Popular Post reb Posted July 31, 2021 Popular Post Share Posted July 31, 2021 As a lot of you are aware a couple of years ago I tried to stuff an HDI into my 205. This was going quite well* until my dad died last march and everything went out of the window. So now I'm left with a dismantled pug with lots of missing engine bits. This is not an ideal situation to say the least. So where do I start? I could track down all of the missing parts on eBay and the owners club, but that would mean actually figuring out what's missing and would probably take quite a while in any case, and the chance of finding out I'm missing something important during reassembly would be a massive pain in the arse. How about a complete engine? That sounds like it could work! Where will I be able to find one of them though? Well thankfully @DodgyBastardhas just the solution! So I'm now treating this as day 1 of my restoration* Step 1: Step 2 will be venturing out into the miserable weather to a secret* location to start the removal of the engine from the donor. Updates to follow! loserone, Scruffy Bodger, HMC and 47 others 50 Link to comment Share on other sites More sharing options...
Ahsan Posted July 31, 2021 Share Posted July 31, 2021 Will follow this thread keenly. Looking forward to the updates Sent from my Redmi Note 8 Pro using Tapatalk reb 1 Link to comment Share on other sites More sharing options...
Minimad5 Posted July 31, 2021 Share Posted July 31, 2021 Well done for mustering the motivation to get back onto it. Many pictures etc please wuvvum, Floatylight, LightBulbFun and 2 others 5 Link to comment Share on other sites More sharing options...
sdkrc Posted July 31, 2021 Share Posted July 31, 2021 There's no fucking about with that coffee. S T R O N G Lacquer Peel, PrinceRupert, loserone and 7 others 6 4 Link to comment Share on other sites More sharing options...
reb Posted July 31, 2021 Author Share Posted July 31, 2021 12 minutes ago, sdkrc said: There's no fucking about with that coffee. S T R O N G Over a decade of smoking has annihilated my taste buds, I need it this strong so I can taste it! It also drags me kicking and screaming into a state of being somewhat awake rather than the usual zombie like state without the insane amount of sugar in the energy drinks I used to use for the same purpose. GrumpiusMaximus 1 Link to comment Share on other sites More sharing options...
DodgyBastard Posted July 31, 2021 Share Posted July 31, 2021 Â We can move the car inside to avoid the rain, also the ramp might help with removal of the engine. Coprolalia, catsinthewelder, juular and 12 others 15 Link to comment Share on other sites More sharing options...
loserone Posted July 31, 2021 Share Posted July 31, 2021 What a view. One day my garden will look like that.   Ish. chaseracer, Twiggy, GrumpiusMaximus and 16 others 5 14 Link to comment Share on other sites More sharing options...
HMC Posted July 31, 2021 Share Posted July 31, 2021 reb, Dan302 and juular 3 Link to comment Share on other sites More sharing options...
garbaldy Posted July 31, 2021 Share Posted July 31, 2021  @loserone  Mine already does just diffent kinds of shite,   Take you pair half an hour to get that engine out as they're a dodle to work on especially with a lift maybe add 10 mins to take pics though 😉  reb, loserone and eddyramrod 3 Link to comment Share on other sites More sharing options...
juular Posted July 31, 2021 Share Posted July 31, 2021 Excellent, following with interest. Glad you've found the motivation to get this running. reb and sdkrc 2 Link to comment Share on other sites More sharing options...
reb Posted July 31, 2021 Author Share Posted July 31, 2021 Well, it's definitely an engine. Jim Bell, The Moog, Minimad5 and 12 others 15 Link to comment Share on other sites More sharing options...
Cookiesouwest Posted July 31, 2021 Share Posted July 31, 2021 Good luck with the project reb 1 Link to comment Share on other sites More sharing options...
reb Posted July 31, 2021 Author Share Posted July 31, 2021 That is an engine no longer attached to the car! Scruffy Bodger, Stanky, GrumpiusMaximus and 16 others 19 Link to comment Share on other sites More sharing options...
reb Posted July 31, 2021 Author Share Posted July 31, 2021 Loading ready for its journey to my unit  Minimad5, Six-cylinder, GrumpiusMaximus and 12 others 15 Link to comment Share on other sites More sharing options...
loserone Posted July 31, 2021 Share Posted July 31, 2021 Time to repeat the J Haynes mantra. Blake's Den 1 Link to comment Share on other sites More sharing options...
reb Posted July 31, 2021 Author Share Posted July 31, 2021 Assembly is the reverse of disassembly? loserone and GrumpiusMaximus 2 Link to comment Share on other sites More sharing options...
dome Posted July 31, 2021 Share Posted July 31, 2021 13 minutes ago, reb said: Assembly is the reverse of disassembly? Except you swear in different places privatewire, big_al_granvia, bunglebus and 5 others 4 4 Link to comment Share on other sites More sharing options...
stripped fred Posted July 31, 2021 Share Posted July 31, 2021 Hi Reb, is it a 2.0hdi and what was in the car before? Link to comment Share on other sites More sharing options...
reb Posted July 31, 2021 Author Share Posted July 31, 2021 52 minutes ago, stripped fred said: Hi Reb, is it a 2.0hdi and what was in the car before? The original engine was a 1.8 NA XUD, the original swap was going to be a 2.0 HDI but I ran into bother with fitment and electrics, the new engine is a 1.8 XUD but with a Bosch pump instead of the Lucas of the original. It's just simpler to use a complete known good engine rather than having to scrape together bits to refit an engine that sat outside for nearly 2 years. chaseracer, stripped fred, GrumpiusMaximus and 1 other 3 1 Link to comment Share on other sites More sharing options...
reb Posted July 31, 2021 Author Share Posted July 31, 2021 Next two things need to happen: - I need to get the HDI out of my 205s bay - I need to order a timing belt kit for the new engine One of these is far easier than the other. I watched a video on how to do the belt on an XUD and it seems far easier than it did the last time it was done, but I wasn't actually the one doing it last time so I don't know. Getting the HDI out shouldn't actually be terribly difficult to be honest because it's only hanging on the top two mounts and not wired or plumbed in. It is a big old lump to manoeuvre in and out of such a small car though. Hopefully that'll happen tomorrow. dome, GrumpiusMaximus, Coprolalia and 2 others 5 Link to comment Share on other sites More sharing options...
DodgyBastard Posted July 31, 2021 Share Posted July 31, 2021 Personally I'd just fit the engine and when it's drivable just farm out the timing belt replacement.Sent from my moto g( power using Tapatalk stripped fred 1 Link to comment Share on other sites More sharing options...
reb Posted July 31, 2021 Author Share Posted July 31, 2021 36 minutes ago, DodgyBastard said: Personally I'd just fit the engine and when it's drivable just farm out the timing belt replacement. Sent from my moto g( power using Tapatalk  That sounds terribly expensive for something I can do myself! Snake Charmer 1 Link to comment Share on other sites More sharing options...
DodgyBastard Posted July 31, 2021 Share Posted July 31, 2021 Â Coprolalia, Leyland Worldmaster, loserone and 7 others 10 Link to comment Share on other sites More sharing options...
Leyland Worldmaster Posted July 31, 2021 Share Posted July 31, 2021 26 minutes ago, DodgyBastard said:  Great song at the beginning of the video. Have you got any details of it please? 😎 Link to comment Share on other sites More sharing options...
DodgyBastard Posted August 1, 2021 Share Posted August 1, 2021 Great song at the beginning of the video. Have you got any details of it please? Song is by John k Samson from the album winter wheat and is called 17th Street treatment centre.He released a couple of albums as himself and a few more with his band the weakerthans.I'd recommend listening to any of their albums, they are one of the best bands nobody has ever heard of.Sent from my moto g( power using Tapatalk rainagain, reb, juular and 1 other 4 Link to comment Share on other sites More sharing options...
St.Jude Posted August 1, 2021 Share Posted August 1, 2021 22 hours ago, reb said: As a lot of you are aware a couple of years ago I tried to stuff an HDI into my 205. This was going quite well* until my dad died last march and everything went out of the window. So now I'm left with a dismantled pug with lots of missing engine bits. This is not an ideal situation to say the least. So where do I start? I could track down all of the missing parts on eBay and the owners club, but that would mean actually figuring out what's missing and would probably take quite a while in any case, and the chance of finding out I'm missing something important during reassembly would be a massive pain in the arse. How about a complete engine? That sounds like it could work! Where will I be able to find one of them though? Well thankfully @DodgyBastardhas just the solution! So I'm now treating this as day 1 of my restoration* Step 1: Step 2 will be venturing out into the miserable weather to a secret* location to start the removal of the engine from the donor. Updates to follow! Would you like any water for your coffee? Good luck with it, will be following this. Link to comment Share on other sites More sharing options...
reb Posted August 1, 2021 Author Share Posted August 1, 2021 1 hour ago, St.Jude said: Would you like any water for your coffee? No thank you, it's perfect already! Bay ready-ish to receive the new engine loserone, Dick Longbridge, LightBulbFun and 3 others 6 Link to comment Share on other sites More sharing options...
Supernaut Posted August 1, 2021 Share Posted August 1, 2021 That was quick! I was going to ask if you needed a hand next weekend but you'll be finished by then at this rate. Link to comment Share on other sites More sharing options...
reb Posted August 1, 2021 Author Share Posted August 1, 2021 31 minutes ago, Supernaut said: That was quick! I was going to ask if you needed a hand next weekend but you'll be finished by then at this rate. Next weekend would be handy for getting everything connected up! Unless I get a burst of motivation during the week of course. Nearly in! Scruffy Bodger, LightBulbFun, catsinthewelder and 6 others 9 Link to comment Share on other sites More sharing options...
reb Posted August 1, 2021 Author Share Posted August 1, 2021 In! juular, Cookiesouwest, Coprolalia and 17 others 20 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now