Jump to content

My beige Rover


Recommended Posts

Posted

Top Buyage Sir, looks a proper thing. Coolant flush and change would be a good idea as you've said, purely due to mileage - or lack of, let alone the possibility of OMGHGF.

There's been a few of these on here @Angrydicky has one, I'm sure he'll be along to offer support/warnings.

Posted

Very nice indeed! Tiny mileage too so should have loads of life left in it. I guess the 416 of that age had a Honda engine, but I might be mistaken there of course.

Posted

What a buy! Great cars indeed.  I had a diesel saloon for a bit and loved it, effortless thing to drive. Also has the Diesel ZS for a small while which was again, a nice thing to drive.

Good to see proper mats in it too. A rare thing indeed.

Posted

Only the automatic models still used the Honda engine; this will have the K-series.

  • Like 2
Posted

That looks lovely!

 Still never owned a Rover, need to correct that one day soon.

Top buyage! 

Posted

Not many 400s left now. I can't remember the last time I saw one with the early front. Nice purchase indeed!

Posted

I'm quite excited really,is the cambelt a DIY job on these? I suspect it's never been done. Needs front wing painting or replacing,a rear tyre and a service but I'm very pleased with it,who knows I might be able to join in some shite events now once things get a bit more normal again!

  • Like 3
Posted

Thankyou! I will of course try popping the unit out in case it's written on it

Posted

Don't believe it's too tricky to do a cambelt on these. I've a feeling a locking tool helps but I think it can be substituted for something else. It's amazing condition and colour! 

I'd be tempted to fit a low coolant light on any K series, but maybe that's overkill. Fresh coolant definitely wise.

Posted

Lovely looking 400 I sold my one a few years back  and it was a big mistake on my part as it ran like clockwork and was immaculate after I changed two of the doors and polished It up.

Mine had the Honda lump though as it was an auto and I bought it off an old girl for £250 then spent about £400 on it only to sell it with a years mot for £200 somehow I don’t think I would make a car dealer and it looks like it’s still giving sterling service.

C45D4B3F-43E9-45C8-923F-01F0D600EC37.jpeg

44B09BF9-8ABB-41F0-ABF2-5177D474ECC7.jpeg

66810412-B6EB-4B66-AB46-CFA4912976A3.png

Posted

Got this booked in for an MOT on Thursday morning,couple if things I know of that might need doing but it will be good to get someone to have a good check over it,I'm fairly confident though :-) alk so strange,and expensive! For me having only had old bikes for so long now,I know it will all balance out,I managed to insure it for £300 FC which I thought reasonable as I have zero no claims having not owned a car for five years.

Checked the colour code and it actually old English white,thought it looked familiar!

  • Like 2
Posted

My K series cars have almost always struggled with emissions, hope yours goes through this bit without any issues - get it nicely warmed up.

Posted

Thanks for the tip,it's s good 6-8 mile run to the test,will take s longer route,primary reason I went to look at it in first place was it's excellent mot history,so hoping it will behave,there is an exhaust blow somewhere,the back box is pretty crusty so could be that

Posted

Looks a nice one! I’ve had a diesel 400 and petrol ZS, loved them both, great cars :) 

Posted

This got bunged in for an MOT this morning,passed with an advisory on two tyres which I knew about,and a bit of rust near a front suspension mount,under drivers floor,I had a quick look as I hadn't seen it and I think it will wire brush,rustkill and stone chip. not bad for a 21 year old Rover :-)

interior lights was just a missing fuse, exhaust was deemed fine,it just sounds fruity.The emmisiond were better than most modern cars the tester said, extremely low,which is great as I haven't put new filters and plugs in yet due to non arrival from ecp.

Posted

Garage quoted me 320 to fit a cambelt kit and water pump,does that sound reasonable? Though I could probably do it myself it's not really something I want to tackle and would take me far longer than the time they've quoted for! They were quite complimentary on the car and were of the opinion that it wasn't worth doing the head gasket unless it started to play up,and they've known them run to 70k plus before any signs.

  • Like 2
Posted

I paid £270 to have them done on my Rover 45 last year so it doesn't sound too bad IMHO. 

Posted

Yes 320 is not bad. Depends on hourly rate they charge.

Posted

Think it was 40 an hour,three hours,I know for a fact it would take me much longer!

Posted

This has been surprisingly rewarding to work on,the advisory for rust on inspection was nothing more than a blister under the underseal and a bit if light surface rust,I peeled it back,wire brushed and rust killed and now has a coat of zinc primer.habent worked out what rubbery spray to use yet.if that's all he found we are in good shape.Front towing eyes were a bit scabby,again a wire brush and they are very solid,so they have had the same treatment. Changed the oil and filter as it was in definite need of a change,new air filter,and replaced the pollen filter which was the original and disgusting!

Haven't driven it yet as haven't changed the tax class,plus at the moment im not going anywhere do didn't see the need,though I would like to drive it a bit to get a bond going.overall so far it's proving to be worthwhile of s bit if effort and hopefully will give me a few years motoring 

  • Like 5
Posted

It would be well worth you removing the sill covers and treating/painting any surface rust under there. Mine had started to go at the front on both sides but I just caught it in time before it needed welding. There was a lot of mud packed in there too.

  • Like 1
Posted

Have also been reading up more on the cambelt change,aside from a few awkward bits like removing the crank pulley it is certainly within my abilities,just not my comfort zone.would certainly save a fair wedge if I did it myself.

  • Like 3
Posted

If you have the time it is probably well worth you having a go at it.

You have proved that you are more than capable of series jobs but I understand the comfort zone feeling.

Posted

I remember being apprehensive of doing a cambelt change.  Done countless since, go for it, loads on here to help if you need it.

Posted

SWMBO bought one new. The only troubles of note were a water leak behind the cylinder head - just an O ring, a holed radiator and fatigue-failiure of the bracket that holds the clutch slave cylinder.

When she had the Rover, I bought a new Golf*.  The Rover was a much better car in every  possible way. Poor Rover died of engine abuse on the M4 one night, at about 150,000 miles because she ignored the rattling and oil warning light ("because I was in a hurry").

**Twat

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...