nisfan Posted September 25, 2017 Share Posted September 25, 2017 They don't need a Carlton do they? Haha Link to comment Share on other sites More sharing options...
DodgyBastard Posted September 25, 2017 Author Share Posted September 25, 2017 They don't need a Carlton do they? Haha It really depends if you can take a day off work at short notice. Link to comment Share on other sites More sharing options...
nisfan Posted September 25, 2017 Share Posted September 25, 2017 Ah right I take it they don't have set dates, could always pull a sickie Link to comment Share on other sites More sharing options...
oldcars Posted September 26, 2017 Share Posted September 26, 2017 Your cars are now worth loads more. "As seen in BBC drama" on car and classic must add more ££££ than paper KGF mats DodgyBastard, Lacquer Peel and RichardK 3 Link to comment Share on other sites More sharing options...
DodgyBastard Posted September 29, 2017 Author Share Posted September 29, 2017 I insured the rover today so thought I'd stick it on the ramp for a look, I ended up welding the exhaust then had a prod at the wheel arch and had to weld that too.. Sent from my F5321 using Tapatalk Lacquer Peel, The Moog, Mr Laurence and 2 others 5 Link to comment Share on other sites More sharing options...
DodgyBastard Posted September 29, 2017 Author Share Posted September 29, 2017 Some grey paint and it will be ok. DSC_0667 by srblythe, on Flickr I was planning on repairing it with genuine panels at some point but didn't imagine there would be a gaping hole in it after touching it lightly around the crusty bits so I thought I'd be as well patching it up for the time being. DSC_0669 by srblythe, on Flickr It looks like it might need a patch at the front wing on that side too, the other side looks fine. DSC_0665 by srblythe, on Flickr I hadn't actually planned on welding it today, it just kinda happened. The exhaust is almost silent so I reckon it will pass the mot in December. Jim Bell, Dirk Diggler, Tam and 4 others 7 Link to comment Share on other sites More sharing options...
DodgyBastard Posted September 29, 2017 Author Share Posted September 29, 2017 I disconnected the battery while welding.Does anyone know what the radio code is? Sent from my F5321 using Tapatalk Link to comment Share on other sites More sharing options...
Guest Hooli Posted September 29, 2017 Share Posted September 29, 2017 With that car, probably half the forum if they can remember. Link to comment Share on other sites More sharing options...
puddlethumper Posted September 29, 2017 Share Posted September 29, 2017 Don't suppose the filmers would be interested in a 305 van ? Link to comment Share on other sites More sharing options...
DodgyBastard Posted September 30, 2017 Author Share Posted September 30, 2017 Don't suppose the filmers would be interested in a 305 van ? They didn't want a 305 estate, the cars they want next are 2 white cars for police cars, a boy racer car and a mini. Link to comment Share on other sites More sharing options...
DodgyBastard Posted September 30, 2017 Author Share Posted September 30, 2017 How sad am I? Hanging around in the dark to get some quality pics of a shite car. DSC_0676-1 by srblythe, on Flickr DSC_0685 by srblythe, on Flickr DSC_0682-1 by srblythe, on Flickr The last one was a 5 minute exposure but I wish I had left it a lot longer to get some longer star trails... drum, Dirk Diggler, worldofceri and 9 others 12 Link to comment Share on other sites More sharing options...
DodgyBastard Posted September 30, 2017 Author Share Posted September 30, 2017 I disconnected the battery while welding.Does anyone know what the radio code is? 6501 for future reference. Lacquer Peel, Tam and loserone 3 Link to comment Share on other sites More sharing options...
omegod Posted September 30, 2017 Share Posted September 30, 2017 I'm made up to see it getting some metalwork done, you may notice the filler in the wing has a sparkle to it, the result of some last minute bodgery at 5:30 am in minus 6 to get it through the last MOT, copper grease on a rear caliper then filling the slightly jagged wing. Did you find the radio code? Edit :You found it then DodgyBastard 1 Link to comment Share on other sites More sharing options...
Dirk Diggler Posted September 30, 2017 Share Posted September 30, 2017 I've been admiring this 505 for a few weeks; it's a lovely spec but the price looks a little salty, but then again, I haven't seen one for sale for years https://www.donedeal.ie/vintagecars-for-sale/1989-peugeot-505-gtd-turbo-auto/16425414 DodgyBastard 1 Link to comment Share on other sites More sharing options...
DodgyBastard Posted October 1, 2017 Author Share Posted October 1, 2017 Rover concerto? Sent from my F5321 using Tapatalk Link to comment Share on other sites More sharing options...
twosmoke300 Posted October 1, 2017 Share Posted October 1, 2017 Leslie still there is he ? Must be quite an age by now Link to comment Share on other sites More sharing options...
DodgyBastard Posted October 1, 2017 Author Share Posted October 1, 2017 Leslie still there is he ? Must be quite an age by now Yeah, Leslie is still there, he's around 80 now but still sharp as ever. Link to comment Share on other sites More sharing options...
The Moog Posted October 1, 2017 Share Posted October 1, 2017 Those pictures look ace, especially the last one. DodgyBastard 1 Link to comment Share on other sites More sharing options...
DodgyBastard Posted October 1, 2017 Author Share Posted October 1, 2017 I covered 300 miles in this today. DSC_0729 by srblythe, on Flickr To have a look at how easy it is to convert it into a Concerto. DSC_0718 by srblythe, on Flickr I would need the lights, indicators, wings, bumpers, bonnet and grille. I'm not sure if I can really be bothered! Jim Bell 1 Link to comment Share on other sites More sharing options...
Tam Posted October 1, 2017 Share Posted October 1, 2017 I covered 300 miles in this today. DSC_0729 by srblythe, on Flickr To have a look at how easy it is to convert it into a Concerto. DSC_0718 by srblythe, on Flickr I would need the lights, indicators, wings, bumpers, bonnet and grille. I'm not sure if I can really be bothered!Think Mr Vulg looked into doing it as well. Hoping your getting on well with it and the welder doesn't have too much work to do Link to comment Share on other sites More sharing options...
Guest Hooli Posted October 1, 2017 Share Posted October 1, 2017 I covered 300 miles in this today. DSC_0729 by srblythe, on Flickr To have a look at how easy it is to convert it into a Concerto. DSC_0718 by srblythe, on Flickr I would need the lights, indicators, wings, bumpers, bonnet and grille. I'm not sure if I can really be bothered! I can't see why you'd bother tbh. Ghosty 1 Link to comment Share on other sites More sharing options...
DodgyBastard Posted October 1, 2017 Author Share Posted October 1, 2017 I can't see why you'd bother tbh. Aesthetic reasons. Link to comment Share on other sites More sharing options...
Guest Hooli Posted October 1, 2017 Share Posted October 1, 2017 Exactly my point, they look almost the same & it's a lot of work for no major change. Ghosty 1 Link to comment Share on other sites More sharing options...
Pillock Posted October 1, 2017 Share Posted October 1, 2017 Sometimes the reason to do things is there's no real reason to do it. Jim Bell, The Moog, AMC Rebel and 1 other 4 Link to comment Share on other sites More sharing options...
Dick Longbridge Posted October 1, 2017 Share Posted October 1, 2017 Your R8 has listed car status. Major changes such as turning it Japanese would need to be run past Autoshite Heritage Trust. I'd imagine it would be in the paperwork somewhere. Alusilber, KruJoe, oldcars and 4 others 7 Link to comment Share on other sites More sharing options...
vulgalour Posted October 2, 2017 Share Posted October 2, 2017 If you're not gonna do it, can you get me one of the under-light trims pls? Think it's passenger side I need. They unbolt. I could do with the bit of metal that matches along the bottom of the tailgate too, but that's too much work to ask you to do. Can't get the time free to get all the way up there to DIY, or I would. Link to comment Share on other sites More sharing options...
DodgyBastard Posted October 7, 2017 Author Share Posted October 7, 2017 If you're not gonna do it, can you get me one of the under-light trims pls? Think it's passenger side I need. They unbolt. I could do with the bit of metal that matches along the bottom of the tailgate too, but that's too much work to ask you to do. Can't get the time free to get all the way up there to DIY, or I would. If I'm not going to do it, I will try and get you all of the parts you require. Link to comment Share on other sites More sharing options...
DodgyBastard Posted October 7, 2017 Author Share Posted October 7, 2017 So, I bought another Proton... DSC_0842 by srblythe, on Flickr DSC_0845 by srblythe, on Flickr DSC_0847 by srblythe, on Flickr DSC_0869 by srblythe, on Flickr DSC_0870 by srblythe, on Flickr 53k miles on the clock, runs and drives reasonably well but think there's a broken spring up front, it clunks when steering lock to lock. Rover towed it back along the road fine. It cost £250 so was a bit salty for an old scabby proton with a short mot.There's no passenger side mirror and I was disappointed to see there's no shelf in the middle of the dash like my later proton but it's incredibly tidy and unworn inside.Underneath is solid but the wings and valance are scabby and there's some grot in the rear arches. Also spotted a Carina II for sale locally, I had visions of buying that but after buying the Proton this afternoon I convinced Mike/Nisfan that he needed a Carina in his life... DSC_0851 by srblythe, on Flickr DSC_0864 by srblythe, on Flickr DSC_0866 by srblythe, on Flickr Towing this with the Rover didn't feel so good, it felt like there was a bit of play somewhere and a delayed reaction when cornering but I managed to take it easy and get it back to base without killing any kittens or nuns.The Carina was bought for £100 as a non runner but after 5 minutes fettle it fired to life, I think Mike is going to change the oil tomorrow and put it into use as a WBOD. Lacquer Peel, phil_lihp, vulgalour and 16 others 19 Link to comment Share on other sites More sharing options...
Zelandeth Posted October 8, 2017 Share Posted October 8, 2017 That Proton looks like it will clean up lovely with a bit of work. Can't see the badge in the photos, but assuming it's a 1.3 as the 1.5 usually has a rev counter in GLS spec... Link to comment Share on other sites More sharing options...
Felly Magic Posted October 8, 2017 Share Posted October 8, 2017 That's the buttery biscuit base Proton with a dealer fit tilt slide sunroof, and no rear wiper or passenger mirror, how utterly miserable, well bought Scott Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now