Jump to content

Autoshites *official* WANTED/OFFERED thread...


Recommended Posts

Posted

i may be able to assist on the floor mats.my friend who deals in reliant spares also has a thing for old mercs,and has broekn a few of these recently,indeed im pretty sure i saw a set of grey mats in the merc spares pile.

Brill man, I've a thing about correct mats in cars. Let me know what the deal is, I haz cash waiting!

Posted

I've taken the Thule roofbars off of that watery Previa I'm outing.

Anybody fancy them for £40?

In case you didn't see them before, here's how they looked on the Previa.

Are they universal?

 

RedPrevia003_zpsc177a59d.jpg

Posted

the set listed for a prvia is

 

the bars and feet(750/754) will fit a lot of stuff

the short roof adapter is used for most 3 door cars

kit (1080) is usually vehicle specific

 

  • Thule Rapid System 750/754
  • Thule Square Bar 762
  • Kit 1080
  • Thule Short Roof Adapter 774
Posted

I'm looking for a good type 9 5 speed gearbox from a Sierra to put in my Cortina if anybody has one. Thanks

Posted

the set listed for a prvia is

 

the bars and feet(750/754) will fit a lot of stuff

the short roof adapter is used for most 3 door cars

kit (1080) is usually vehicle specific

Thanks for that chap.

Posted

I'm looking for a good type 9 5 speed gearbox from a Sierra to put in my Cortina if anybody has one. Thanks

 

try pm'ing stixy i know hes broke a few in the past 

Posted

Unused Alexander Alfa steering wheel cover, probably quite old.

 

DSC_0894_zps831f83f6.jpg

DSC_0895_zps16ff7b3c.jpg

DSC_0896_zpsc30cb3d9.jpg

 

Put £7.50 in my Paypal and I'll have it put in the back of a red van that will bring it right to your door.

Posted

Wanting a (reasonably complete and prefer running  )  7 litre Chevrolet engine 454 ,  long shot i know, but south east / home counties would be good . Not thousands of pounds either... i'm poor ..

Posted

pair of sills for mk3/4/5 Cortina price please inc P&P unless close enough to pick up.

Posted

pair of series landrover rear spring hangers/corners £30, chevette 2dr sill with extension (n/s) £20. plus P&P

Posted

pair of sills for mk3/4/5 Cortina price please inc P&P unless close enough to pick up.

Try J Collier Classic car sills.........he makes to order. 01234 840958

 

He made a pair for my last P2 roverwhich are pretty complex (for sills anyway). Came to car and measured up,then made some and asked for £25. In the end we did a swap where I gave him an oak tree stump......

Posted

Try J Collier Classic car sills.........he makes to order. 01234 840958

 

He made a pair for my last P2 roverwhich are pretty complex (for sills anyway). Came to car and measured up,then made some and asked for £25. In the end we did a swap where I gave him an oak tree stump......

Good knowledge!

Posted

skoda Estelle plastic huh cap black plastic approx. 6 inch dia. £5

sorry can't do pics.

Posted

Not so much an offered as a shiteley opportunity,

 

From next Friday until god knows when I'll be driving an empty Luton van from Ludlow up to North Staffs/Derbyshire to pick up a load for Nuneaton then driving the empty van back to Ludlow each Friday.  I'm self employed so can take 'breaks' if required.

 

I also have a run in a car down to Worthing on December 2nd but can't carry much or deviate from the route as the customer is coming with me,  will need to stop at services though if anyone is prepared to hang round and wait for packages.

Posted

That run doesn't sound too cost effective for whoever's paying for it.  You must be loaded for only about a quarter of the distance you're travelling!

Posted

Anyone have a Raleigh Wisp moped cheap ?

 

 

If you mean Puch Maxi instead of Raleigh Wisp, then yes I have.

Posted

 

If you mean Puch Maxi instead of Raleigh Wisp, then yes I have.

 You know..A wealthy family ,opposite my parents in law , were moving, downsizing . Asked my father in law to take some stuff to the tip.. And we're talking priceless treasure junk here !! There's a dusty Puch Maxi bought years ago for the son...it's done 15 miles !It's like new !! So I had it.. WTF do i want a moped for? I dunno, but i had it, I couldn't say no !! I gave it to a lad to bomb round the field in the summer holidays a few weeks later .. Made his day . I wasn't allowed a motorbike as a kid, and when i did get one (a 325 Sherpa T ) i fell off it, and gave that away too ! Nope, Project ! Must be a Raleigh Wisp , but the seem to go for daft money. Raleigh Chopper seat would be good too ! The rest i can fabricate.

post-17940-0-25845500-1414864442_thumb.jpg

Posted

Hi all,

 

I Seem to have won a collection of posters on ebay which are collection only from Pontefract! Just wondered if anyone local would be able to collect and either stick them in the post or hold onto them untill I'm next up that way?

 

Happy to make a contribution to your beer fund in return.

 

Cheers

 

Joe

Posted

I can get them if you want Thursday or Friday next week. To make it easier they can drop them off at Pontefract register office (it's in the town hall) on Thursday as my wife's working there that day.

  • Like 1
Posted

I would like puch maxi,a purple 74 model was my first bike :-) wisps I've had a few,all shit.

Posted

I'm looking for a set of these six spoke alloys that were optional on Suzuki Swifts and Subaru Justy's. None available on Ebay at the moment so if you see anything give me a shout.

 

$_57.JPG

Posted

post-17318-0-37134700-1414960167_thumb.jpg

 

I'm fed up fixing this ugly old beast, so it's now for sale... Proper* ad and more pics can be found here, shitters discount applies.

Posted

I am clearing out the various bits and pieces I have accumulated that I don't honestly think I'll need now. This will be added to over the next few days, some of it for the price of postage, some of it not.

 

Firstly, these Alfa Romeo alloys, from an Alfasud I think, but I've also seen then on Spyders. They are 13" and 4x98 PCD so will fit a variety of Fiats, Lancias, Alfa Romeos, Ladas and possibly FSOs and Yugos. One has a small dink in the rim, but the other 4 all look to be in very good condition: £50 please.

 

gEqLPj8.jpg

 

The second set of wheels is from a Rover SD1, two of them have tyres which are Arrowspeed or Forceums or something, anyway they have loads of tread but are still fairly hopeless if pressing on. The actual alloys are all in good condition. £25

8Qj6DK8.jpg

 

Next up is the first of a load of radios. This is an Alpine and the only one I want any cash for. It works well but only does CDs and comes with the plug in the back. £5 + postage which I think will be about £4.20

 

XLbQSmJ.jpg

 

Now this JVC which came from somewhere or other. I'm not sure if it works but free if you pay postage of £4.80 or whatever.

t57Eobj.jpg

 

This Blaupunkt Granada SQR49 came from an E30 BMW 3-series and comes with the correct cage to fit one. It works, although the LCD is damaged and doesn't work, there is no door on the cassette deck and the handle to pull it out the car is missing. Free if postage paid:

 

j5jXmxa.jpg

 

Finally this Grundig WKC 3039 which is of unknown condition and has a knob missing. Came from a scrap Lancia Y10. Pay postage please.

cRkJ2mv.jpg

Posted

Try J Collier Classic car sills.........he makes to order. 01234 840958

 

He made a pair for my last P2 roverwhich are pretty complex (for sills anyway). Came to car and measured up,then made some and asked for £25. In the end we did a swap where I gave him an oak tree stump......

he is cheap but you get what you pay for they will need some fettling with 

Posted

wheels to fit a morris marina,minor,dolomite or mg midget 3.75 fitment pm me please

Posted

If you mean Puch Maxi instead of Raleigh Wisp, then yes I have.

 

 

Are Puch Maxis any good then? I fancy a ped for the work commute. OBV because winters coming.

Guest
This topic is now closed to further replies.
×
×
  • Create New...