Jump to content

Ask a Shiter


warren t claim

Recommended Posts

Posted

Is this sort of thing a guaranteed mot fail ?

 

post-4462-0-90019900-1439823057_thumb.jpg

 

The hanger broke loose and left a dirty great hole in the centre section

 

post-4462-0-60434500-1439823143_thumb.jpg

 

post-4462-0-69561500-1439823170_thumb.jpg

 

I'd have a go at welding a patch over it but having spent the afternoon practicing with the mig, it turns out that I am shit at welding and the chances of getting anything remotely gas tight are pretty slim.

 

I did fix* the hanger though :)

 

post-4462-0-28704600-1439824026_thumb.jpg

  • Like 1
Posted

Reasonably gas tight and otherwise still supported should be OK. Looks from the pic to have plenty of hangers left ;)

 

Small leaks are an advise but do have a habit of playing havoc with the emissions even if they aren't bad enough to fail because they pull fresh air into the exhaust and the computer thinks the lambda value is off.

Posted

A friendly * tester would never* put a bit of rag over the end of the exhaust to make the lambda ok to get a pass . Or at least to be able to do a fasttrack retest !

  • Like 2
Posted

this bit is now gas tight but it turns out there are another couple of leaks further up the system, one where the four braches meet and another just after the lambda sensor - if this gets a pass, I'll buy everyone* a beer ! the test isn't due for another month so I'll just enjoy it for now and worry when the time comes.

 

the hanger / clamp device seems to work well though

 

post-4462-0-31150700-1439835690_thumb.jpg

Posted

What year is the car (looks like a MX5?) cos if it's a H plate it won't get a cat test anyway, and J and K plates get extra leniency.

Posted

I like to mention the phrase "low volume import" when putting anything imported in for a test.. If it is an MX5 an it's a grey import then it should have a relatively lenient emissions test.

Posted

Did you know all Q plate cars get treated for test as if made in 1971 with 1975 emission levels?

  • Like 2
Posted

well spotted, it is a 1990 (H plate) imported mx5 so should get a basic test - there's never been a cat fitted in the years I've owned it but last year the emmisions were borderline - I'll give it a good thrashing on the way to the garage this year, just in case :)

Posted

Did you know all Q plate cars get treated for test as if made in 1971 with 1975 emission levels?

My Q plate gets tested as a 1971 and emissions are only for visible smoke.

Posted

I have a pair of original cats of the c43 merc I just got rid off, will a normal scrap dealer no what there worth or do I need to go to some specialist catalytic converter seller bloke of the World Wide Web.?

Posted

Can anyone identify my fuel pump in the Scim? I think it's playing up.

 

post-7629-0-16948000-1439845156_thumb.jpg

 

post-7629-0-65485200-1439845186_thumb.jpg

Posted

My Q plate gets tested as a 1971 and emissions are only for visible smoke.

 

Is it a diesel?

Posted

Vehicles having a Q plate registration when presented for MOT are to be treated as follows:  For emission purposes only, all these types are to be considered as vehicles first used before 1 August 1975. For all other testing purposes they are to be considered as being first used on 1 January 1971

 

Guess what? Visual smoke only is correct. More stupidity on the part of the manual, gas testing starts for vehicles built on 1st August 1975, so why bother with the whole 1971/1975 thing? The procedure is the same for both!

Posted

Recently had a car tested within a month of the expiry and it came back with a pass with the expiry of the day it was tested meaning I have lost almost a month. Has something changed with the new system or has it cocked up? Is it worth pursuing or not?

Posted

I have a pair of original cats of the c43 merc I just got rid off, will a normal scrap dealer no what there worth or do I need to go to some specialist catalytic converter seller bloke of the World Wide Web.?

Wasn't dodgytom off here offering good prices for branded cats?
Posted

My brother has a W-reg Rover 25. How difficult is it to programme a new key fob for one as his broke, was soldered by the RAC but after a few months is being temperamental. Is this the turning the key 8 times thing?

Posted

Cheers for the offer. I recon I'd need to go and see it then get it delivered back if I bought it .

Cos what I need is another project . Flippin cars. I just need one more hit. One more hit and that's me clean

zammo_just_say_no.gif

Posted

I'm starting to get some vibration through the clutch pedal and a slight judder when pulling away. Could that mean the clutch itself is on the way out?

Posted

zammo_just_say_no.gif

 

It's now down to 650 quid. How can I say NO? Tell me???

Posted

Recently had a car tested within a month of the expiry and it came back with a pass with the expiry of the day it was tested meaning I have lost almost a month. Has something changed with the new system or has it cocked up? Is it worth pursuing or not?

Something cocked up, the rules haven't changed. You could go back and ask about it, the new system has been doing wierd things at times recently (when it works at all!)

Posted

Do you still have to hand over last years pass sheet to get the extra month or does the computer now know when the anniversary is?

 

Maybe an issue with the computer not working, might it rectify itself when logged? Check your expiry date online.

Posted

Computer knows the expiry date, and if you are within one calender month will automatically add the extra time. If you have more than a month to run you lose the extra and get a 12 month ticket.

Posted

My brother has a W-reg Rover 25. How difficult is it to programme a new key fob for one as his broke, was soldered by the RAC but after a few months is being temperamental. Is this the turning the key 8 times thing?

 

I think if you do the key dance in the door, it disables the immobiliser until it's locked again with the fob (so if it's buggered, it shouldn't come back on anyway).

 

To get another programmed, T4 or Testbook at an ex dealership or Land Rover place will be needed to code them again. I think you can use new or 2nd hand Lucas 17TN or 3TXB fobs (they look the same, the 2 button with embossed padlock on one button) but not 100% on the 2nd hand ones.

 

There are online shops who will code new aftermarket fobs but you usually have to send the ECU away.

Posted

I'm starting to get some vibration through the clutch pedal and a slight judder when pulling away. Could that mean the clutch itself is on the way out?

Judder is usually an overheated clutch or one that is misaligned in someway. Could also possibly be a failing DMF. I'd keep going whilst it isnt slipping.

Posted

Judder is usually an overheated clutch or one that is misaligned in someway. Could also possibly be a failing DMF. I'd keep going whilst it isnt slipping.

 

 

Don't think mine has a DMF? Anyone know how much of a ballache it is to do on these?

Posted

Rear caliper is sticking on civic. Is it worth rebuilding them or just replacing them?

Can get a rebuild kit including pistiper said are going to be £200

A sticking caliper will usually free off, but inevitably seize up again in short order so often a rebuild is on the cards. Is it rear discs with internal handbrake working on a lever? The returns on these can seize, usually you can free them off but inevitably you end up replacing the unit. Nothing to lose in giving it a go.

 

Id also check it isnt a seized handbrake cable as again these have a habit of seizing in the sheathing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...