New POD Posted August 30, 2018 Share Posted August 30, 2018 I’d never spotted that before. Bizarrely, the proportions of the lights look equally at home in the Maestro van as they do on the considerably larger Disco. Weird. Great to see one of these on here - must be almost ready to drive!Not weird at all. land rover made great press when they launched the disco about how quickly they went from concept to production. one major thing for us engineers is that they went straight from a CAD model to cutting the tool for the roof without building any clay models, or scale models.They saved alot of time and engineering resource but using as much as they could from other British Leyland cars. Iirc the chassis is pretty much a range rover. So onto the rear lights. The stylist/ designer freely admitted at the time that he'd used the ones from a maestro van and that was what forced the design of the rear uprights for the disco. And because they have tried to keep a connection the series 2 and 3 Discos have the same shape but not the actual lights. Strange that they were then too high for some markets and they had to put some lights in the rear bumper too. In OLLI circles the thing to do is put bulbs and wiring to them and throw the ones away from the bumper. will16, Squirrel2 and Dick Longbridge 3 Link to comment Share on other sites More sharing options...
will16 Posted August 30, 2018 Author Share Posted August 30, 2018 Appreciate the kind words guys Its been a labour of love really, I'm eager to start using it properly. The Disco lights I've always put down to Rover being cheap..Clever though and Mk1 discovery's werent bad cars Loads of work done in a short period. Well done.What is this? a bit of dexion, but why?It was being used as a rear shock mount It wasnt particually welded in well, I took the bolt out and snapped it off with my hands.. Just remembered there is this H-plater in my local scrappers at the moment. Ideal for spares.... Nice! What yard is this?! Might have to go scavenging Remspoor 1 Link to comment Share on other sites More sharing options...
greengartside Posted August 30, 2018 Share Posted August 30, 2018 Nice! What yard is this?! Might have to go scavengingIt’s a small yard in South Norfolk, not sure whereabouts you are from though? Link to comment Share on other sites More sharing options...
Noel Tidybeard Posted September 5, 2018 Share Posted September 5, 2018 Not weird at all. land rover made great press when they launched the disco about how quickly they went from concept to production.one major thing for us engineers is that they went straight from a CAD model to cutting the tool for the roof without building any clay models, or scale models.They saved alot of time and engineering resource but using as much as they could from other British Leyland cars.Iirc the chassis is pretty much a range rover.So onto the rear lights. The stylist/ designer freely admitted at the time that he'd used the ones from a maestro van and that was what forced the design of the rear uprights for the disco. And because they have tried to keep a connection the series 2 and 3 Discos have the same shape but not the actual lights.Strange that they were then too high for some markets and they had to put some lights in the rear bumper too.In OLLI circles the thing to do is put bulbs and wiring to them and throw the ones away from the bumper. the bumper lights was a UK thing afaik - at the time the law said tail lights and hazards must be visible with boot open (or somthing like that) so discos, vitaras, isuzus etc with the spare on the door had to have lights moved or duplicated the law got changed or relaxed some time after inconsistant 1 Link to comment Share on other sites More sharing options...
Angrydicky Posted September 6, 2018 Share Posted September 6, 2018 +1 on yard location please GG, I need the passenger side door mirror if its any good. Link to comment Share on other sites More sharing options...
will16 Posted September 6, 2018 Author Share Posted September 6, 2018 It’s a small yard in South Norfolk, not sure whereabouts you are from though?I’m in bloody Oxford, so quite a trek! Thank you though Link to comment Share on other sites More sharing options...
greengartside Posted September 6, 2018 Share Posted September 6, 2018 +1 on yard location please GG, I need the passenger side door mirror if its any good.It’s the same yard as the Mazda 929 that was rescued, in fact the Maestro was parked in front of it. David Yarham Salvage - 01508 482612. It’s on the road between Bungay and Norwich. Angrydicky and will16 2 Link to comment Share on other sites More sharing options...
cort1977 Posted September 6, 2018 Share Posted September 6, 2018 the bumper lights was a UK thing afaik - at the time the law said tail lights and hazards must be visible with boot open (or somthing like that) so discos, vitaras, isuzus etc with the spare on the door had to have lights moved or duplicated the law got changed or relaxed some time afterThink Australia also has something in the ADRs about this, in case those big twin spare wheel carriers are fitted. Link to comment Share on other sites More sharing options...
Pillock Posted September 6, 2018 Share Posted September 6, 2018 Not so much when the rear door is open, but you must be able to see both left and right hand lamps when you're stood off to one side. Spare wheel blocks the view, so into the bumper they go. Link to comment Share on other sites More sharing options...
MorrisItalSLX Posted September 6, 2018 Share Posted September 6, 2018 Think Australia also has something in the ADRs about this, in case those big twin spare wheel carriers are fitted. Yep, ADRs require bumper mount tail lights if there is a rear mount spare wheel. Link to comment Share on other sites More sharing options...
greengartside Posted September 8, 2018 Share Posted September 8, 2018 I went to have a look at the Maestro van earlier, the passenger mirror is in great condition. I have removed it and sat it on the passenger seat should Angrydicky wish to purchase it. I didn’t ask a price as I was in a hurry this morning. Pics. Vince70 and michael t 2 Link to comment Share on other sites More sharing options...
will16 Posted October 16, 2018 Author Share Posted October 16, 2018 Another little update.. I've started driving it!! Impressions are that its not as slow as I seem to remember (but still slow), not as noisy as I thought it would be (but still sounds like a tractor). Its done about 450 miles since the start of the month, I'm slowly adding to the 233k its already got, bulk of that was a trip from Oxford to Norwich for a 13b engine for my mazda, which it coped with fine, the rest I've just been pottering about in it, I do quite enjoy it . However, we've recently had alot of heavy rain and I'd noticed that the passenger footwell was getting soaked. And then I realised that the drivers was just as bad. And then I remembered the MOT runs out at the end of the month . This concerns me greatly as i know it needs a fair bit doing. Windscreen, crack over 40mm in the wiper area, wont just be the screen though as I guarantee there will be rust under the seal like every other maestro (Probably where the rains getting in??). Rust, every time I look underneath I see another bit and theres quite a few previous repairs with non magnetic materials. Handbrake, is shocking, I'd imagine its needs shoes, maybe the handbrake arm has seized? Oh and there was a brake fluid leak, would go down very gradually, and I couldnt find any leak, until driving home today when slowing for a junction my foot basically went to the floor Found the leak, where a line has rusted and pinholed, of course all the fittings were well and truly seized so I cut the line and used sockets. All of this greatly annoyed me, to the point where I was going to get rid of the bastard thing and get something else. But really I want my own van, got to be retro and if this one needs these things doing, others are likely to. That and I cant find an Astramax for love not money Enough of my moaning, I took some rubbish pics, MOT booked for 3rd November... Yoss and michael t 2 Link to comment Share on other sites More sharing options...
sierraman Posted October 16, 2018 Share Posted October 16, 2018 Just read the 2001 ‘Maestro Expose’ in Car Mechanics. Pete Simpson goes on to say buy them and run them into the ground. will16 1 Link to comment Share on other sites More sharing options...
New POD Posted October 17, 2018 Share Posted October 17, 2018 Not so much when the rear door is open, but you must be able to see both left and right hand lamps when you're stood off to one side. Spare wheel blocks the view, so into the bumper they go.And there was me thinking it was about the height. Link to comment Share on other sites More sharing options...
will16 Posted October 20, 2018 Author Share Posted October 20, 2018 Thought I'd treat myself to an saturday afternoon of mechanics, by replacing the burst brake line. After I'd spent £50 on a bender and some tube, had to redo 2 of the flares after I'd forgot to put the fittings on the pipe beforehand , I tried bleeding it. The bleed nipple was flud of crud so that was flushed, but I couldnt get any fluid through the bleed nipple. Crack all the connections and there was fluid going all the way into the cylinder, but not out. Am I right in thinking that this means it needs a new cylinder? The drum and shoes are pretty badly scored too. Think I'll put the drums on the lathe and buy new shoes. I'm also gonna buy new handbrake cables and try and get that locking too. I've sort of committed to it now, everyone thinks I'm mental Fancy new line.. Uncle Jimmy, Burnside, Scruffy Bodger and 4 others 7 Link to comment Share on other sites More sharing options...
vulgalour Posted October 21, 2018 Share Posted October 21, 2018 They're not making any new ones. Not even in China any more. So it's perfectly reasonable to save this 233k example. At least on here. CHODSPEED! will16, Uncle Jimmy and Lacquer Peel 3 Link to comment Share on other sites More sharing options...
Yoss Posted October 21, 2018 Share Posted October 21, 2018 I've only just found this thread. Cracking read. Good to see you're handy with spanners, welder etc... and even mention of a lathe. Just the sort of thing a van like this needs. Good job, thumbs up from me. LightBulbFun and will16 2 Link to comment Share on other sites More sharing options...
will16 Posted October 28, 2018 Author Share Posted October 28, 2018 They're not making any new ones. Not even in China any more. So it's perfectly reasonable to save this 233k example. At least on here. CHODSPEED! I've only just found this thread. Cracking read. Good to see you're handy with spanners, welder etc... and even mention of a lathe. Just the sort of thing a van like this needs. Good job, thumbs up from me. Thanks guys! That gives me some motive I think I found an old picture of my van from its early days, judging by the state of it I finished the rear brakes the other day, went for new drums in the end as I couldnt get a good enough finish on the old drums. New cylinders and shoes and the rear brakes are spot on, the handbrake is mean I also have taken care of the wobbly gear change. The old bushes were completely shot so I made some inserts from mild bar on the lathe and welded them in to the gear linkage, so the bolts are the pivots. Literally all the play gone and they shouldnt wear out anytime soon This weekend, as its halloween, I spent the weekend 50/50, being drunk and working on the maestro. MOT is next weekend, so I had the screen taken out Friday, after some 'wire wheel of truth' action I realised there was a hell of alot of corrosion. Both bottom corners, bits on the bottom rail in the middle, passenger a post and most of the top strip was properly holed. I'm no master fabricator when it comes to thin, rust sheet steel, but managed to get it looking something like it should. I've not taken too long to smooth and fill where its been welded, ran out of time as the new screen is booked for tomorrow.. I hope it fits in the hole vulgalour, Scruffy Bodger, Remspoor and 3 others 6 Link to comment Share on other sites More sharing options...
tooSavvy Posted October 28, 2018 Share Posted October 28, 2018 In production was the screen bonded onto the paint? .... Adhesion on your welded/repainted frame = how well screen is retained in hole ?? *Arna/Sud I believe were bond to untreated steel... Car rusted back from the glass :/ Link to comment Share on other sites More sharing options...
will16 Posted January 13, 2019 Author Share Posted January 13, 2019 I thought I should update this, alot has happened! MOT was passed first time, I couldnt believe it, almost fainted. Few minor advisories, front tyre worn, small hole in sump and load sensing valve stiff, I've sorted 2 of them already.. I was just driving it about apart from that, enjoying it, butttt I'll admit I was getting bored I'll admit, I'm a bit of a yob, and the 50hp of the mighty perkins wasnt cutting it, so I have put the Type R engine I've had sat around in. I grossly underestimated how much work it was going to be and it isnt actually finished yet, need to sort the front suspension and make up the cooling system but its going to be very fun motor when done. Bit of badge buggery and nice exhaust Burnside, Asimo, Dave_Q and 30 others 33 Link to comment Share on other sites More sharing options...
Mr_Bo11ox Posted January 13, 2019 Share Posted January 13, 2019 Holy shit!!!!! will16 and tooSavvy 2 Link to comment Share on other sites More sharing options...
paulscavalier Posted January 13, 2019 Share Posted January 13, 2019 I like it a maestro with warp drive will16 1 Link to comment Share on other sites More sharing options...
Dave_Q Posted January 13, 2019 Share Posted January 13, 2019 Well I guess you won't see another one like it at the local cruise? 14/10 top mentalling. will16 1 Link to comment Share on other sites More sharing options...
bigfella2 Posted January 14, 2019 Share Posted January 14, 2019 Just love how you make slipping a civic type r engine into a maestro can, sound just like most of us just changing an alternator or carrying out a service. Mental. Alusilber, Remspoor, Lacquer Peel and 5 others 8 Link to comment Share on other sites More sharing options...
oman5 Posted January 14, 2019 Share Posted January 14, 2019 Bloody hell. I had one of these years ago, I reckon your Perkins engine was pretty tired if it could only muster 80mph. I put a turbo diesel out of a montego in mine and it went like stink (relatively), but I can see you have the power situation well in hand. Torque steer much? will16 1 Link to comment Share on other sites More sharing options...
Ghosty Posted January 14, 2019 Share Posted January 14, 2019 I love it. LightBulbFun, will16 and oldcars 3 Link to comment Share on other sites More sharing options...
GrumpiusMaximus Posted January 14, 2019 Share Posted January 14, 2019 I have no idea what to think! Although if you ever have to race a BMW at the lights, it's a shame you don't have a rear view mirror because the looks on their faces would be priceless. will16 and LightBulbFun 2 Link to comment Share on other sites More sharing options...
Lacquer Peel Posted January 14, 2019 Share Posted January 14, 2019 When I read "Type R" I thought you meant R Series. That is superb!! Asimo, will16 and Pillock 3 Link to comment Share on other sites More sharing options...
MrSchwifty Posted January 14, 2019 Share Posted January 14, 2019 Flipping hell! I was just looking at a Maestro van thread on Retro Rides (some excellent styling mods on it, worth checking for inspiration). I thought turbo'ing one was mental enough but you sir have won at van!Glad to see the van fits your Honda by the way.... I'm in Oxford too, pop over for a brew/beer some time. Would love to check out the van! will16 1 Link to comment Share on other sites More sharing options...
oldcars Posted January 14, 2019 Share Posted January 14, 2019 Class. This is brilliant. will16 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now