Lacquer Peel Posted March 9, 2021 Share Posted March 9, 2021 I have one of those cheapy orange VAG code readers if you want it. Cord Fourteener 1 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 9, 2021 Author Share Posted March 9, 2021 34 minutes ago, bangernomics said: Do you have a code reader? If so are you allowing it to complete a readiness cycle? I have a cheapo code reader. Forgive my ignorance, what's a readiness cycle? Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 9, 2021 Author Share Posted March 9, 2021 23 minutes ago, Lacquer Peel said: I have one of those cheapy orange VAG code readers if you want it. I have a cheapo generic obd2 code reader. I'm going to go when I know the kids are asleep and see if there are any pending. Would a vagshite code reader be better? Link to comment Share on other sites More sharing options...
Lacquer Peel Posted March 9, 2021 Share Posted March 9, 2021 No they are usually compatible with any code reader. I also have a fuel filter for one of these if anyone wants it for £postage Cord Fourteener 1 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 9, 2021 Author Share Posted March 9, 2021 Just now, Lacquer Peel said: No they are usually compatible with any code reader. I also have a fuel filter for one of these if anyone wants it for £postage Yes please! This one needs a fuel filter, I did think, and still do, that it might be the filter at fault. Lacquer Peel 1 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 9, 2021 Author Share Posted March 9, 2021 54 minutes ago, bangernomics said: Do you have a code reader? If so are you allowing it to complete a readiness cycle? I've just scanned for codes and there's no codes. Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 9, 2021 Author Share Posted March 9, 2021 Ok actual progress other than me just complaining: Upon removing the plastic cover, and at the suggestion of @leanycanI looked at the intake hose where it goes into the intake gubbins. There is oil that's blown out of the little actuator by the vacuum pump, not sure if that's normal. But what's not right is that the intake hose st the join just before the vacuum pump is loose, and I mean rattling around in its connection. Any boost pressure will presumably be escaping here before creating manifold pressure, I assume? Could this be the culprit? GrumpiusMaximus 1 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 9, 2021 Author Share Posted March 9, 2021 And, how do I go about sealing it? At this point the hose and the joint are solid and the connection looks like it's held in with a wire circlip or some such arrangement. Link to comment Share on other sites More sharing options...
GeorgeB Posted March 9, 2021 Share Posted March 9, 2021 Gaffa tape to test if it's the problem? Cord Fourteener 1 Link to comment Share on other sites More sharing options...
rickvw72 Posted March 9, 2021 Share Posted March 9, 2021 Looks like the boost pipe is leaking a touch, but not enough to cause your issues. There as slow as a week on remand with the maf disconnected, it just runs a compromised, default setting rather than actual values. I’ve never had one with a dead maf that ever comes back to life again. Usually it’s permanent light on / limp mode. Think your issues are boost related. The turbos can carbon up and produce too much boost, as the vnt mechanism won’t move, which would be like having your wastegate closed all the time. I have seen remapped diesels exceed there boost pressure sensor max rating, if this was a 115 pd originally, I think they have only a 2 bar sensor. 130pd is 2.5 bar. The first bar is the engine off boost, so with a 2 bar sensor it’ll only take 1 bar boost. (I’ve had this on a golf which had an inter cooler swap for a used part, head scratcher working that one out). Cord Fourteener 1 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 10, 2021 Author Share Posted March 10, 2021 8 hours ago, rickvw72 said: Looks like the boost pipe is leaking a touch, but not enough to cause your issues. There as slow as a week on remand with the maf disconnected, it just runs a compromised, default setting rather than actual values. I’ve never had one with a dead maf that ever comes back to life again. Usually it’s permanent light on / limp mode. Think your issues are boost related. The turbos can carbon up and produce too much boost, as the vnt mechanism won’t move, which would be like having your wastegate closed all the time. I have seen remapped diesels exceed there boost pressure sensor max rating, if this was a 115 pd originally, I think they have only a 2 bar sensor. 130pd is 2.5 bar. The first bar is the engine off boost, so with a 2 bar sensor it’ll only take 1 bar boost. (I’ve had this on a golf which had an inter cooler swap for a used part, head scratcher working that one out). Thanks. First question, the fault seemed to come intermittently, is that related to over-boost? Second: if it was over-pressure how then can I reset it? Third, do I now have to take the turbo off and clean it all out? Because that's not the sort of thing I'm going to have time to do any time soon. How would I expect to pay a garage to do that? Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 10, 2021 Author Share Posted March 10, 2021 8 hours ago, rickvw72 said: Looks like the boost pipe is leaking a touch, but not enough to cause your issues. There as slow as a week on remand with the maf disconnected, it just runs a compromised, default setting rather than actual values. I’ve never had one with a dead maf that ever comes back to life again. Usually it’s permanent light on / limp mode. Think your issues are boost related. The turbos can carbon up and produce too much boost, as the vnt mechanism won’t move, which would be like having your wastegate closed all the time. I have seen remapped diesels exceed there boost pressure sensor max rating, if this was a 115 pd originally, I think they have only a 2 bar sensor. 130pd is 2.5 bar. The first bar is the engine off boost, so with a 2 bar sensor it’ll only take 1 bar boost. (I’ve had this on a golf which had an inter cooler swap for a used part, head scratcher working that one out). Also, relating to maf, there's no light, no code I can detect. Does this rule out maf, or is this still a possibility? Link to comment Share on other sites More sharing options...
Jazoli Posted March 10, 2021 Share Posted March 10, 2021 You can clean the turbo using mr muscle oven cleaner and its fairly easy on a passat, vid below, its not guaranteed to work but it might, you really need to get the car hooked up to VCDS and do some live logging, it could be the N75 valve or a simple vacuum leak. These (amazingly reliable!) PD engines can be an utter pain in the arse once they have been 'mapped' as they will start going into limp mode, usually when you are trying to do a rapid overtake, I could never get to the bottom of it on my Bora and I replaced everything chasing the issue, it went away when I put the standard 130 map back on the car. Cord Fourteener and Lacquer Peel 2 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 10, 2021 Author Share Posted March 10, 2021 VW Passat for sale, remapped, PIA. Anyone? Lacquer Peel 1 Link to comment Share on other sites More sharing options...
Dick Longbridge Posted March 10, 2021 Share Posted March 10, 2021 Tim, what has the PO got to say about the situation? You've only had the car five minutes. Cord Fourteener 1 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 10, 2021 Author Share Posted March 10, 2021 13 minutes ago, Dick Longbridge said: Tim, what has the PO got to say about the situation? You've only had the car five minutes. The POs are a long list of fine Shitters, the latest of which did tell me on the way over that he had noticed a hesitation or something, but I was like whatever it'll be fine. Dick Longbridge 1 Link to comment Share on other sites More sharing options...
Dick Longbridge Posted March 10, 2021 Share Posted March 10, 2021 7 minutes ago, Tim_E said: The POs are a long list of fine Shitters, the latest of which did tell me on the way over that he had noticed a hesitation or something, but I was like whatever it'll be fine. Fair enough. I knew the car had been through a few members on here; regardless of that I think I'd still be having a chat with the seller if the car was going into limp mode days after taking ownership of it. Unless it's complete coincidence of course. 😉 Cord Fourteener 1 Link to comment Share on other sites More sharing options...
rusty998 Posted March 10, 2021 Share Posted March 10, 2021 I've got this EGR valve that came off my old Skoda Fabia 1.9 100bhp, I know that it was fully working before the car was written off, your welcome to it for nothing if you can cover the postage costlet me know if you would like it? davehedgehog31 and Cord Fourteener 2 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 10, 2021 Author Share Posted March 10, 2021 3 minutes ago, Dick Longbridge said: Fair enough. I knew the car had been through a few members on here; regardless of that I think I'd still be having a chat with the seller if the car was going into limp mode days after taking ownership of it. Unless it's complete coincidence of course. 😉 He says it wasn't, I have no reason to doubt him. Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 10, 2021 Author Share Posted March 10, 2021 Just now, rusty998 said: I've got this EGR valve that came off my old Skoda Fabia 1.9 100bhp, I know that it was fully working before the car was written off, your welcome to it for nothing if you can cover the postage costlet me know if you would like it? Ok, I'm at work just now but I'll have look later. Thanks👍 rusty998 1 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 10, 2021 Author Share Posted March 10, 2021 Update, Passat is booked in for diagnostics Monday. loserone, Lacquer Peel and BeEP 3 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 10, 2021 Author Share Posted March 10, 2021 I think I may have thrown the toys out of the pram somewhat, but you know, it's good to moan here and not to the family. BeEP, Floatylight, N19 and 3 others 6 Link to comment Share on other sites More sharing options...
Tepper Posted March 10, 2021 Share Posted March 10, 2021 Diagnostics are a good move, there are probably codes there but sometimes cheap/generic readers don't show them. Hopefully it's nothing too difficult to sort. I have code readers that will work for this if you're ever anywhere near Reading. Cord Fourteener 1 Link to comment Share on other sites More sharing options...
Cookiesouwest Posted March 10, 2021 Share Posted March 10, 2021 On 3/9/2021 at 7:58 AM, Tim_E said: Warning: Poor old me coming up. People here and everywhere say things like 'it'll just take ... minutes/ hours to do that, it's quite easy. My experience: takes days if not weeks, first being scared of failure and getting my car stranded then looking up ten million you tube videos on how to, then figuring out that I'm missing an important tool, then starting and not being able to get the first bolt undone and giving up, leaving my car stranded for a while, maybe get half way through making it drive again before the kids/ wife/ life means I have to put tools down as I've already taken the half a day I had free, then it rains for a week, then i try again and get a bit more of the way though, repeat... and that's a simple half hour job... Everyone else in the world: half an hour, maybe mild cursing, car works. Ok self pitying over with, as you were 🤣 Edit: the garages exist for a reason, there's no man-shame deciding to farm it out if I actually can't do a job in the time frame I have. Best description on me, ever written Cord Fourteener and Twiggy 2 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 10, 2021 Author Share Posted March 10, 2021 This will encourage me to get a tow bar on the Volvo for these situations... I would have had to get the correct tow bar on the old Mondeo so I don't feel too hard done to, such is life and bangernomics and all that. For now the Passat goes with about as umph as Volvo, which is some. Not a lot but some at least. It's decent otherwise, if it doesn't mean throwing lots of money at it then I'll keep I guess. Considering I've had this or similar issue with diesels and even turbo petrol cars before I do feel like I should have foreseen this. Or am I just unlucky? Anyway, fingers crossed for Monday and the diagnostic test. Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 10, 2021 Author Share Posted March 10, 2021 1 minute ago, Cookiesouwest said: Best description on me, ever written Haha I'm not the only one then! I had all these noble intentions of learning but it just stresses me out and I get nowhere. I can usually manage the oil, water and filters and the occasional other thing with only mild swearing. Link to comment Share on other sites More sharing options...
Floatylight Posted March 10, 2021 Share Posted March 10, 2021 3 hours ago, Dick Longbridge said: Fair enough. I knew the car had been through a few members on here; regardless of that I think I'd still be having a chat with the seller if the car was going into limp mode days after taking ownership of it. Unless it's complete coincidence of course. 😉 Was a year ago but no limp mode in my ownership.. Cord Fourteener and Dick Longbridge 2 Link to comment Share on other sites More sharing options...
Cavcraft Posted March 10, 2021 Share Posted March 10, 2021 If it's that wanky N75 valve thing, it's not an expensive fix. When when mine started going haywire, it initially would re-boot itself once the ignition was turned on/off, the times between it being turned off and back on again gradually got longer until that didn't make any odds. Cord Fourteener 1 Link to comment Share on other sites More sharing options...
Datsuncog Posted March 10, 2021 Share Posted March 10, 2021 1 hour ago, Tim_E said: Haha I'm not the only one then! I had all these noble intentions of learning but it just stresses me out and I get nowhere. I can usually manage the oil, water and filters and the occasional other thing with only mild swearing. You're definitely not the only one - pretty much identical to my level of skill/enthusiasm/inclination with cars... There are some phenomenal auto-wizards on here, but I am not one of them. Hope it's a relatively straightforward fix on this one! Cord Fourteener 1 Link to comment Share on other sites More sharing options...
JMotor Posted March 10, 2021 Share Posted March 10, 2021 *Holds hand up too* I will do most jobs I can on my cars. But there isn't any shame in getting someone else to do it. That was proven to me with the Daewoo. Asked my local garage to put a water pump and timing belt on, as I didn't have time. Turned out the water pump needed chiseled out as it hadn't been changed in years if at all. I needed the car and the garage turned it around in a couple of days. It was ready for when I needed it. Oh and your rant. Aye, I'd of said the exactly the same things lol. So it's fine, if it helps you feel better. Cord Fourteener 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now