Autoshite's official for sale/wanted thread

[Lankytim]

They’re 195/50R15

[Hertz]

I have a pair of Falken 195 65 15 tyres in excellent condition with 7mm of tread. £30 to shitters.

 

Collection from J17 M6, I do travel a bit with work so if you are on my way anywhere I can drop off/meet. Or I could post at your cost (probably be around £10).

 

SOLD

[mrbenn]

Maxiscan MS309 OBD scanner.

 

Now sold.

Edited August 5, 2018 by mrbenn

[egg]

I've got three Zetec 'silvertop' cambelt kits in stock, seems excessive. £13 posted for this Mapco one.

 

 

[Tigerfox]

Has anybody got a video inspection camera  that is no longer used ?  

 

I need to look inside bike crankcase that wont come apart

[Wingz123]

WANTED -

 

Pair of car ramps - preferably anywhere near Reading/North London/Birmingham - delivered a car to Cornwall ages ago and left my old pair in the boot!

 

Also wanted....

 

Spacers for 5x112 VAG fitment.... what have you got?

 

Thank you

[Kiltox]

Someone PLEASE come and take this oil drainer and headlight beam tester off my hands - moving unit soon and it needs to be in someone else’s!!

 

Can throw in a quantity of scrap car batteries if you’re a pikey type that will weigh them in

[bangernomics]

Ooh garage things, where are you located kiltox?

[Kiltox]

The gear is at a storage facility in Cheltenham.

 

Oil drainer (big workshop one for use under a ramp) and ex MoT beam tester is free of charge - other stuff available if you can dig it out at negotiable prices.

 

Oil drainer has a couple of litres of oil in and I have no means of getting it out (you need to hook up a compressor to drain it) - so it needs to be transported upright.

[bangernomics]

Bit far down for me unfortunately but would’ve been perfect. Good luck in the new unit.

[Kiltox]

Cheers

 

New unit is very not car related sadly.

[Squire_Dawson]

Switch panel surplus to requirements, circa. mid 1960's so would suit chod from that era. This has Lucar terminals as opposed to the earlier screw terminals. Constructed from 18 s.w.g. steel, these were the best panels available, made by D.H. Bonnella & Son who supplied aircraft manufacturers. This is the 'Mini' K.D. type, enables switching of 2 accessories plus socket for parking light &c.

 

 

Size 3³/₄ x 1¹/₄^"

 

£8 posted.

[gm]

Honda aux in adaptor £5 posted

 

 

Works with this model of radio as fitted to crv, civic, s2000

 

 

But after extensive research

 

 

I found it doesn't work with this model of radio

 

[Bucketeer]

WANTED -

 

Pair of car ramps - preferably anywhere near Reading/North London/Birmingham - delivered a car to Cornwall ages ago and left my old pair in the boot!

 

Also wanted....

 

Spacers for 5x112 VAG fitment.... what have you got?

 

Thank you

Hey Wingz, I've got these cluttering up my garden.

 

 

They're relatively narrow with the raised lip but I'm sure that's nothing that can't be negated with a couple of bits of wood if need be.

I got them off RobT for a nominal fee and I've had my use out of them. I'm in Camberley but can take them closer to Reading.

 

Also, I don't have 5x112 spacers but I do have 5x112 steel wheels with unused Semperit Speedgrip2 winter tyres. They are cluttering up my garden too. Available to you (or anyone) for a very reasonable price.

 

 

[bigfella2]

I have some spacers that came with a set of wheels I bought, not sure if there any good. They are wide though. Do you want me to dig em out of garage.

Just measured them one pair is 40mm and the other pair is 65mm!!!!!!

[AlabamaShrimp]

I'm after some stringer andess bouncy rubber exhaust mounts for the 05 Fiesta ST.

 

Anyone know a good ace to get some from as I seem to find all kinds of shapes and prices, there's no consistency.

[chancer]

Anyone got a cheap haynes manual for a Mk1 ford ka? Cheers

[Christine]

Cheap Haynes manual  for an Audi A3  needing work..... fiver posted 

 

There's also BMW 1 Series Haynes for £2 in the charity shop i can get it if anyone wants it  ? fiver posted too

 

 

[adw1977]

Posh landcrab brochure from 1973 in very good condition - 12 pages A4 size - £6 posted

 

[Wingz123]

I have some spacers that came with a set of wheels I bought, not sure if there any good. They are wide though. Do you want me to dig em out of garage.

Just measured them one pair is 40mm and the other pair is 65mm!!!!!!

Thank you for your response bigfella - do you have the bolts that go with them? Reason being I am looking for spacers is this - I have just fitted larger brakes from an Audi TT to my Audi A6 and well.....have a look at the pictures....tight aint the word....the car is just about drivable but I hear a very slight chinking and suspect there is the very slightest of rubbing even though I can’t see any evidence of the rubbing.

 

Have included a ‘standard’ brake size picture to kind of show a before and after!

[Wingz123]

Bucketeer - I have also messaged you too! Thank you

[rainagain]

Almost brand new Peugeot 307 front discs vented 265mm

 

I bought these from Gumtree for my Diesel 307, which turns out to have larger discs so grab yourself a bargain for just £10 for two discs. The previous owner had just fitted to them to his 307 before he scrapped it, the discs have been covered in copper grease to protect them. I've included the pads that came with the discs, although I'm not sure if they are correct. Either way £5 a disc is pretty cheap!

 

The discs are located in Fife for pickup or I can post via myhermes, etc at cost

[rainagain]

Dayco Timing Belt Kit KTB-174 Fits Renault Clio 1.2/Twingo/Kangoo

 

Brand new still in sealed box £20 posted

[drum]

Hey Wingz, I've got these cluttering up my garden.

IMG_20180806_171419446.jpg

They're relatively narrow with the raised lip but I'm sure that's nothing that can't be negated with a couple of bits of wood if need be.

I got them off RobT for a nominal fee and I've had my use out of them. I'm in Camberley but can take them closer to Reading.

Also, I don't have 5x112 spacers but I do have 5x112 steel wheels with unused Semperit Speedgrip2 winter tyres. They are cluttering up my garden too. Available to you (or anyone) for a very reasonable price.

IMG_20180724_131316397.jpg

IMG_20180724_131453873.jpg

 

I would be interested in those wheels if there was anyway of getting them northwards.

[Bucketeer]

^^^^ I'm heading to Dundee very soon.

[New POD]

WANTED -

 

Pair of car ramps - preferably anywhere near Reading/North London/Birmingham - delivered a car to Cornwall ages ago and left my old pair in the boot!

 

Also wanted....

 

Spacers for 5x112 VAG fitment.... what have you got?

 

Thank you

I have a spare set in the garage.

[New POD]

WANTED -

 

Pair of car ramps - preferably anywhere near Reading/North London/Birmingham - delivered a car to Cornwall ages ago and left my old pair in the boot!

 

Also wanted....

 

Spacers for 5x112 VAG fitment.... what have you got?

 

Thank you

I have a spare set in the garage.

[stephen01]

Honda aux in adaptor £5 posted

 

IMG_1639.JPG

 

Works with this model of radio as fitted to crv, civic, s2000

 

IMG_1640.JPG

 

But after extensive research

 

IMG_3654.JPG

 

I found it doesn't work with this model of radio

 

IMG_3710.JPG

 

I'll take this off your hands.. 

 

drop me a PM for payment details 

 

thanks 

[Tamworthbay]

Anyone want a quick release steering wheel adaptor? It’s the weld on type and ideal for motorsport (or anti theft which is why I got it) it has never been used and was bought from a decent place (Demon tweeks I think) not a dodgy eBay one. It’s small and compact compared to the bolt on type. £20 delivered to your door.

 

Mocal oil cooler used but seems good and held pressure when I used it, £15 collected.

 

Mini spi/ mpi fuel tank with sender unit in great condition with cap and key £70 collected

 

Pm me if you are interested.

 

I also have a couple of Capri wing offcuts that could be of use to someone perhaps, free for collection.

[greengartside]

I’m looking for an air conditioning pipe that fits a 2009 Ford Fiesta 1.4 TDCI. This one, in fact.

 

 

The problem I face is twofold. Firstly there are absolutely no markings at all anywhere on it, they would have a green sticker with a part number on it usually but this one doesn’t so it makes a search for one a million times harder.

 

Secondly, I’ve been to all the breakers yards in my area, and spent a few hours today in the pissing down rain looking for one of these buggers. All the ones I’ve seen on eBay aren’t correct and any others I’ve found that turned out to be the exact match ones are sold. So my piss-boil level is now x1000000000.

 

If anyone has one of these unobtainium pipes I would be most grateful.