Jump to content

F**ked Black Rover 827 SLi - The Mistake Machine


Recommended Posts

Posted

Engine earth strap, if no sparks even for the explosive gas option?

Posted
  On 06/05/2024 at 09:53, RichardK said:

Engine earth strap, if no sparks even for the explosive gas option?

Expand  

There was a spark at the plug lead ends, looked a bit yellow but strong enough. 

Posted

How frustrating. Wish I were a bit closer and could join in helping ๐Ÿ˜•

Posted
  On 05/05/2024 at 22:04, Noel Tidybeard said:

strange that it wouldn't run on the Cosby-in-a-can

Expand  

Sorry to be thick chaps, but what's this?

Posted

Easy start, the main ingredient which is Ether. :)

Posted

Thereโ€™s a lot to reply to here.

  On 05/05/2024 at 20:28, Mr Pastry said:

Not intending to be critical of what you guys are doing btw. we all work different ways and I wasn't there.

Expand  

I donโ€™t think anyone here, especially me, has thought any different. Like @Matty said this place is full of top blokes and a lot of them are here.

I wonโ€™t be at the car this weekend, but next weekend Iโ€™ll go and provide a feed to the fuel pump. In the meantime Iโ€™m going to look at the diagrams etc and see if there is a secondary pump (probably isnโ€™t) just in case.

I would like to check the strength of the spark too. We got a spark at the king lead and then at one of the plugs. But then I know @Lankytim commented that the spark was yellow in colour. So may be that the amplifier needs to be changed (which was mentioned by the exhaust people when it was cranking for them but not starting).

Once again thank you for all the help.

  • Like 2
Posted
  On 06/05/2024 at 19:03, St.Jude said:

Thereโ€™s a lot to reply to here.

I donโ€™t think anyone here, especially me, has thought any different. Like @Matty said this place is full of top blokes and a lot of them are here.

I wonโ€™t be at the car this weekend, but next weekend Iโ€™ll go and provide a feed to the fuel pump. In the meantime Iโ€™m going to look at the diagrams etc and see if there is a secondary pump (probably isnโ€™t) just in case.

I would like to check the strength of the spark too. We got a spark at the king lead and then at one of the plugs. But then I know @Lankytim commented that the spark was yellow in colour. So may be that the amplifier needs to be changed (which was mentioned by the exhaust people when it was cranking for them but not starting).

Once again thank you for all the help.

Expand  

Can confirm @Mr Pastry knows his onions. Has pulled me out of the mire on more than one occasion! ๐Ÿ˜ƒ

Posted

if the stars align you can use the power probe to prod the fule pump if that makes it easier/saferer ๐Ÿ˜

Posted
  On 06/05/2024 at 16:51, barefoot said:

Sorry to be thick chaps, but what's this?

Expand  

Yeabbut, what connects Ether with cosby?

Posted
  On 06/05/2024 at 20:30, High Jetter said:

Yeabbut, what connects Ether with cosby?

Expand  

Fuck knows, that's why I asked.

Posted

i wondered if he'd used it to subdue his "friends"

Posted

Easy start is volatile. A yellow spark is a weak spark. Do these have an amplifier on the distributor?

Posted

Ether I know. Cosby, no- Bill's dead.

Posted
  On 06/05/2024 at 21:16, Bren said:

Easy start is volatile. A yellow spark is a weak spark. Do these have an amplifier on the distributor?

Expand  

Yeah it does, itโ€™s perched near the wing above the fuse box.

Posted
  On 07/05/2024 at 07:17, St.Jude said:

Yeah it does, itโ€™s perched near the wing above the fuse box.

Expand  

I know when these failed on SD1's ( only 3.5's had them ) the car would die completely but then restart once everything had cooled.

Posted
  On 05/05/2024 at 16:33, Lankytim said:

....maybe the incorrect relay is fitted?

Expand  

Now, I may well be remembering the wrong 'restoration' thread of the previous owner, but I definitely remember there being plenty of fuckabout with relays, trying to find other relays from other cars, etc and so on, and my impression was certainly that the approach taken could well be the kind that leads to relays being borrowed from other cars and/or random things that fit just being wedged in.

Posted
  On 07/05/2024 at 07:38, Bren said:

I know when these failed on SD1's ( only 3.5's had them ) the car would die completely but then restart once everything had cooled.

Expand  

They're fitted to RRC's too:

Glucas-dab118-ignition-module-rover-v8-genuine-lucas-m11__82464.1704792812.jpg?c=2

Go down totally randomly - will start one moment then nothing the next. Can be responsible for a very weak spark, fooling you into thinking it should start. But it won't.

Sound familiar?

Posted (edited)

Hi there,

I didnโ€™t read all replies since my last visit, so apologies if itโ€™s already mentioned.

Did you already check the main relay (officially โ€˜EFI relayโ€™ in the docs)? A known issue was that the solder was badly done and it develops cold joints that crack, giving erratic behavior. The main relay controls your fuel pump and is interfaced with the ECU. It is not your everyday, simple relay. It is a key element of the entire starting and running states of the car. The Legend got it too. Takes a little searching, but there are good explanations out there. Let me know if you need practical info on this part and Iโ€™ll try to find something usable in my archives.

If spark is weak, you could (after checking/replacing plug leads) take a look at the igniter module. It amplifies the ECU spark output before it goes to the ignition coil (itโ€™s basically a power transistor as the ECU, which gets itโ€™s signal from the ignition pick-up sensor, canโ€™t drive the coil directly). It is in the (attached) wiring diagrams (aka fault finding manual) 

Edit: Please see attached also schematic of the main relay. There are multiple editions of wiring through the years. If you have VIN earlier than 276672 you must use images 0174 and higher attached. Else use the other schematics. You can find it usually somewhere up in the driverโ€™s and/or passengerโ€™s footwell where more relays are located. Be warned: It can be hard to find.

IMG_0170.png

IMG_0171.png

IMG_0172.png

IMG_0173.png

IMG_0174.png

IMG_0175.png

IMG_0176.png

IMG_0177.png

Edited by rovik88
Main relay
  • 1 month later...
Posted

Updateโ€ฆ

Nothing has happened. One reason or another Iโ€™ve not been near it and thereโ€™s been a holiday etc. I have been looking for an igniter though. When I remember to anyway.

Was talking to a bloke at work today as he asked about it. He threw up the possibility that the exhaust place who had it when it was cranking, but then failed to start, itโ€™s possible they may have disconnected some gearbox wiring underneath while doing the exhaust.

Very possible, and not a difficult thing to look at/for. So thatโ€™ll be something to look for next time Iโ€™m there.

  • Like 5
  • 2 weeks later...
Posted

Little update.

There was a Rover 827 Sterling that had a fight with a tree. The tree won.

IMG_6486.jpeg.13a418f02fcd6c9b6ff0cc3246b4814a.jpeg

IMG_6487.jpeg.ae2e24f6d7b4589eac3a85e2c21a8f31.jpeg

An oak tree fell on it, and it completely fucked it. As is typical with the internet, many a person said it could be fixed. I messaged the guy asking for some parts if he was breaking it but heard nothing. Someone else on the group had bought it for a few parts himself, and was parting the car out.

I messaged him with a list and he said โ€œok Iโ€™ll have to cut the bonnet openโ€. Thought that was weird, but the car is bananaโ€™ed. The bonnet, the doors, even the boot wonโ€™t open right. Itโ€™s properly collapsed on the passenger A pillar, and while the original owner had plans to restore it - if the tree didnโ€™t get it the rust would have. It is set in in places you could never see.

Anyway, this is wot I got.

IMG_6485.jpeg.123667d1c6324028ecb83238aa4628c3.jpeg

Ignition igniter.
Ignition coil.
Inhibitor switch.
Main Relay.
2 relays for around where the passenger light sits.
Control unit.

All in for ยฃ30. The main relay, on the outside at least, is in much better condition than mine. The ignition coil actually looks to fit mine but canโ€™t remember off hand.

I wonโ€™t be at it next weekend, maybe next weekend Iโ€™ll change a few of these around and maybe itโ€™ll move.

Posted
  On 08/04/2023 at 09:33, Honey Badger said:

You normally hear a buzz as it brings the pressure up in the fuel system, if i think about it my D16 engine Rover 216 did the same.

I had to replace the main relay in My Accord Coupe with the J series V6, it was ยฃ60 from Honda.

 

Expand  

This is worth repeating, if your getting no fuel pressure it's likely the pump isnt priming due to the Fuel relay being borked, usually dry joints.

When My V6 Accord wouldn't start it would crank and crank but no fuel was present as the fuel pump was getting no power.

It's worth taking the top off that Mitsuba relay and checking that it's working properly and there are no obvious dry joints.

If you need a new one they are reasonable from Honda main dealers, it might be worth asking Cox's Honda how much one would cost.

Good luck with it, hope the new parts fix it.

  • Like 1
  • Thanks 1
Posted
  On 14/07/2024 at 15:58, Honey Badger said:

This is worth repeating, if your getting no fuel pressure it's likely the pump isnt priming due to the Fuel relay being borked, usually dry joints.

When My V6 Accord wouldn't start it would crank and crank but no fuel was present as the fuel pump was getting no power.

It's worth taking the top off that Mitsuba relay and checking that it's working properly and there are no obvious dry joints.

If you need a new one they are reasonable from Honda main dealers, it might be worth asking Cox's Honda how much one would cost.

Good luck with it, hope the new parts fix it.

Expand  

So the relay I have had water damage, but it looks proper battered on the outside anyway. 

Fuel relay wise it was sticking on a bench test, but was working over all. But Iโ€™m going to swap that first and see if it makes a difference. Regardless, other than it being a backward step and the car not working at all, the new one will go in full time.

Posted

A relay can be jumped. All you need is a piece of wire to create the bridge the relay would otherwise create. If the relay really is the problem then you could very easily rule that out. Stick a wire in the right connectors the relay would normally plug into and the pump would immediately buzz away.

  • Agree 3
Posted
  On 14/07/2024 at 15:18, St.Jude said:

Little update.

There was a Rover 827 Sterling that had a fight with a tree. The tree won.

IMG_6486.jpeg.13a418f02fcd6c9b6ff0cc3246b4814a.jpeg

IMG_6487.jpeg.ae2e24f6d7b4589eac3a85e2c21a8f31.jpeg

An oak tree fell on it, and it completely fucked it. As is typical with the internet, many a person said it could be fixed. I messaged the guy asking for some parts if he was breaking it but heard nothing. Someone else on the group had bought it for a few parts himself, and was parting the car out.

I messaged him with a list and he said โ€œok Iโ€™ll have to cut the bonnet openโ€. Thought that was weird, but the car is bananaโ€™ed. The bonnet, the doors, even the boot wonโ€™t open right. Itโ€™s properly collapsed on the passenger A pillar, and while the original owner had plans to restore it - if the tree didnโ€™t get it the rust would have. It is set in in places you could never see.

Anyway, this is wot I got.

IMG_6485.jpeg.123667d1c6324028ecb83238aa4628c3.jpeg

Ignition igniter.
Ignition coil.
Inhibitor switch.
Main Relay.
2 relays for around where the passenger light sits.
Control unit.

All in for ยฃ30. The main relay, on the outside at least, is in much better condition than mine. The ignition coil actually looks to fit mine but canโ€™t remember off hand.

I wonโ€™t be at it next weekend, maybe next weekend Iโ€™ll change a few of these around and maybe itโ€™ll move.

Expand  

I might be in the area so Iโ€™ll drop in if possible.

Posted

image.jpeg.b406fbbadc3324fb8f7bbc1c7d60980a.jpeg

 

i'll wager the one near the centre is making you twitch just a little bit๐Ÿคฃ

  • 2 weeks later...
Posted

Got a text and a video from my sister today.

IMG_6526.png.41f2bf3b12b1a475c5434188ddeb7c95.png

This jackass rings the door, momโ€™s at home but doesnโ€™t really pay much attention to the doorbell. She hears a car door opening and goes to the window.

This prick just helps himself, opening the car door and having a good look (at a mess really). Wants to know if itโ€™s for sale. The mother says no, itโ€™s a friends car. He says OK and goes off.

So sheโ€™s keen to see the car move, or at least be locked!

Posted
  On 24/07/2024 at 16:55, camryv6 said:

I clicked the the video lol

Expand  

Iโ€™d upload it but fucked if I know how.

Well I do know but I just canโ€™t be arsed. All it is he rings it, looks at the car and tries the door. Then he gives it a look.

Posted
  On 24/07/2024 at 16:32, St.Jude said:

Wants to know if itโ€™s for sale. The mother says no

Expand  

I thought it was?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
ร—
ร—
  • Create New...