Jump to content

The new news 24 thread


Recommended Posts

Posted

Look who I met!

 

20210704_154843.jpg

20210704_162840.jpg

@Sunny Jim came over for a quick drive. 

It was brilliant to meet your new car and great to see you as always. 

Posted

Current project has sat for 4 yrs and it seemed the fuel pump had seized, I popped the top off the tank and christ alive, the fuel is bright green, stinks and has dissolved all of the rubber piping within the tank to a sticky sludge, even the strainer on the pump has liquefied 

Research shows there is a bacteria that can flourish in petrol under the right conditions , never heard of it nor seen such thing before, I'm so looking forward to siphoning it out and replacing it all :( .  Fortunately the pump being seized has stopped this shite getting sucked up to the fuel rail. 

Not sure how to dispose of the 20-30 litres of contaminated fuel as the local tip won't take it, any ideas  ??????  

Posted
11 minutes ago, omegod said:

....how to dispose of the 20-30 litres of contaminated fuel as the local tip won't take it, any ideas  ??????  

Is the local arsonist at a bit of a loose end?

  • Haha 1
Posted
3 minutes ago, Tadhg Tiogar said:

Is the local arsonist at a bit of a loose end?

Lol, It's questionable if this green shite would even burn 

Posted
On 03/07/2021 at 13:41, worldofceri said:

Walsgrave Transport, earlier:

E32D52AB-550C-43D6-B45E-805B69A96BA8.thumb.jpeg.d9b99739f102d13a4cbff20342e5ee0b.jpeg

What is IT, AL? 😉 

 

Posted
9 minutes ago, chaseracer said:

What is IT, AL? 😉 

 

I thought his name was Cer...

 

Oooooh.

Posted

Obligatory collection pez shot 

IMG_20210704_195007.thumb.jpg.3e5d99f22da2ad21c2a2be4707660797.jpg

  • Like 3
Posted
13 hours ago, omegod said:

Not sure how to dispose of the 20-30 litres of contaminated fuel as the local tip won't take it, any ideas  ??????  

use a weed killer....lol

Posted

Another trip to Isle of sheppey to  clear some more of the villa, but I found a 1999 car brochure ... thought I'd share some pictures

20210704_102440.jpg

20210704_102417.jpg

20210704_102529.jpg

20210704_205325.jpg

20210704_205631.jpg

20210704_205627.jpg

20210704_205618.jpg

20210704_205613.jpg

20210704_205609.jpg

20210704_212654.jpg

20210704_205409.jpg

20210704_205358.jpg

Posted
1 hour ago, chaseracer said:

What is IT, AL? 😉 

 

No no. The redacted car is not a Morris!

Posted
26 minutes ago, stuboy said:

Another trip to Isle of sheppey to  clear some more of the villa, but I found a 1999 car brochure ... thought I'd share some pictures

20210704_102440.jpg

20210704_102417.jpg

20210704_102529.jpg

20210704_205325.jpg

20210704_205631.jpg

20210704_205627.jpg

20210704_205618.jpg

20210704_205613.jpg

20210704_205609.jpg

20210704_212654.jpg

20210704_205409.jpg

20210704_205358.jpg

The prices of the 2nd hand cars then are about the same as good examples nowadays!

  • Like 1
Posted

how do you make a small car look even smaller?

20210704_135513_resized_2.thumb.jpg.1d46056ab4d4de13b84d4272a5b2f66e.jpg20210704_135523_resized_2.thumb.jpg.f90736ed6670b744060be7fd289d6900.jpg

park it next to a bloody HUGE one!

20210704_135601_resized_2.thumb.jpg.30931107efe234b60ed3bfeaeea8a806.jpg20210704_135635_resized_2.thumb.jpg.ee750ccdd1049b4e0a202e4856f3444e.jpg20210704_135929_resized_2.thumb.jpg.63512f7a70146107da3eed5550819642.jpg20210704_135944_resized_2.thumb.jpg.4358a74635871f62a9c7935777a0c47c.jpg20210704_135951_resized_2.thumb.jpg.c8d8d67863d4499dce1cb255197e142c.jpg

this Lincoln Town Car is equipped with a 460 ci big block (7 and a half litres) with 13 mpg's.

20210704_135741_resized_1.thumb.jpg.b9b2e00491b1c4e32349aee5f0c5fa02.jpg

the mini is 61 ci, that been 998cc, and does  considerably more mpg's.

we also saw this chopped chevy pickup while out and about. its very nice too

20210704_140147_resized_2.thumb.jpg.08932b27ab258fb342b8f5fa6ac87928.jpg

Posted
2 hours ago, omegod said:

Lol, It's questionable if this green shite would even burn 

Strike a light? (Then run. Fast)

Posted

Tired out after collection caper. Suzuki isn’t going to be roffled immediately as I need to do a couple of jobs to the C2 before we can consider pushing it into daily service. Cam belt roulette isn’t a good game to play and a new backbox is also in order.

And a service. Madam’s Mini could also do with a service.

Posted
8 minutes ago, dozeydustman said:

And a service. Madam’s Mini could also do with a service.

Ooh! You are awful!

Posted

Have a feeling I might be needing this shortly 😂. Had let my policy lapse because the MG and Kangoo both have cover 

200B6CA8-E485-4479-A5AD-A0AA975A4B65.thumb.jpeg.d548f1796b076f486b6c93d7b576b737.jpeg

Posted
On 7/2/2021 at 1:54 PM, Jamie said:

It's a mate of a mate. He's only in his late 20s. He's got an Aston Martin vantage as a daily lol. He breaks bmws for a living. 

So do I pal. So do i

  • Haha 2
Posted

As mentioned elsewhere, the C2 headed off today to its new home in sunny Chichester (funnily enough that's where I bought it from).  I spent most of the day buggering about with the Renault 6 - I got the new exhaust hangers on, but that was no thanks to my new dremel which turned out to be utterly fucking useless - or rather the dremel itself is fine but the "cutting" discs it came with seem to be made of dust held together with Pritt Stick and last about 5 seconds in use - I barely managed to make a dent in the nut. 

Fortunately a few days ago I made the long overdue decision to invest in a half decent pair of mole grips, having made do with cheap shite for years, and they managed to get enough of a purchase on the <1mm of rounded bolt head that was sticking out the top of the remains of the old hanger, to allow me to hold the bolt still and wind the nut off.  The other hanger which had been slowly rusting into the floorpan actually came away quite easily, to my surprise, and all the nuts turned out to be reusable, which was handy as the new hangers didn't come with any.  So the exhaust is now nice and secure again.

The next job was to fit a flap wheel to the angle grinder and have a go at the driver's floorpan inside the car, to see just how much metal will actually need replacing.  To my surprise, the bit that is actually rotten is a fairly narrow strip - maybe 4" wide - the central section of the original floorpan still being solid and the outer section having already been replaced with a bit of metal that still seems fairly intact.  I was able to get back to nice shiny metal fairly easily on quite a bit of the surrounding floor, which should make welding in a new bit rather more straightforward.  Unfortunately the interior of the car is now covered in rust thrown up by the grinder, so I'm going to have to clean that at some point - fortunately the seats are vinyl so should wipe clean.

I haven't got a great deal more done on the Innocenti beyond yesterday's update, but I did go around checking all the essential bulbs - the nearside front indicator had stopped working because the bulb was corroded tae feck, so that's been replaced with an LED bulb - the car has an electronic flasher unit so fitting LED bulbs doesn't make it go mental.  I also replaced the main beam telltale in the dash, which involved taking out the instrument cluster - that was relatively straightforward, but when I put it all back together I realised I'd managed to pull the speedo cable out the back.  The cable wasn't long enough to reach with the cluster out of the dash, so I had to refit it, then pull off the radio blanking plate and shove my hand in behind the dash to try and wangle the cable back into place.  I got it in (not without getting covered in grease) but I'm not sure it's gone in quite right - the speedo works but the needle flickers, which it never did before.  So I might have to have another crack at it at some point, but that's rather a long way down the priority list at the moment.

The Toyota's brakes continue to baffle me.  I had the drum off again and as far as I can see everything is moving as it should, so I have no idea why it's suddenly decided to start binding on.  I might end up having to admit defeat and hand it over to the garage to sort.  I fugging hate brakes.

Posted

Did you know that Mole was a brand of adjustable vice-grips?

Posted
On 03/07/2021 at 08:31, artdjones said:

This is why everyone needs an estate:-

unnamed.jpg.bc9f9d65873a26775821e3c00dc2f317.jpg

The rest of us would have to smash it up to get it to the tip....

 

Posted
9 hours ago, omegod said:

Not sure how to dispose of the 20-30 litres of contaminated fuel as the local tip won't take it, any ideas  ??????  

I have a few full containers of old engine oil. I also have a few containers which have nothing in.  Come and take them all and fill them 50/50 oil/petrol. Take them.to the tip, (Sefton meadows) and pour them in the waste oil container.  Technically it's all a byproduct of crude oil.

Or. Get some old paint tins. Put them.in.the paint recycling bin. Its all solvent. Right. 

 

Alternatively, get some milk bottles, and rags, and start a riot. 

Or take it down the sand dunes and when it's dark, draw a picture with it in the sand, and set fire to it, photo it as art. 

 

Other legal and more environmentally friendly ideas may be available. 

Posted
5 hours ago, High Jetter said:

Did you know that Mole was a brand of adjustable vice-grips?

Yes.  Did you know that Hoover was a brand of vacuum cleaner?

Posted
4 minutes ago, bobdisk said:

Yes.  Did you know that Hoover was a brand of vacuum cleaner?

And of washing machines. 

Hence why I Hoover my clothes. 

  • Haha 1
Posted
2 hours ago, bobdisk said:

Yes.  Did you know that Hoover was a brand of vacuum cleaner?

My parents never hoovered when I was a kid. They had an Electrolux, and vacuumed the carpets, the term I still use today. 'I'm just going to henry the bedroom' doesn't sit right, to me.

Posted
4 hours ago, Ghosty said:

Sunken cost fallacy

Is that the new album by The Fall?

Posted

Another sunrise and as always more to add to the life tapestry, a 1981 Ital which I didn't predict I'd be looking at upon the garden by any stretch of the imagination this week.

Huge thanks to the combined efforts of the Walgrave transport team for delivering it with consummate professionalism and for a perfectly good price, excellent work!

20210705_084026.thumb.jpg.19976283f4d27e5d99ebefe5dd5f21c8.jpg20210705_084902.thumb.jpg.0ce85c4bfb01e98cd014bed24d322319.jpg

I'm instantly at home in an AR product! 

Posted
13 hours ago, omegod said:

Not sure how to dispose of the 20-30 litres of contaminated fuel as the local tip won't take it, any ideas  ??????  

Mix with waste oil and turn into home made fence preservative? That’s what the guy at work who restores vintage motorcycles does

The number of household waste recycling places which do not take small quantities of car fluids is either increasing or are so few and far between that everyone on here is unlucky.

The smaller sites here in West Sussex don’t take oil/antifreeze/fuel but the major ones do - tip at your next town along might take it, your local county council should have a link to all household waste sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...