For Sale Autoshites *official* WANTED/OFFERED thread...

[Christine]

A million mk1 fiestas were made by 1979.... with 2 badges per car ...  +  still another 4 years of mk1 fiesta  production.. and mine were  still pale blue , made in in 1982   ..  Rare,   why??

 

 Because Toms got them all !

[AlabamaShrimp]

Well mine was registered 24th January 1983 so it must have been built in 82 as well. In a few days you'll find if your special or not

[Christine]

2 x   205 60 16 tyres   wanted  shortly... 

[michael t]

Anyone got the rear door seals from a MK4/5 Fiesta? and if so would you be prepared to post them to Ireland? 

[Christine]

Thanks Dodgytom !! You said " pretty ladies southern rock and obscure cars"  .. so not so secret santa bringing  you this   tomoz.. Vintage car and hairy girl mag...a whole  50p's worth ! 

 

       

[AlabamaShrimp]

Well I have to thank dodgytom too as two lovley new* badges turned up this afternoon! When I find that tape my car will no longer not have a nose

 

Took photos of two of my Fiestas

 

Mk1

 

Mk2

 

I think they're both the same shade but that the mk2 boot one has faded

[egg]

SOLD: This was lurking in my local library book sale today - for sale at cost price (50p!) + postage to shitters!

[hairymel]

Anyone got the rear door seals from a MK4/5 Fiesta? and if so would you be prepared to post them to Ireland?

the rubbers round the door apertures?

[mat_the_cat]

Is anyone after an upgraded front anti-roll bar for a Cortina Mk3/4/5? I've fitted a Cortina bar to my Stellar as the original fouled on the replacement engine, and the Hyundai is thicker in diameter. I read somewhere that it's a sought after upgrade for Cortinas so may as well sell it.

 

No idea of the value, say £25 plus whatever postage would cost (guessing around a tenner), which is less than I paid for the Cortina ARB. Or could bring to Shitefest.

 

 

Plus it comes with a brand new pair of genuine Hyundai bushes!

 

[D Spares & Tyres]

how many freight rover ones is there?what do they/it look like I can see the back of 1 in the pic

These are the only Freight Rover ones I can find. They are better condition than the Ford ones

[matty879]

These are the only Freight Rover ones I can find. They are better condition than the Ford onesIMG_20160213_114330.jpg

pm sent

[D Spares & Tyres]

Thanks Dodgytom !! You said " pretty ladies southern rock and obscure cars"  .. so not so secret santa bringing  you this   tomoz.. Vintage car and hairy girl mag...a whole  50p's worth ! 

 

IMG_2717.jpgIMG_2716.jpgIMG_2715.jpgIMG_2714.jpg

       

It arrived today!

 

Luckily the Mrs was upstairs and didn't hear the post arriving!

 

Thanks, although I've not had a look at it yet ☺

[Christine]

It arrived today!

 

Luckily the Mrs was upstairs and didn't hear the post arriving!

 

Thanks, although I've not had a look at it yet ☺

 

 

 

 

http://www.ebay.co.uk/itm/Mayfair-Magazine-Volume-10-No-1-Vintage-Mens-Glamour-Magazine-Lesley-Anne-Down-/281923524334?hash=item41a3f396ee:g:tDoAAOSwcBhWWC27    Kin' hell £15 !!! Stick it on ebay !   

[Jim Bell]

WANTED - 14inch 4x108 steels with decent tyres. Skinnier the better.

[Christine]

]Book sale ! Loads to come! Hardback , Iota 500cc motor racing 1950's £15 posted



Nardi (the best steering wheel man! ) rare hardback book £20 posted

 

Lets call it Fiesta .Story of MK1 Fiesta project Bobcat .  softback bit tatty .. £8 posted

 

 

Best book ever !  1st edition too British Leyland   jeff daniels  dust jacket creased

 

sold

 

[barrett]

I will definitely have the Nardi book. If you're getting rid of lots I might wait and see what else you have before sending any mone... Also I've just remembered I was gonna but a book off someone on here LAST YEAR and forgot all about it ffs!

 

I do want the BL one too but can't justify it at the moment

[Landy Mann]

NOS Ignition coils shitter price £10 ea +postage should fit lots of things, part number cross reference is here. http://smpe.elcome.co.uk/ecat/ViewPart.asp?p=11040&cid=77178227&pt=1&i=3 collection may be possible south oxon or mk.

 

Edit: 2 available

 

 

David

 

Sent from my XT1068 using Tapatalk

[Kiltox]

Again far too modern for here but if anyone has some stuff for a Fiat Panda MK2 cluttering their garage/shed I'd be interested

[Nev]

Hello chaps and chappettes, due to the recommencement of my going round and and round in circles on a Sunday (NOT BA**ERS) I'll need a twin wheel trailer, capable of taking a Sierra...that's been lowered...more than a bit. 

 

I'm more than aware it may need a bit of fettling to make everything happen, but WOT YA GOT? £500 or less if possible....and I'll have the moon on a stick while you're at it. 

 

As cheap as possible OBVS, and not silly miles away. I'm Grays Essex.

 

PM me PURLEEZ....

[Crusty Sills]

Sata Air Fed half mask 55780 with belt, filter and gauge.

Brand new although box a little battered.

Wanting £60 for it.

 

 

 

NOW SOLD.

[Jikovron]

Im looking for an 8valve rover K series cylinder head as im hoping to resurrect a forgotten metro,its got omghgfkettle syndrome and as the engine reached nuclear i reckon the head will be annealed scrap fodder so im covering bases theoretically

[D Spares & Tyres]

Pm 'the old bloke next door'

 

He has one and he's only about an hour from you ☺

[tul66]

In a similar vein, does anybody have a Fiat Panda manual that'll cover an '87 model? Cheers.

Might have one in the garage. As check out at the weekend if you want?

[The Moog]

Set of 4 Peugeot 15inch wheel trims

 

 

£20 plus postage.

[Alan_Green]

Yes please on the wheel trims. (Think they will fit a Pug Expert van).

[The Moog]

Cool PM me your details and we can sort out getting them sent.

[matty879]

These are the only Freight Rover ones I can find. They are better condition than the Ford onesIMG_20160213_114330.jpg

pm sent about the fright rover badges tom

[Bfg]

HELP Citroen specific tools for : CITROEN  GS  / Citroen Ami-8 Super

 

Next month (middle of March) I plan to drive down to Slovenia to start on the recommissioning of my recently acquired Ami-Super.

 

42 years old and 30k miles (on the clock) this car is (mechanically) original with the G10 Citroen GS 1015cc OHC boxer 4-cylinder motor and the GS 1220's gearbox / inboard disc brakes. 

 

I'll start by replacing the aged cam-belts and servicing the motor, before progressive working through the whole car ; replacing old n' dry grease with new.  I've bought new brake pads, callipers and wheel cylinders, so I'll check and fit those as required. I'll also run through the ignition & electrics, etc. as well going around the body panels, body shell & chassis ..to treat her to a little TLC and paint       

I'll be working like a mobile mechanic, from the back of my Autoshite van (216k Chrysler Voyager), so I've made a list of garage tools and equipment I'll probably need - but at the moment I don't have any . Citroen-specific tools.

Can anyone advise what I'll need ? and what I can make do without.  And as importantly where I might get / borrow them from ? (for two weeks), or else dimensioned sketches if I can quickly make them.

Big thanks. Pete

[garycox]

Anyone breaking a Mk1 Clio?

 

My (offside) tailgate hinge has snapped; it's bolted to the car and welded to the tailgate and there doesn't seem to be an easy way of fixing it.

 

A replacement tailgate (in green) would be handy, if a bit drastic, but otherwise if anyone has a scrap one lying about that they could chop the hinge section out of I might be able to get that glued into my one.

 

Also need an electric driver's door mirror as mine has been knocked while parked.

 

THANKS

 

EDIT - while I'm begging for stuff, a Mk2 Mondeo offside rear brake caliper is also required if anyone has one lying around. Mine's a 2.0 Ghia X estate.

 

££££ WAITING (yes, four pounds)

[benly202]

Hey bfg, sorry nothing to offer but good luck, a worthy mission and i hope it goes well