Jump to content

The new news 24 thread


Recommended Posts

Posted

Just open the windows and feel the wind in your hair! 

My dad tells me off for opening the window when I drive his car. All about the air movement 👌

Posted

Went to another event yesterday, which was held in a town with the rather unimaginative name Huizen ("Houses").

This Barockengel was my personal favourite, original paint and upholstery:

52189153974_53b278c6f2_b.jpg

1930s "Volpi" V16 racer:

52188871878_80c41b522e_b.jpg

1904 White:

52189504700_37662d43dc_b.jpg

Many more pics behind the spoiler!

Spoiler

52188862161_81f5327dd0_b.jpg

52189121299_a23a92f618_b.jpg

52189351080_6b658fb915_b.jpg

52188884918_b177b5970f_b.jpg

52189369010_66c0097d79_b.jpg

52188899123_953236e80d_b.jpg

52188934478_17c8fcd308_b.jpg

52187906707_cdcc5f60ed_b.jpg

52188949476_cfea02db45_b.jpg

52188949296_5f7b772b85_b.jpg

52188949106_a525f9795f_b.jpg

52188975453_3a32f5b497_b.jpg

52187947872_46a826c7f8_b.jpg

52189217394_81da5851aa_b.jpg

52188972931_e64d3652b0_b.jpg

52189236954_16dbff377b_b.jpg

52189236819_7eaca5fdd1_b.jpg

52187993257_98dc4cd60d_b.jpg

52189021088_9f932dcf31_b.jpg

52189020061_6bd2407578_b.jpg

52189052103_de0def572d_b.jpg

52189051616_b98b0fd673_b.jpg

52189051461_50316b7f2e_b.jpg

52189304734_61a4343d30_b.jpg

52189318154_d64ebda74d_b.jpg

52189076833_67b71b1f1b_b.jpg

52188062182_8193e5e9b2_b.jpg

52189090633_5d9ae48d83_b.jpg

52189317494_14b72c02c3_b.jpg

 

Posted
44 minutes ago, D.E said:

This Barockengel was my personal favourite, original paint and upholstery:

52189153974_53b278c6f2_b.jpg

 

The what now???

Posted

Picked this up last Friday evening. 

1996 VW Golf 3,1.9 N/A diesel.

She's a ripe one,but it runs good so will make a good engine doner for a Mk2 Golf. 

Ideally I wanted a turbodiesel one,but these are now extremely thin on the ground. 

I do have a 1.6 turbodiesel engine I was going to use,but needed various extra parts,crankshaft pulley,power steering pulley,starter,vacuum pump,and various other bits n pieces so in the end it was more cost effective to pick up a runner and cannibalize that.

Bosch injection system too,so veg friendly.

216k,and it has history up until 148k,timing belt was done at 207k along with the water pump,but the camshaft seal is weeping and the belt has the appearance of being a bit damp,so will have those jobs to attend to.

Spending it's life on the west coast of Ireland hasn't done the body work any favours at all,the Atlantic coast is vicious.

20220703_170536.thumb.jpg.bcd99f91dd4ace6e41766035962ff18e.jpg

20220703_170552.thumb.jpg.c42e8f629d8cbc5a035187b7a943a9fe.jpg

20220703_170747.thumb.jpg.6144159dbf40140283574c06889b4861.jpg

IMG-20220702-WA0001.thumb.jpeg.7b1b0a6d93ba9cc7030fd9c191cc86d5.jpeg

 

 

Posted

Picked this up at a boot sale today.

1980s Sharp Cassette player. 

Paid €5.00 for it,that's my limit for this kind of stuff.

20220703_165642.thumb.jpg.d2708518269c589a855f73d890de1dd5.jpg

Pleased to say it actually works well.

Posted

ironic that the safety equipment caused it to flip

Posted

I did a buy today. Best car I’ve owned by a mile, and I’ve owned a fair few. Powerful, comfortable, practical and economical. Love it and it’s a treat to myself. Literally nothing needs doing. When I get a chance, I’ll clay bar and ceramic coat it. 

A2C06FB7-C2C9-4D79-84FB-738E8E6B09CF.jpeg

Posted

Checked the prices of Volvo 240s now and it looks like I will never be able to afford one again. All under 3,000 pounds in Norway are rusty wrecks. This below is a 2200 pound 240 in Norway.

Galleribilde

Galleribilde

It is also an auto something I dislike as much as the rust. So this makes me sad as I like these and would love to have one again.

  • Like 1
  • Sad 2
Posted
12 hours ago, BorniteIdentity said:

Did you treat it to a regas m8?  It normally works for about 8-12 months once topped up!  Maybe it's finally let go though...

A bit cooler today, just 34deg, and they sent a pic of this neat mileage as they headed back up the Adriatic coastline:

DTD4.thumb.jpg.8b59344758e816b6064c5a8448cc81c7.jpg

1,721 miles recorded from Norfolk before they turned around headed for home. Looking at their route they'll be close to 4,000 by the time they get back here.

DTD6.thumb.jpg.b7b29bb83daa9195e29e0c0e34f8ba3a.jpg

Apparently the car is using a bit of oil - particularly on the hills - and the wiper motor is suspect, but otherwise it's going well.

Posted

Got the gearbox mount on the Innocenti changed yesterday.  It was fairly straightforward in the end, everything came undone easily, it took a little while to prise the old inner mount out of the metal frame and the gearbox needed some wrangling with the jack to get the holes to line up, but overall it was relatively easy.

Knackered old mount out, shiny new mount in.

20220702_182354.thumb.jpg.3ea0860cb08441b0a2cc581a3b1b6129.jpg

And all back together again.

20220702_183613.thumb.jpg.327a9903d4f3edacbcff30d50e55d975.jpg

Took it for a drive and the dreadful whining / scraping noise it used to make under acceleration in the lower gears has completely gone, so that's a result.  I tried adjusting the clutch cable having managed to free off the adjuster, but it's not given me any more bite, just more free play at the pedal, so I'm definitely going to have to do the clutch at some point.  I also changed the fuel filter as the one on there was ancient and rather manky looking - took a couple of attempts as I didn't get a good enough seal first time around to allow the fuel pump to pull petrol through.  It's running a bit better but still kangaroos occasionally under acceleration.  I've ordered it a new air filter as the existing one hasn't been changed in my ownership and is looking a bit grey - when that arrives I'm going to take the housing off and give the carb a good blast out with cleaner, see if that sorts it.

I made a start on the Volvo brakes - didn't get as far as I wanted as the weather was a bit variable, but I've got the nearside rear caliper off.  To my surprise the brake pipe union came undone easily - the caliper bolts took a bit more persuasion though (not a lot of clearance and suspension bits in the way so I couldn't get a breaker bar on there, ended up using a ratchet and twatting it with a lump hammer, not ideal but it worked).  The caliper can't be removed from the disc with the brake pipe still attached as it's a rigid pipe - the flexis run to the axle just to the nearside of the diff and then it's metal pipes from there to the calipers - so I've sealed (hopefully) the end of the pipe off with a female union blocked up with JB Weld.  I will just double check it in the morning to make sure the fluid level hasn't dropped - if it does I might have to put a clamp on the flexi.  I've cleared several decades' worth of cobwebs and dead leaves off the caliper and squirted some penetrating oil round the pad retaining pins - I'm going to have a go at getting them out and lubing up the pistons tomorrow when I finish work.

I had a quick look at the air filter on the Rover 75 as that hasn't been changed since I bought the car either and I've done a few miles in it now.  It actually still looks pretty clean, although there were some paper towels in the housing for some reason which was a little odd.  Annoyingly when doing the housing bolts back up I managed to drop a 5mm Allen key and it disappeared into the bowels of the engine bay.  Fortunately it's at the opposite end of the engine to all the spinny bits so touch wood it's unlikely to get caught up in anything, and it was only a cheap Rolson job anyway, but it means I now have another incomplete set which is annoying.

I've upgraded the horns on the Maxus and the 107.  Each had a single tone disc horn, the Maxus' was low tone and the 107's was high tone.  So I bought a pair of disc horns off eBay for the princely sum of £5.22, and fitted the high tone to the van and the low tone to the Pug, using piggyback connectors.  The Maxus was easy enough to do but the 107 was more of a pain - the horn is behind the bumper and the only easy way to get to it is to take the undertray off, but when I tried this one of the captive nuts came loose and just span, so I ended up having to prise the wheel arch liner away from the bumper and squeeze my hands through the gap.  Got there in the end, and the horn sounds rather less pathetic now so that's good.

That was about it for the weekend's fettling - I've got a couple of bits on order (brake pads for the Renault 6 and a headlight relay for the 121) which should be here during the week, so that's the plan for next weekend, weather permitting.

  • Like 8
Posted

Just sprung to mind that I passed a house the other day with 90's-00's PSA chod aplenty parked outside! 

Out one side was a pre facelift Citroen Berlingo, 2x silver Xsara Coupe's, a silver Xsara estate and round the other driveway was a Xsara Coupe that looked immaculately clean, with no reg plates, in that fetching yellow/gold colour like the one below

image.thumb.png.c36a9823242b56cdb0da8bf8ea1462ce.png

Taking a look on streetview, they've clearly been 90's-00's PSA chod botherers for some time:

In 2009: (ignoring the Octavia)

MVIMG_20220703_225324.thumb.jpg.d41d8b049204a7bbe7eadb03aac0e9c7.jpg

MVIMG_20220703_225755.thumb.jpg.c5b85ab1309e86a86f82129d6f4b3cda.jpg

In 2011:

MVIMG_20220703_225509.thumb.jpg.9f8b9f17d3126d644516c553fc5a7747.jpg

In 2012: 

MVIMG_20220703_225357.thumb.jpg.11835e9e09ce834aeb8e8a256a459d8d.jpg

MVIMG_20220703_225551.thumb.jpg.03ac76213bf2e3b924630f7558956f98.jpg

(Would love to know whats under that cover, which can also be seen in 2009 from another angle)

In 2015:

MVIMG_20220703_230029.thumb.jpg.6957ef02d308b4dd0327bc545463bc4a.jpg

MVIMG_20220703_230138.thumb.jpg.1d428c117365d75458e28df88c1663f8.jpg

In 2018: 

MVIMG_20220703_230242.thumb.jpg.c7bfe2575b466737cd5e16a8255ea35d.jpg

And 2020: 

MVIMG_20220703_230331.thumb.jpg.04691536e6b4bbcf98272b9fe0159791.jpg

MVIMG_20220703_230506.thumb.jpg.ad475e129ab60af059fa859a63e102ec.jpg

I love how shonky the blue van is. 

I wish I had time to stop and speak to the owner!

That Xsara estate is the one I saw the other day, none of the Xsara Coupe's were in these streetview images unfortunately. I thought they're pretty rare now? So was surprised to see someone with three of them! 

  • Like 2
Posted
14 minutes ago, RoverFolkUs said:

I love how shonky the blue van is.

Any Sevel Sud van of that generation painted in anything other than white will eventually lose its paint.

  • Like 1
Posted
8 hours ago, wuvvum said:

Got the gearbox mount on the Innocenti changed yesterday.  It was fairly straightforward in the end, everything came undone easily, it took a little while to prise the old inner mount out of the metal frame and the gearbox needed some wrangling with the jack to get the holes to line up, but overall it was relatively easy.

Knackered old mount out, shiny new mount in.

20220702_182354.thumb.jpg.3ea0860cb08441b0a2cc581a3b1b6129.jpg

And all back together again.

20220702_183613.thumb.jpg.327a9903d4f3edacbcff30d50e55d975.jpg

Took it for a drive and the dreadful whining / scraping noise it used to make under acceleration in the lower gears has completely gone, so that's a result.  I tried adjusting the clutch cable having managed to free off the adjuster, but it's not given me any more bite, just more free play at the pedal, so I'm definitely going to have to do the clutch at some point.  I also changed the fuel filter as the one on there was ancient and rather manky looking - took a couple of attempts as I didn't get a good enough seal first time around to allow the fuel pump to pull petrol through.  It's running a bit better but still kangaroos occasionally under acceleration.  I've ordered it a new air filter as the existing one hasn't been changed in my ownership and is looking a bit grey - when that arrives I'm going to take the housing off and give the carb a good blast out with cleaner, see if that sorts it.

I made a start on the Volvo brakes - didn't get as far as I wanted as the weather was a bit variable, but I've got the nearside rear caliper off.  To my surprise the brake pipe union came undone easily - the caliper bolts took a bit more persuasion though (not a lot of clearance and suspension bits in the way so I couldn't get a breaker bar on there, ended up using a ratchet and twatting it with a lump hammer, not ideal but it worked).  The caliper can't be removed from the disc with the brake pipe still attached as it's a rigid pipe - the flexis run to the axle just to the nearside of the diff and then it's metal pipes from there to the calipers - so I've sealed (hopefully) the end of the pipe off with a female union blocked up with JB Weld.  I will just double check it in the morning to make sure the fluid level hasn't dropped - if it does I might have to put a clamp on the flexi.  I've cleared several decades' worth of cobwebs and dead leaves off the caliper and squirted some penetrating oil round the pad retaining pins - I'm going to have a go at getting them out and lubing up the pistons tomorrow when I finish work.

I had a quick look at the air filter on the Rover 75 as that hasn't been changed since I bought the car either and I've done a few miles in it now.  It actually still looks pretty clean, although there were some paper towels in the housing for some reason which was a little odd.  Annoyingly when doing the housing bolts back up I managed to drop a 5mm Allen key and it disappeared into the bowels of the engine bay.  Fortunately it's at the opposite end of the engine to all the spinny bits so touch wood it's unlikely to get caught up in anything, and it was only a cheap Rolson job anyway, but it means I now have another incomplete set which is annoying.

I've upgraded the horns on the Maxus and the 107.  Each had a single tone disc horn, the Maxus' was low tone and the 107's was high tone.  So I bought a pair of disc horns off eBay for the princely sum of £5.22, and fitted the high tone to the van and the low tone to the Pug, using piggyback connectors.  The Maxus was easy enough to do but the 107 was more of a pain - the horn is behind the bumper and the only easy way to get to it is to take the undertray off, but when I tried this one of the captive nuts came loose and just span, so I ended up having to prise the wheel arch liner away from the bumper and squeeze my hands through the gap.  Got there in the end, and the horn sounds rather less pathetic now so that's good.

That was about it for the weekend's fettling - I've got a couple of bits on order (brake pads for the Renault 6 and a headlight relay for the 121) which should be here during the week, so that's the plan for next weekend, weather permitting.

I think the housing screws for mine are 6mm, strange. I use an extra long allen key to get to the ones down the back. The most stupid design ever, imagine having to take off an engine cover, ducting and then another cover just to change an air filter!? The filter is inordinately large too, almost as big as a lorry one.

Posted
8 hours ago, Spottedlaurel said:

A bit cooler today, just 34deg, and they sent a pic of this neat mileage as they headed back up the Adriatic coastline:

DTD4.thumb.jpg.8b59344758e816b6064c5a8448cc81c7.jpg

1,721 miles recorded from Norfolk before they turned around headed for home. Looking at their route they'll be close to 4,000 by the time they get back here.

DTD6.thumb.jpg.b7b29bb83daa9195e29e0c0e34f8ba3a.jpg

Apparently the car is using a bit of oil - particularly on the hills - and the wiper motor is suspect, but otherwise it's going well.

Was it serviced before it went off and - if so - did he put 5w30 in it?  I found it would use 5, but 10w40 would do a good 5-6,000 miles without needing a fill up.  I used to just service it every 5k so there was less oil to get rid of!

The little yellow light will ALWAYS come on when the oil level gets to the minimum mark on the stick, at which time it needs another litre to go from empty mark to full mark.  

Good to see it plodding.  Superb old thing.

  • Thanks 1
Posted
7 hours ago, HarmonicCheeseburger said:

Skoda Fabia 1.4 or a MK IV Golf 1.6?

Autobox only of course.  Which is the least headache likely day to day?

Make sure it's a 16v 1.4 Fabia. That's all

Otherwise I expect they'd be fairly similar

Posted
11 hours ago, sims00 said:

I did a buy today. Best car I’ve owned by a mile, and I’ve owned a fair few. Powerful, comfortable, practical and economical. Love it and it’s a treat to myself. Literally nothing needs doing. When I get a chance, I’ll clay bar and ceramic coat it. 

A2C06FB7-C2C9-4D79-84FB-738E8E6B09CF.jpeg

Looks great, I'll have dibs please :D

  • Haha 1
Posted
12 hours ago, sims00 said:

I did a buy today. Best car I’ve owned by a mile, and I’ve owned a fair few. Powerful, comfortable, practical and economical. Love it and it’s a treat to myself. Literally nothing needs doing. When I get a chance, I’ll clay bar and ceramic coat it. 

A2C06FB7-C2C9-4D79-84FB-738E8E6B09CF.jpeg

Well played

Genuinely can’t believe nobody bought it sooner. Absolute bargain.

  • Like 1
Posted
15 hours ago, junkyarddog said:

Picked this up last Friday evening. 

1996 VW Golf 3,1.9 N/A diesel.

She's a ripe one,but it runs good so will make a good engine doner for a Mk2 Golf. 

Ideally I wanted a turbodiesel one,but these are now extremely thin on the ground. 

I do have a 1.6 turbodiesel engine I was going to use,but needed various extra parts,crankshaft pulley,power steering pulley,starter,vacuum pump,and various other bits n pieces so in the end it was more cost effective to pick up a runner and cannibalize that.

Bosch injection system too,so veg friendly.

216k,and it has history up until 148k,timing belt was done at 207k along with the water pump,but the camshaft seal is weeping and the belt has the appearance of being a bit damp,so will have those jobs to attend to.

Spending it's life on the west coast of Ireland hasn't done the body work any favours at all,the Atlantic coast is vicious.

20220703_170536.thumb.jpg.bcd99f91dd4ace6e41766035962ff18e.jpg

20220703_170552.thumb.jpg.c42e8f629d8cbc5a035187b7a943a9fe.jpg

20220703_170747.thumb.jpg.6144159dbf40140283574c06889b4861.jpg

IMG-20220702-WA0001.thumb.jpeg.7b1b0a6d93ba9cc7030fd9c191cc86d5.jpeg

 

 

Some of those na 1.9 engines have a TD block. It may be possible to adapt the 1.6 turbo onto it. I've seen it done on a couple of T3s.

Posted
40 minutes ago, artdjones said:

Some of those na 1.9 engines have a TD block. It may be possible to adapt the 1.6 turbo onto it. I've seen it done on a couple of 

I'd never be that lucky!🤣

The turbo I have on the 1.6 is actually from a 1.9,so I have all the bits.

Posted
1 hour ago, junkyarddog said:

I'd never be that lucky!🤣

The turbo I have on the 1.6 is actually from a 1.9,so I have all the bits.

Look on the back of the block, it may say 1.9TD.

  • Like 1
Posted
11 hours ago, HarmonicCheeseburger said:

Skoda Fabia 1.4 or a MK IV Golf 1.6?

Autobox only of course.  Which is the least headache likely day to day?

About the same as from a similar era of VAG. Iirc they should be proper slush boxes and not the troublesome CVT that some VAG have. Like any auto at that age, it's probably never had its fluid changed and most will be starting to be fucked. 

Posted
14 hours ago, wuvvum said:

Any Sevel Sud van of that generation painted in anything other than white will eventually lose its paint.

The red ones aren't too bad for paint falling off, but they usually look as if they had a respray using red oxide primer.

Posted

I feel like I've gone back in time, do I want a Custom Car or Loadsamoney T-shirt?

20220704_182745.jpg

20220704_182711.jpg

Posted
22 hours ago, Dyslexic Viking said:

Checked the prices of Volvo 240s now and it looks like I will never be able to afford one again. All under 3,000 pounds in Norway are rusty wrecks. This below is a 2200 pound 240 in Norway.

Galleribilde

Galleribilde

It is also an auto something I dislike as much as the rust. So this makes me sad as I like these and would love to have one again.

My only auto 240GLT estate was a pain in the bum, it never ran right. I'm also priced out of 240 estates  they are still one of my favourite cars, although my current Citroen ZX estate has a similar comfy, relaxed way to travel.

  • Like 1
Posted
24 minutes ago, anonymous user said:

My only auto 240GLT estate was a pain in the bum, it never ran right. I'm also priced out of 240 estates  they are still one of my favourite cars, although my current Citroen ZX estate has a similar comfy, relaxed way to travel.

Yes there are cars that have some of the same qualities as the 240 but it will never be the same for me as there is something special about them that is difficult to explain.

Posted

So it looks like my Mondeo is not regenerating the dpf because its covered in oil from the turbo having an oil leak. 

Sad news, but it has done well, in 9 months all its needed is a drop link. 

So Volvo is getting a tidy Ebay tow bar and working the daily jobs while i look for something fun* with a tow bar to do the daily work grind in the long term. 

  • Like 1
Posted
24 minutes ago, Dyslexic Viking said:

Yes there are cars that have some of the same qualities as the 240 but it will never be the same for me as there is something special about them that is difficult to explain.

You don't need to explain, I have had several over the years, plus a couple of Amazons and a 164. My father was a Volvo man which introduced me to them, I've never had the front-wheel drive ones, although my brother has had several.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...