Autoshite's official for sale/wanted thread

[Magpie215]

Anyone breaking a mk2 ford galaxy sharan alhambra.

 

Possibility I may need some bits

[bezzabsa]

 

CZ / JAWA 175 / 250

 

 

OK so has anyone got one of the above littering up their shed/garage/living room, that would appreciate some plastic pictures of the Queen???

[Christine]

Fark mee !  There's a rotten old CZ in the garage next to my Astra ..full of junk. I looked through a broken window yesterday , being nosey , and saw it !! Black one , dunno what size engine . but it was a CZ ! Dunno who owns the garage though !!  Piles and piles of junk too

[doug]

More high quality tat emerges from years of hiding, todays offerings are a single port vw inlet manifold as fitted to bugs, splitties and early bays, so must be worth eleventy million pineapple points, yours for £10

 

Somewhat more specialised- a headlamp bowl and switch panel for a James J15 cadet, may also fit later cadets and other Js such as the captain (but not certain), a bit of surface rust inside the switch panel but amazing good condition for its age £20 to a shiter. Pair of villiers timing cases for same but will fit a million bikes £5 and a fuel cap/ mixer in good condition £10 or £25 the lot.

 

I also have a mini camshaft, think it’s a 1275 one but can check if anyone is interested in it.

 

Any pics of the timing cases? 

[doug]

 

Looking for one like this, but not cracked!!

[Tamworthbay]

Any pics of the timing cases?

 

If you need any more just shout,

[doug]

Thanks,but.its.slightly.different.to.what.I.am.looking.for.

 

feckinspacebarhasstoppedworkinghencethefullstops!!!!!

[Tamworthbay]

Yup, that’s an odd one, not seen one like that in years.

[doug]

hens.teeth.

[3VOM]

Last call for anyone wanting any bits off a 51 plate 1.2 Clio before I scrap the thing.

[castros_bro]

CZ / JAWA 175 / 250

 

 

OK so has anyone got one of the above littering up their shed/garage/living room, that would appreciate some plastic pictures of the Queen???

 

There's a square tank oil pump equipped type 477 near GU2 7XH if you have enough money.

 

 

 

[Tamworthbay]

Anyone after a spot welder? I have one of these I bought for a project-

https://www.machinemart.co.uk/p/csw13t-spot-welder-with-timer/

 

Runs happily off a 13A socket, never tried welding 3mm to 3mm but that may need the bigger current.

 

Had very little use (perhaps 150 spots) and I have a pair of long reach electrodes I will include that are brand new in the bag. Ideally collect from Tamworth as it’s heavy but could pack up and post if needed. Pic below. All in it was about £720 with the electrodes, £450 or thereabouts buys it.

 

 

Also in non motoring for sale as fuck knows which it actually falls under so both seemed the best idea.

 

Whitworth combination spanners £10

MX5 mk1 propshaft £0 free to collector (as in someone who picks it up, not some ducking weirdo who has decided to collect propshaft, how strange would that be? Although as I have six spares at my last count I could be that weirdo if I’m not careful).

[AnthonyG]

Armstrong Siddeley book arrived this morning, excellent service from Mr Cros .

[mercrocker]

1/24 Leo Alfacrud.   Missing a wheel and there is a small crack on the display box.   Given up finding a wheel!  

 

Still has the tape on the doors and bonnet so its otherwise mint.  Apart from the missing wheel. 

 

£7.50 posted?

 

 

[Saabnut]

A pair of front hubs for an Armstrong Siddley 346 Sapphire. When I sold mine a few years ago, I forgot to put these in the boot. The buyer was in London, and decided he did not want to fetch them or pay postage, so they have sat around since. Any takers? FOC to a collecting shiter, cost of postage or collect at Shitefest 18. If no takers, they go in the scrap pile.

[Christine]

Fark mee !  There's a rotten old CZ in the garage next to my Astra ..full of junk. I looked through a broken window yesterday , being nosey , and saw it !! Black one , dunno what size engine . but it was a CZ ! Dunno who owns the garage though !!  Piles and piles of junk too

 

Took me camera, zoomed through the missing window ...being a nosey  parker i took a picture of it  ! Too rough  ? i could make enquiries as to who owns it....

 

 

[Saabnut]

A set of 4 plastic wheel trimz for a Volvo. That much I am certain of. As to which model, the only one I can think they may have come from was a 940 Turbo I used on track days! FOC to a shiter if collected, will post for cost of postage or collect at Shitefest 18, happy to store them until then or they will go in the bin if no one wants them.

[castros_bro]

Took me camera, zoomed through the missing window ...being a nosey  parker i took a picture of it  ! Too rough  ? i could make enquiries as to who owns it....

 

 

l7 028.jpg

 

Looks like a complete CZ 125  type 488 with the twin leading shoe front brake.

[chaseracer]

1983/1984/a few 1985 copies of Motor, anyone?  

 

FOC; collect ASAP from WS12.

[AnthonyG]

If you can hang onto them until the next Cannock meet I’d give them a good home Dave.

[sporty-shite]

1/24 Leo Alfacrud. Missing a wheel and there is a small crack on the display box. Given up finding a wheel!

 

Still has the tape on the doors and bonnet so its otherwise mint. Apart from the missing wheel.

 

£7.50 posted?

 

 

DSCF5181.JPG

 

YES PLEASE. Inbox payment details please.

[mercrocker]

Sold to MrS-S....PM sent

[stripped fred]

I’m in urgent need of a 2003 onward Beetle Cabriolet for under two grand

 

Every one on eBay/gumtree has been no good. I’ve looked at too many.

Will be selling my wife's soon. Cream with a black roof. 56 plate. 1.6 petrol. 98k. Some service history. She's had it about 7 years.

[Stanky]

Wanted 4 bleed screws for Ford calipers. I do not know if they are M16 (M for Metric) or P16 (P for imPerial) so if anyone has 2 of each that they would sell, please let me know. One or other must fit but I'm not sure which ones I need, or how to find out since measuring the one remaining one I have has shown its neither 10mm or 3/8" which is what I'd have expected.

[Urban_Paranoia]

Yesterday, I managed to trash the NSF wheel/tyre on my ‘02 R75 Tourer, thanks to the impeccably-maintained roads in my area...it wasn’t a pothole...more like a crevasse.

 

195/65 R15 (pic attached)

 

Anyone got either a spare or a full set?

 

Cheers!

[loserone]

Condolences for the wheel and tyre.

 

Post reassignment in 3...2...

[BeEP]

Post reassignment in 3...2...

 

...to where no-one will see it and the OP's car will remain immobilised.  But hey, we're here to help!

[Vince70]

I had a similar thing happen on the Z3 recently and previously on my old A3 and both times eBay came up trumps with the correct alloy and I found that by the time I would of wasted driving around looking for a set it was easier and less hassle just to press the buy it now button for a wheel.

 

I think I paid £30 with delivery for the Z3 wheel and the A3 wheel cost £35 with the delivery and that was like brand new even with what looked like a brand new tyre.

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F201801737658

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F201801736131

Also there’s loads without tyres for the same price with free delivery

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F263398737462

It looks like a crown should cost about £20

[purplebargeken]

Spare car?

[TagoraSX]

I'm looking for an XJ-S coupe in good condition.

 

V12.

1987 or earlier.