Jump to content

Recommended Posts

Posted

Or he's thinking that's where I usually park 😁

  • Like 3
Posted

If that's a SMART in front of the VDP it doesn't look quite as small as it purports to be - different angle next time in the office please!

On a slight tangent, what's the gearbox like in this? I'm assuming it's one of those AP auto things with four speeds and all the numbers in the wrong order on the selector? Is it smooth, slurry, jerky, does it react & kick down promptly etc - ta

  • HMC changed the title to HMC - ADO16 SLAMMED (unintentional)
Posted

Quick, post it on the blue forum, you'll be an instant hero!

  • Haha 3
Posted
2 minutes ago, HMC said:

UMMM

Unintended slammage has happened !

That looks like both sides though, how come?

Posted
3 minutes ago, High Jetter said:

That looks like both sides though, how come?

its just the side nearest the camera. I drove it to work and by lunchtime one side had sagged down 

  • Like 1
Posted
11 minutes ago, HMC said:

Unintended slammage has happened !

Oh, FFS !

I recall the front-rear hydrolastic pipes had been replaced on one side but not the other - IIRC the nearside were new, so it may be time for the offside line to be renewed. I don't recall the hydrolastic unit flexible pipes looking too bad, so it should hopefully not need that.

Or, maybe it's just the Schrader valve (buy a lottery ticket if it is !).

Posted

I am away from home for a bit, but I do have a pump and fluid if you are stuck when I get home.

Posted
1 hour ago, HMC said:

UMMM

IMG_4253.thumb.jpeg.c507681792ffbf2a2c5843f12c8260ba.jpeg

Unintended slammage has happened !

Looks sweet. I’d add a little rake myself but other than that, nice. 😄😎

Posted

Deploy the Hydragas Terminator T-1000. It absolutely will not stop until your suspension has been pumped back up. 

 

Incubus straw staff hydragas suspension pump Flavor shortness of breath  Fraud

 

Posted

i cant see any obvious leaks, ive got a little hand help pump i got off e bay years ago, maybe i should just get pumping to the correct height and see what happens? (iirc you can use antifreeze/distilled water for fluid)

#hydrolasticclueless

Posted
1 minute ago, HMC said:

i cant see any obvious leaks, ive got a little hand help pump i got off e bay years ago, maybe i should just get pumping to the correct height and see what happens? (iirc you can use antifreeze/distilled water for fluid)

#hydrolasticclueless

50/50 antifreeze water mix works fine, yes.

Might be worth picking up a spare Schrader valve innards before you begin, too - easily liberated from a spare wheel with a valve key.

Just pump it up and see where it squirts out!

  • Like 2
Posted
32 minutes ago, HMC said:

i cant see any obvious leaks, ive got a little hand help pump i got off e bay years ago, maybe i should just get pumping to the correct height and see what happens? (iirc you can use antifreeze/distilled water for fluid)

#hydrolasticclueless

There must be a new leak somewhere... ride height had not changed in the five months (and over a thousand miles) since I pumped it up to the recommended pressure.

Is your pump the grease gun based type ? They work, but their output is pretty small so it would take an awfully long time for you to correct such a massive drop.

If nobody local has access to a Dalek, you are welcome to pop into Fraud Garages and use my Heath Robinson inspired version. But driving 150 miles on the bump stops may not be a great idea...

Regarding hydrolastic fluid, a 50% v/v mix of ethylene glycol antifreeze and distilled water is a good enough substitute for the proper fluid (which IIRC is alcohol based).

  • Like 2
Posted

I don't fancy the drive home after you have sold it to me ;)

So get pumping :)

 

Posted
5 minutes ago, Cookiesouwest said:

I don't fancy the drive home after you have sold it to me ;)

So get pumping :)

 

Autoshite taxi available. Quite fancy a trip back to Tavi.

Posted
1 hour ago, Cookiesouwest said:

I don't fancy the drive home after you have sold it to me ;)

[Enabler] Well, BMC did use to say the cars were perfectly safe to drive at 30MPH with the suspension deflated... [/Enabler]

  • Haha 2
Posted
8 minutes ago, Sigmund Fraud said:

[Enabler] Well, BMC did use to say the cars were perfectly safe to drive at 30MPH with the suspension deflated... [/Enabler]

Also can be safely driven even in the event of catastrophic and sudden leakage of the fluid when going around a corner. 

IMG_20200527_130624~2.jpg

  • Like 1
Posted
3 hours ago, Sigmund Fraud said:

[Enabler] Well, BMC did use to say the cars were perfectly safe to drive at 30MPH with the suspension deflated... [/Enabler]

It's not comfy tho. Dalek required.

  • Like 1
Posted

Meanwhile, in a deal with @Tubbo , he has the beetle, and i have some money and a 1996 fiesta 1.25 Ghia CTX auto 5 door (take a breath)

Its a bit of a survivor, 31k on the clock, owned by an elderly childrens author for many years (it came with a signed book of hers)

IMG_4276.thumb.png.06f1e9a1a100e9a20b86b6bc6a68fab4.png

 

“I’ll take it, in white!” Said Bev excitedly as she thumbed the dealer’s brochure.

 

Comes also with the usual books, and the lovely 1.25 engine. It also has the curious cvt box,  which is fun to punt it along with. Im trying to decide how well matched this combo is.

Full credit to @tubbo for giving it the tlc (alloys, cambelt, servicing, cosmetics amongst a host of other stuff)

So in the VDP1300 (auto)  and fiesta ghia (auto) i have upmarket wood* clad giffer transport of the 70s and 90s fully covered.

 

IMG_4266.thumb.jpeg.f752526cec672567ab14b2e0b31ce096.jpeg

 

IMG_4268.thumb.jpeg.542dd6393b057c454ed099cf51d778c9.jpeg

 

IMG_4272.thumb.jpeg.3b84b36308bc7ed5454d49f932ba17dd.jpeg

 

IMG_4267.thumb.jpeg.0aef1351865ddb093d5b57695de218fc.jpeg

 

 

IMG_4265.thumb.jpeg.7ebdba664bd0cb58fd3de9ca41674ffc.jpeg

 

IMG_4271.thumb.jpeg.0b0ee69a035101d3e6379dc96c6b747c.jpeg

 

IMG_4269.thumb.jpeg.6a1cd9c37e5244137aef879bebaad616.jpeg

 

IMG_4270.thumb.jpeg.56cf9a3dbf72c28817db6097a1398cf7.jpeg

 

IMG_4275.thumb.jpeg.c76227205ce3164b58abe7e60e9fd338.jpeg

 

IMG_4274.thumb.jpeg.289477247622b037d0a9854ecfd3e000.jpeg

  • HMC changed the title to HMC- NEW 1996 FIESTA GHIA AUTO
Posted

rented a brand new one in 98

theyre ace - far better than mk3s

1.25 is the only engine to have in them

  • Like 2
Posted

Welcome to the rusty Fords owner's club. I love those Fiestas, they are such a joy to throw around. 

I must admit I didn't realise they were sold with a CVT. I wonder if it's related to the Fiat joint-venture where they co-developed the CVT 'Selecta' that was in the Uno (and Panda I think) along with the Mk3 Fiesta. 

How are your rear beam bushes? If they're knackered you get some enjoyable* passive rear-steer. 

Posted

We had a ghia in pepper red with same lump - 51 plate. Lovely around town but too buzzy for the motorway ( the mpg at motorway speeds was not good ). Lovely beige interior and aircon.

Sadly once the rot appeared it seemed to spread at an alarming rate - I touched the rear arches up a few times and then spotted the sills had the integrity of fog.

It was like watching a bunch of flowers die.

I sold the car but it never went through another test due to terminal grot.

 

Posted

Nice Fiesta! Internet wisdom suggests the gearbox is already on borrowed time, but if it’s made it this long, hopefully it’s a good one. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...