Ask a Shiter

[twosmoke300]

that looks to be the same set up as the a2 which I struggled with then gave up, resigned to parking on level streets only and in gear

 

the mot garage can sort it out in September

 

Possibly the easiest rear shoe set up to adjust 

[Fabergé Greggs]

As mentioned on the pushbike thread, I've broken my right humerus and so made my right arm unusable for anything other than very light manipulation, which obviously prevents me from driving any of my cars, since they're all manuals (including the Clio Baccara, which I bought because it had had a manual box conversion!).

 

So since I have trade insurance now I'm wondering if I could buy a sensible badermatic runabout for a bit, with reference to the Indicator Stalk thread to make sure it's on the left. Something sensible like an X300 XJ6 with two months test remaining, perhaps.

 

Is it legal to drive a non-adapted auto with only one functioning arm?

I did a very very good job of breaking my left arm and the consultant told me no driving for 6 weeks. When I questioned that, he pointed out that it would be illegal to drive against medical advice.

 

Mine was a very hefty injury though, so you might be fine!

[Mally]

Don't think it's illegal, you can drive with one eye or one leg.

May make sense to put a ball on the steering wheel if you can still get them.

I'm deaf in one ear. OK getting silly now!

[Mally]

MOT due on 75, believe they check tow bar electrics now?

Mine may* not be fully functional. Thinking of removing ball and electric socket, can't fail on the socket then........can it?

Think it needs a new black box for canbus crap. Will fix it when/if I have a new mot. 

[busmansholiday]

Think they only check tow bar electrics if its the 13 pin euroshite one as with the old UK one you could virtually wire it as you wanted.

[gm]

Possibly the easiest rear shoe set up to adjust

 

Maybe, but I'm a cack handed bodger

[Mally]

Think they only check tow bar electrics if its the 13 pin euroshite one as with the old UK one you could virtually wire it as you wanted.

 

Ah mines a 7.

Well about 2 or 3 really.

[Eddie Honda]

See section 4.10 of the MOT manual:

 

https://www.mot-testing.service.gov.uk/documents/manuals/class3457/Section-4-Lamps-reflectors-and-electrical-equipment.html#section_4.10

[AlabamaShrimp]

Apart from compressing the springs how hard is it to change the suspension on your drive?

[Eddie Honda]

Just like indoors if it's not raining. I'd do it.

[AlabamaShrimp]

So excluding weather conditions and weather it's inside or out. Is anything special needed tool wise or anything like that or is it just a case of undo everything?

[320touring]

So excluding weather conditions and weather it's inside or out. Is anything special needed tool wise or anything like that or is it just a case of undo everything?

Depends on the car - mercs usually need special compressors.

 

Another top tip is slacken but do not remove the topmounts bolt with the car on the ground - the load stops the damper Rod spinning.

 

I assume the car in question has McPherson struts?

[AlabamaShrimp]

^^I didn't think of that and yeah it's a mk2 Fiesta.

[Mally]

See section 4.10 of the MOT manual:

 

https://www.mot-testing.service.gov.uk/documents/manuals/class3457/Section-4-Lamps-reflectors-and-electrical-equipment.html#section_4.10

 

Thanks for that Eddie, I did try wading through it all without success.

Mines all secure and looks the part, but is 7 pin. I'll leave it as is. Can't see the point fixing it if it's going to the bridge!

May well pass, it did last year, eventually.

[chodweaver]

Can anyone recommend a place close to Southampton docks where a slap up breakfast can be purchased on a Sunday morning?Meeting ChodWeaver Jr #1 for breakfast and a fry up is the order of the day...

[Rave]

There's a Spoons fairly near the cruise ship terminal. Had a mixed grill there with my missus when I took her down for the day to see my old stomping grounds.

[Eddie Honda]

Thanks for that Eddie, I did try wading through it all without success.

Mines all secure and looks the part, but is 7 pin. I'll leave it as is.

As you can see, they don't check wiring for function, but they should check if it's absolutely hanging.

[omegod]

Is there an easy/known engine transplant that can be done to a dolomite ? i.e. moar powerrrrrr 

[Sigmund Fraud]

Is there an easy/known engine transplant that can be done to a dolomite ? i.e. moar powerrrrrr 

 

TR7 ?

[omegod]

TR7 ?

was hoping for a tad more power, 250 bhp ish....saab turbo ?

[New POD]

TR7 ?

mx5?

[bub2006]

Me and hooli have fitted a relay in the headlight circuit on the trike and another relay in the main beam circuit. Now the small issue is when I put main beam on the dips stay in too. Is there any way of wiring it to turn off dips when main are on? Cheers

[DodgeRover]

Check the switch, feed to low beam relay should be cut when main is on.

Normally unless that's a Reliant quirk.

[MorrisItalSLX]

I thought that the dips always stayed on with the main? I don't recall ever seeing a car where they turn off.

[Guest Hooli]

Me and hooli have fitted a relay in the headlight circuit on the trike and another relay in the main beam circuit. Now the small issue is when I put main beam on the dips stay in too. Is there any way of wiring it to turn off dips when main are on? Cheers

 

Yes mate, like I said at the time we didn't have the correct switch so I couldn't wire it properly. Remember those bloody stupidly expensive switches from that bike shop? We need an on/on toggle (I think that's the term) so it either connects the power to the dipped or the main circuit.

[Guest Hooli]

Me and hooli have fitted a relay in the headlight circuit on the trike and another relay in the main beam circuit. Now the small issue is when I put main beam on the dips stay in too. Is there any way of wiring it to turn off dips when main are on? Cheers

 

Found one at a sensible price https://www.ebay.co.uk/itm/Mini-Miniature-Toggle-Switch-Waterproof-Cover-ON-OFF-ON-ON-ON-OFF-ON/401460086406?hash=item5d78e2c686%3Am%3AmmKEmE-xREc1YSsYtFQ2wsw&var=671123523165&_sacat=0&_nkw=on-on+switch+waterproof&_from=R40&rt=nc&_trksid=p2380057.m570.l1313.TR10.TRC0.A0.H0.Xon-on+switch+waterproof.TRS0

 

Chose these options -

 

 

Then it'll be simple enough to swap out that black toggle switch for this & get it functioning correctly. It's only a 6amp switch, but as all it's running is relays that's plenty. Only other bits needed is 6" bit of wire & either two female red spade connectors to crimp on or a bit of soldering.

 

It says a 6mm hole, from memory that's the same as the switch used currently.

[bub2006]

I forgot that bit! Yes that's the badger. The wiring is a bit home made but still probably better than Tamworth's finest when new!

[Guest Hooli]

Get the switch & I'll pop over to sort the wiring as I can't remember exactly what is there to tell you what to do from here.

[Bobthebeard]

This is purely out out if interest and nothing to do with me. But.

A friend has just bought a BMW Z3 sight unseen on eBay with the intention of turning it into an AC Cobra replica using the Kobra kit. (Yes, I know....)

He says the body has plenty of rust scabs and looks a bit shit but 'hopes' it is structurally sound. Hmmm.

Have no experience of these things so is he in for a world of pain potentially? Are they known for disintegration?

It is a fairly early 2.2 I believe.

[egg]

I have a replacement PAS pressure switch for my Mondeo (used but supposedly known good). I sealed it in with PFTE. However, as with the old one it is leaking straight through the electrical connector (not where it joins with the PAS pipe) as in the 3rd pic  . Any ideas please?

 

I really wish I hadn't changed the fluid!