Jump to content

Ask a Shiter


warren t claim

Recommended Posts

Posted

^ Thanks I read the warnings on the back of the bottle. Being a sensible* member of society I left the rag in direct sunshine, with some kitchen paper to see if I achieved spontaneous combustion. Nothing. Disappointing. 

 

I then tried heating it in a tin can, but still nothing. 

 

Finally just tried setting fire to the rags, but they burnt in a disappointing fashion. 

 

Overall it appears safer than the bottle suggested.   

Guest Hooli
Posted

That's be my approach to it too, you need to see how dangerous it is to allow for it.

  • Like 3
Posted

Was there a shiter with an environmental management degree (or something similar) looking for work in the north east?

Hullo!

  • Like 1
Posted

A mate of mine has a problem with egr valve :

2001 Accord SE Executive 2.0 VTEC.

 

www.autocodes.com/p1491_honda.html

 

Any ideas ? Quick fix ?

Posted

Which means taking off the inlet manifold,if it's the same design as a 1.6.

Posted

Similar. Iirc there is a sandwich plate between the head and manifold with a weird maze shaped groove cut into it that fills up with soot

Posted

Hullo!

I'll be in touch shortly (once the advert goes live)

  • Like 2
Posted

Right. Just sold a car and the Norn Iron fella who bought it has paid me mainly in Norn Iron banknotes. He insisted they were ok to bank in English banks, but google doesn’t really help.

Will NatWest tell me to FRO with my notes?

This should not be a problem in any bank as they are Sterling notes.

 

It can be great fun in shops as the NI notes are issued by local banks. So you can be faced with sterling notes with Bank of Ireland printed on them.

Posted

Is a ZX 1.9D auto a terrible idea? 

 

What kind of MPG's do they do? 

Posted

Is a ZX 1.9D auto a terrible idea? 

 

What kind of MPG's do they do? 

No

 

Don't know sorry, but I would imagine 50 to be easily achievable with minimal consideration.

Posted

Since you fixed my fading bumpers, I have another query, this time about rubber matting.

 

The van has very germanic wipe clean rubber matting over the floor and cab area. The vertical bits no longer stay where they were supposed to - scene answer is to replace (not sure why I bothered asking).

 

Contact adhesive doesn't seem to work - it smells nice, and it makes me happily light headed, but the rubber falls back off in a day or two. Any ideas (not accepting peanut butter as the answer this time though) about a suitable glue which will hold and resist the gentle warmth of the interior in summer? 

 

Also, the mats have flappy bits that cover over things you might later want to open, these have all torn along the crease line. Anything better than gaffer tape to put these back with?  

Posted

Is a ZX 1.9D auto a terrible idea? 

 

What kind of MPG's do they do? 

 

I had one just over 20 years ago. It won't set the world alight with performance but perfectly able to do the job needed.

 

I cannot remember MPG's and it would be skewed by the fact I was using it to teach people to drive in it.

Posted

Also, the mats have flappy bits that cover over things you might later want to open, these have all torn along the crease line. Anything better than gaffer tape to put these back with?  

There is high temp contact adhesive available, often recommended for upholstery jobs for the reason you outline, things falling off when the glowy thing in the sky is persistently glowy.

Posted

Have the values of small Malaysian pickup trucks taken a sudden leap in the past month or so?

  • Like 1
Posted

Call an ambulance, man - I think you are having a stroke or carbon monoxide poisoning or something.

Posted

Why do modern brake drums on humdrum cars (peugeot 107 for example) have fins/ridges rather than a smooth outside like they always used to?

 

I thought it was for special regenerative brakes like Priuseseses have, but the rear brakes on a 107 won't do this will they? They can't get hot, so its logically not for heat disipation, strengthening ribs maybe?

Posted

I bet it'll be so they can use less metal by fitting something more like a pie tin than a brake drum.

Posted

Help.

I've lost the keys for the Oldsmobile. They might be in the boot.

As well as using the key to open the boot, there is a remote button in the glove box. It needs the ignition to be on.

 

Can I hot wire this switch by taking a live feed direct from the battery?

Any other suggestions?

Posted

 Taking a live from the battery with a length of wire should work unless its switched earth or something dumb like that. Alternatively If it has a stereo, temporarily connect the ignition live and permanent live feeds together which should power up the switch and release circuit.

  • Like 2
Posted

re: brake drums and fins, i'd have thought this was for cooling. didn't oldendays race cars have hopelessly massive drums with fins?

 

Its still probably less hassle to have rear drum brakes than discs (VAG group piss poor effort anyone?) and just jazz them up a bit?

 

 

1955-mercedes-benz-300-slr-layout.jpg

 

 

This was roughly what I was thinking of? Watched a morbid documentary on the 195x le mans 'everybodies dead Dave' crash and some of it talked about how the Jag couldn't beat the merc on speed but was more reliable (195x recording of the engine flat out is astounding) and had disc brakes so tried to win by forcing the merc to blow up. instead an awful lot of people died. good watch but sad times.

Posted

Yeah like that, but smaller - 12" diameter maybe?

 

I couldn't see how they'd be for style* in something as ruthlessly costed as a 107 though, it must have some kind of purpose otherwise they'd just use the normal flat metal cylinder they've used since the 1920s?

Posted

what for it mean


 


'Pineapple'


 


?


 


I looked in the lexicon but didn't see it. applied to VW camper van and VW scene types but i don't understand?

Posted

just drum up (a ha ha! kill me.) more efficiency out of the back brakes by cooling them better oi rek'n. And its probably a bunch cheaper to have some sucker supplier provide the manufacturing lines with finned drums than retool to have rear discs in a powerhouse 107?

Posted

I need to learn to read.

 

However there was a good tie up of Red Dwarf references cross posted between the drum brakes and the 'what is pineapple' thread.

 

which is something.

Posted

Help.

Jump a cable from the battery positive to the stop solenoid. That will liven the ignition circuit and hopefully enable the remote release button.

Posted

Help.

I've lost the keys for the Oldsmobile. They might be in the boot.

As well as using the key to open the boot, there is a remote button in the glove box. It needs the ignition to be on.

 

Can I hot wire this switch by taking a live feed direct from the battery?

Any other suggestions?

 

Can you get into the boot via the back seat?

Posted

Tried that but not without breaking things.

I had to abandon it yesterday so will head back this morning and try the electronic options.

 

Lesson 1: get spare keys cut.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...