) for me. Thank you, he's a very fair bloke. If it needs to fail it will fail, if he can get away with passing it he will. My only advisory last year was for discoloured indicator bulbs (I had replaced the fronts only thinking the rears were ok..) so you might be able to imagine how much that has bugged me ever since.. 😅 I'm aiming for a clean sheet.. else I don't mind it failing because then I can sort out the advisories.. I just hate *nearly* getting a clean sheet with one advisory which I've overlooked! As you say, I think I'm definitely overthinking it. In which case I think I'll drop it off, and wait patiently* while spamming the F5 button sipping tea and browsing Autoshite JMotor 1 Link to comment Share on other sites More sharing options...
JMotor Posted December 26, 2023 Share Posted December 26, 2023 Ha! I do the same when I send a car in for test 😆. Totally get where you are coming from, you want it to be right from the get go. Nowt wrong with that! Getting that advisory free pass is a nice feeling. Makes the effort worth it. But here! "She'll be reet lad" RoverFolkUs 1 Link to comment Share on other sites More sharing options...
stuboy Posted December 26, 2023 Share Posted December 26, 2023 wheres it going for the mot? Link to comment Share on other sites More sharing options...
SiC Posted December 26, 2023 Share Posted December 26, 2023 Is anyone finding the forum a bit slow today? (Or even the last few days) I'm finding it a bit slow at loading when navigating around. A quick check on the Load averages on the server are showing them higher than normal but not crazy high. Not sure if it's just that it's busy on here because Xmas, hosting providers is getting hammered (because Xmas) or something else is going on. Link to comment Share on other sites More sharing options...
stuboy Posted December 26, 2023 Share Posted December 26, 2023 2 minutes ago, SiC said: Is anyone finding the forum a bit slow today? (Or even the last few days) I'm finding it a bit slow at loading when navigating around. A quick check on the Load averages on the server are showing them higher than normal but not crazy high. Not sure if it's just that it's busy on here because Xmas, hosting providers is getting hammered (because Xmas) or something else is going on. seems ok to me adw1977 and SiC 1 1 Link to comment Share on other sites More sharing options...
High Jetter Posted December 26, 2023 Share Posted December 26, 2023 Less posts than usual, I'd say - cos of life/crimbo/families maybe Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now