For Sale Autoshites *official* WANTED/OFFERED thread...

[Station]

Starion!

 

[groovylee]

I have some smiths gauges for sale.  forgot to get measurements, but can do that later if anyone is interested.

 

twin gauge pod, one capillary oil pressure, one ammeter. in good condition. untested as only just found them in a pile of spares I got, but no reason to suspect they don't work:

 

 

 

 

 

this one is a tacho, all the wires connected, its about 4-5" diameter if I remember correctly, but can get measurements later. looks dirty, but I can have a go at cleaning it up if needs be:

 

 

 

 

looking for £20 + post for the first ones, and £40 + post for the tacho? the tacho is £135 new   - http://www.ebay.co.uk/itm/Smiths-Classic-Max-Hand-Tachometer-Rev-Counter-80mm-0-8K-RPM-Chrome-Bezel-/141661028140?hash=item20fba7bf2c

 

Lee

[chodweaver]

Hi all

 

A friend is selling this. It strikes me this is shite personified, and I'd rather it goes to a shiter than she get's messed about, or has to bridge it.

 

https://www.gumtree.com/p/rover/rover-211-se-8v-great-little-runner.-sun-roof.-5-door-hatchback.-/1134109302

 

Cheers

[catsinthewelder]

I've been offered loads of mechanical bits for Sunnys and Cherrys before they hit ebay,  anyone else on here need owt?

[Noel Tidybeard]

i can haz a n13 sunnay wotcha got?

[catsinthewelder]

1500 engine, box, power steering, suspension etc. It's not mine but I was given first refusal before it hit eBay. I'm going to buy the front callipers as an insurance policy against mine seizing up. How far away from Ludlow are you?

[catsinthewelder]

i can haz a n13 sunnay wotcha got?

. I've just got back from his house clutching new callipers and a carb. There is a gearbox, complete exhaust, drive shafts, more carbs, 1500 engine etc. He's just sold this

[Jim Bell]

Thats not an N13. But I bet it has holes drilled in the bootlid.

[catsinthewelder]

Ooops just checked and it's B11/N12.

 

I don't remember holes,  why?

[Jim Bell]

It looks like one that was up on eBay 6 times with a big spoiler bolted on to the boot. May be a totally different one though.

[stephen01]

looking for a house radiator 300-400 high and anything from 900mm- 1500 wide, single/ double what you got?

[RobT]

Wanted: welding skillz. If any southern shiter who can weld would like to earn a few quid, I need a few bits done on the Cavalier soon. Rear OS sill/lower arch is a definite, and the NS too maybe. Pic below gives an idea, I had a poke and there are now holes. Doesn't have to look pretty, just want it to pass the MoT which is due end of October. Cheers!

 

[Alan_Green]

Guildford too far?  If not I can recommend this fella. Not me, just someone I used recently. Definitely won't rip you off:  Ford Mechanical Services Tony Ford 01483 456226 Unit 7 Westfield Road Slyfield Industrial Estate GU1 1RR

[RobT]

Only 30 miles away, will PM you Alan.

[sporty-shite]

Got a Sony CD changer and remote control unit. This fits in sequence with your aerial and so can be played through any radio. Has a small remote control, which can be hidden somewhere in the car, and a control box which goes behind the radio. Perfect for playing CDs without having to butcher your dash for a head unit. GR8 4 CLASSIX

 

£30 collected from Bolton. Can post, but not sure how well it would survive.

 

Can post pictures of anyone is interested.

[outlaw118]

 

 

Can post pictures of anyone is interested

I'm interested in pictures of Kelly Brook.

 

Preferably with her norks out.

[outlaw118]

Anyone got any (preferably) Peugeot wheel trimz kicking about. To fit 306, 14" I believe. 

 

Obviously a set of alloys would be better, but I R POOR.

[The Moog]

Anyone got any (preferably) Peugeot wheel trimz kicking about. To fit 306, 14" I believe.

 

Obviously a set of alloys would be better, but I R POOR.

I have set of 15 inch proper pug trims. Just stand further away from the trims and closer to the car and they will match.

[sporty-shite]

I'm interested in pictures of Kelly Brook.

 

Preferably with her norks out.

http://cdn.images.express.co.uk/img/dynamic/79/590x/Kelly-Brook-571481.jpg

[jonathan_dyane]

Wanted:

 

Saab C900 or 9000 steel wheels.

[Richard]

Wanted:

 

Saab C900 or 9000 steel wheels.

Is that for a late 900 with rear handbrake? The GM 900 wheels should fit too. Front handbrake 900s had a different PCD.

[jonathan_dyane]

Unfortunately I think the GM900 had 5 stud wheels so are no good. My car is a rear handbrake model so the wheels need to be 1987 on C900 or 9000.

 

Cheers Richard though.

[mitsisigma01]

looking for a house radiator 300-400 high and anything from 900mm- 1500 wide, single/ double what you got?

Hi stephen01 , whereabouts are you , a mate of mine stripped out a conservatory that is coming down , I will try and get hold of him but logistically where are you ?

Dave

[Jim Bell]

Peugeot 205 1.6 gti SMR alloy wheels. 14 inch and 4x108 PCD. Good for Peugeots and Citroens. Three with good tyres. Two bare wheels. Also have correct bolts if required.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Price is £55 collected. Located NE30 North East coast.

[Des]

Those Pug wheels also fit Escorts for that mid nineties thieving scummer look.

[Stanky]

4x Dulop Sport BlueResponse tyres, 195/65/r15 flavour. They will be removed at the weekend to make way for 4 more of the same.

 

They are date stamped 2013 so relatively new and have 3mm or so tread left, about the same amount above the wear blocks as below. They'd pass an MOT like this but I got given 2 virtually new tyres and bought 2 brand new ones from TL for buttons so will change them out before they become slicks!

 

No damage or sidewall repairs. No kerbing damage on the outside.

 

Collection preferred from Fareham, Hampshire but I can package them up for a courier. I'd estimate the gross weight at over 40kg so might need to be 2 separate parcels since most couriers have an upper limit of 25kg based on previous experience. Buyer to arrange courier.

 

Two are slightly more worn on the inside edge due to tracking being a bit out I suspect, but not bald by any stretch of the imagination.

 

Price - £12 each or all 4 for £40?

 

Any interest? PM me in case I forget to check back on this thread.

 

Pics, in case you don't know what a tyre looks like:

 

 

Edited October 9, 2015 by Stanky

[KruJoe]

Peugeot wheel trimz... to fit 306, 14" I believe.  

Obviously a set of alloys would be better, but I R POOR.

There's a choice of cheap and nasty 14" Pug alloys up here in Yorkshire (swap for TSBastard? )

Are you heading to GLF in Scotchland?

[Station]

I'd like a dead horrid old Metro, the early 80s type in horrible bog spec, preferably City or City X. Selling all the cars I don't need and want something grim to take me to work and back when I feel like I need a break from the comparable luxury of the mini.

[Petrolize]

 

Rover 600 TI alloy wheels, also suitable for all Rover 800 models...

 

Needing to sell this half decent set of Rover 600 16" Six-spoke alloy wheels

 

Fitted with fairly good tyres (2x Federal, 2x Fullrun) - size 205/55/R16 - these will get through an MOT if required.

 

I mistakenly paid £££ on ebay not all that long ago, but need the money now

 

£90?

 

Please PM for more info - Collection best but regularly in the central belt so can deliver - or can look into sending by courier.

 

[Lankytim]

Any shite old BMX bikes going spare? I have a flymo strimmer engine I want to mount to one. Oh, and a skateboard wheel for the drive.