Pete-M Posted October 15, 2012 Share Posted October 15, 2012 Jag X300 clock? Mine's fooked. Also, Jag X300 stereo as I can't be bothered resoldering the cd player control circuit again. It's the Alpine one. Also, o/s rear seatbelt buckle surround, the plastic bit in the backrest. In oatmeal (light beige..) if possible. The entire glovebox setup from a late X300 would be nice, must be from an X300 or X305 though - not the X308. Basically, the dash looks like a late spec XJ40 one, not the curvier X308 (V8 XJ) job. Mine's a late '94, so doesn't actually have a glovebox... Ta. Link to comment Share on other sites More sharing options...
Guest Posted October 18, 2012 Share Posted October 18, 2012 A Mk1 Volvo 460 part leather interior with door cards and a centre console box that goes behind the handbrake, please. I'm more or less convinced that there aren't any Mk1 part leather interiors left, but I realise you dashing folk poke through more scrapyards than the average Ferrari cap wearing true driving enthusiast, so if any appear, do please shout up. A pair of phase 2 Peugeot 305 wings, a front valance and some inner \ outer sills would also be sexeh, but not at the sort of money that lunatic in Yorkshire charges. Some front discs for the Amazon would also be nice, because they're mental money. My car has 3 pot front calipers. Link to comment Share on other sites More sharing options...
R9UKE Posted October 22, 2012 Share Posted October 22, 2012 Boot mounted CD Changer from a Mark 3 Espace and linking lead between it and the amp under the seat. It's the only unit that can replace the Avantime's crappy unit while maintaining dash display and functions from the remote. Link to comment Share on other sites More sharing options...
Electric Leyland Posted October 23, 2012 Share Posted October 23, 2012 The search continues for: 1. Front and rear bumbers for 1967-76 Audi 100 (that arent bent and totally covered in rust, got those already) 2. Original early white Bedford Chevanne (not modified, and preferably roadworthy or near roadworthy). 3. Some needles in some haystacks. Link to comment Share on other sites More sharing options...
uk_senator Posted October 27, 2012 Share Posted October 27, 2012 Austin Princess (wedge)Driver's side front indicator/sidelight lens. Only been able to find passenger for £30 plus P&P! I`ve got a Princess lens, but not sure which side it is (sods law the wrong side).. Not entirely sure where I put it last either, but if I find it, I`ll remember to check.. Link to comment Share on other sites More sharing options...
M'coli Posted October 31, 2012 Share Posted October 31, 2012 RENAULT 12 (Oh yes!) REAR BUMPER PLEASE CHAPS....xIf that R12 in your avatar is yolurs, we need more information on it - perhaps put up a thread about it? I've driven a couple of 12s and like them. Link to comment Share on other sites More sharing options...
trigger Posted November 1, 2012 Share Posted November 1, 2012 Yep let's see more of it, You must be very local to me too? Link to comment Share on other sites More sharing options...
garycox Posted November 3, 2012 Share Posted November 3, 2012 I need a nearside front wing for a Maestro... Must be for a metal bumpered one, and preferably without a side repeater hole. Thanks! Link to comment Share on other sites More sharing options...
garycox Posted November 5, 2012 Share Posted November 5, 2012 Anyone got a non locking fuel cap that'll fit a Maestro? I have lost mine cos I'm an idiot. Link to comment Share on other sites More sharing options...
trigger Posted November 7, 2012 Share Posted November 7, 2012 Oh yes!, You must start a thread with more photos on this!, You rarely see these around these parts, this is the only one I've seen locally and that was only once last year at Aldeburgh. 1973 Renault 12 1300 TS by Trigger's Retro Road Tests!, on Flickr Link to comment Share on other sites More sharing options...
ruffgeezer Posted November 7, 2012 Share Posted November 7, 2012 I need a bonnet for my C15, so far I've only found ones that (a) Don't exist ( are fucked or © are cunting miles away. If anyone spots one in the wild, (white preferably) can they give me the price and location asap! I'm Lincolnshire based, but also have a mate based in Warrington who can grab/store tat for me. Help me Autoshite, you're my only hope! Link to comment Share on other sites More sharing options...
Stixy Posted November 9, 2012 Share Posted November 9, 2012 Im looking for the plastic air filter casing from a carburettored dohc Sierra or granada anybody help ? Link to comment Share on other sites More sharing options...
KruJoe Posted November 9, 2012 Share Posted November 9, 2012 I'm Lincolnshire based, but also have a mate based in Warrington who can grab/store tat for me. You have mates all over the country who can grab/store tat for you! (See AS shiply thread.)Sorry, can't help with finding a bonnet though. Link to comment Share on other sites More sharing options...
Albert Ross Posted November 11, 2012 Share Posted November 11, 2012 Im looking for the plastic air filter casing from a carburettored dohc Sierra or granada anybody help ? Unless you ARE Rob at Sierrashack, have you tried him? Selby area... Link to comment Share on other sites More sharing options...
Stixy Posted November 11, 2012 Share Posted November 11, 2012 Im looking for the plastic air filter casing from a carburettored dohc Sierra or granada anybody help ? Unless you ARE Rob at Sierrashack, have you tried him? Selby area... No im not Rob I havent tried him recently but will give him a call thx Link to comment Share on other sites More sharing options...
oman5 Posted November 12, 2012 Share Posted November 12, 2012 Wanted: Rover P6 four pot engine. 2000 or 2200 Link to comment Share on other sites More sharing options...
whitevanman Posted November 12, 2012 Share Posted November 12, 2012 I'm after a post 86 Sierra steering wheel without too much wear on it.... Link to comment Share on other sites More sharing options...
Rebuilda Posted November 12, 2012 Share Posted November 12, 2012 Sad though this may be considered by some, I am looking for any type of Dutton Sierra back end to make into a trailer, I looked at that one in cyprus or malta and it seems a bit of a long haul for an inside out bathtub with holes. Close to NW england (bolton/manc would be much better) Any condition considered.... no really, ANY condition as I mainly want the side panels. Link to comment Share on other sites More sharing options...
Tonka Posted November 16, 2012 Share Posted November 16, 2012 You shouldn't have to wait too long, there's a Classic Ford breaker in the NW always chopping up Jagos, Rickmans, Duttons etc......... And before anybody says anything he doesn't get a Queen's award for doing it Link to comment Share on other sites More sharing options...
Rebuilda Posted November 16, 2012 Share Posted November 16, 2012 Yeah.. I know the one.My current project was one of his victims. My Dutton Sierra II by Adrian Southgate, on Flickr That's what I want to slap the trailer onto. Link to comment Share on other sites More sharing options...
Mr_Bo11ox Posted November 17, 2012 Share Posted November 17, 2012 I'm looking for a towbar for a Mk2 mondeo hatch, local scrapyard has one but they want £50 which sees a bit steep to me. Link to comment Share on other sites More sharing options...
keef Posted November 17, 2012 Share Posted November 17, 2012 I'm looking for a towbar for a Mk2 mondeo hatch, local scrapyard has one but they want £50 which sees a bit steep to me. I have one for a Maestro and one for a Volvo 340, if either is any good? Say £20 each? Link to comment Share on other sites More sharing options...
cms206 Posted November 17, 2012 Share Posted November 17, 2012 Anyone by any chance got an OSR tail light for a Volvo 740 estate lying about? eBay's prices are wildly variable and it's 90% full of fucktards. Link to comment Share on other sites More sharing options...
Bobthebeard Posted November 25, 2012 Share Posted November 25, 2012 Any one want some Porsche 944 wheels? Four Teledials that badly need re painting. They were on my car when purchased but I have now fitted some Boxter alloys and tyres so the old wheels are available free to a good* home. They are cosmetically scruffy but hold air ok etc. Dont want to put them on EBay really due to the undoubted mongness and mental suffering that will doubtless ensue! From a 1988 944. Would rather they were put to good use for free by a fellow 'Shiteist TBH than suffer the EBay pain! Link to comment Share on other sites More sharing options...
tagoraman83 Posted November 25, 2012 Share Posted November 25, 2012 I'm a bit slow off the mark here only just spotted this thread. Wanted any Tagora parts, can collect and pay in real cash! The bay is throwing up the odd part but nothing of any substance. Oh and there would be a small reward for anyone pointing me in the direction of a successful scrapyard find! Link to comment Share on other sites More sharing options...
Lord Sterling Posted November 27, 2012 Author Share Posted November 27, 2012 Anyone got a set of HT leads for a Mk2 Ford Granada 2.8? Chap at my work has an 84' A-reg 2.8 Granada (So my car isnt the oldest in the works carpark) and needs some HT leads. Link to comment Share on other sites More sharing options...
whitevanman Posted November 30, 2012 Share Posted November 30, 2012 Could do with a couple of rims, steel or alloy for a Volvo 440/460/480, anyone got anything available? Link to comment Share on other sites More sharing options...
Cavcraft Posted November 30, 2012 Share Posted November 30, 2012 Long shot but if anyone has (or knows of) a large framed BSA Tour De France cycle knocking about and want to sell it for a reasonable price let me know please. Link to comment Share on other sites More sharing options...
DodgyBastard Posted December 2, 2012 Share Posted December 2, 2012 VW Vento bonnet needed! Link to comment Share on other sites More sharing options...
keef Posted December 2, 2012 Share Posted December 2, 2012 Would appreciate a heads-up if anyone comes across a front cross member for a landcrab. Mine's been attacked by the old tin-worm. Link to comment Share on other sites More sharing options...
Recommended Posts