Jump to content

Six Cylinders Motoring Notes


Recommended Posts

Posted

Potentially counting myself in, as long as I don't have to work that weekend. 

Posted

I gave the Toledo a run out tonight to a local car show via Slowsilvers house to drop of my jump pack that is not taking a charge.

 37 trouble free miles including queueing traffic in warm weather. I opened the bonnet when I got to the field and everything looked good, but I wish I had a working temp gauge. 

IMG_20220713_161439 broad.jpg

IMG_20220713_190706 broad.jpg

IMG_20220713_175944 broad.jpg

Posted

Unfortunately I can't come that weekend as I have to go to a wedding.  

  • Sad 2
Posted
12 minutes ago, catsinthewelder said:

Unfortunately I can't come that weekend as I have to go to a wedding.  

Going to north wales that weekend too I think, parents wedding anniversary and I need to sort out tyres for the x1/9 and service for the new fiat.

  • Sad 1
Posted

Same weekend as 2CV registers day which we had planned to go to… 

  • Sad 2
Posted

If you're very lucky, I might be able to find my Erik Carlsson rally-spec die-cast model. Don't get your hopes up, mind.

  • Like 1
Posted

Hope to come that weekend!    @Six-cylinder Where is the Saab? Do you have transport for the Saab available? PM if you like.

  • Thanks 1
Posted
9 hours ago, brownnova said:

Same weekend as 2CV registers day which we had planned to go to… 

Arsebiscuits!  So it is...

  • Sad 1
Posted
1 hour ago, chaseracer said:

Arsebiscuits!  So it is...

calverton worcester - short drive from washington cannock and or bucks /film nerd

Posted

Yesterday evening @Talbot tried to resuscitate the patient, my shitefest bound Peugeot 306. Unfortunately because of a large leak, established with vacuum all I can do is drive it topless.

Talbot did not want to end the evening on 100% fail so 10.20pm decided to tackle the only other car on my drive with non working aircon, the Alfa 156. He had heard rumours that it used to work and did the vacuum test which it pasted so went on to regas it. It now blows cold air, so now he had a 50% success rate.

Now my aircon regas list is:

Citroen Xantia Activa

Chrysler Sebring

BMW 735iSE

Maserati BiTurbo

Cadillac Eldorado Touring Coupe

BMW 328i Msport E36

BMW 330Ci E46

Volvo V70

1985 Range Rover

Talbot may not have time to visit Shitefest 2022!

 

 

IMG_20220714_222700 broad.jpg

Posted
3 hours ago, Six-cylinder said:

Yesterday evening @Talbot tried to resuscitate the patient, my shitefest bound Peugeot 306. Unfortunately because of a large leak, established with vacuum all I can do is drive it topless.

Talbot did not want to end the evening on 100% fail so 10.20pm decided to tackle the only other car on my drive with non working aircon, the Alfa 156. He had heard rumours that it used to work and did the vacuum test which it pasted so went on to regas it. It now blows cold air, so now he had a 50% success rate.

Now my aircon regas list is:

Citroen Xantia Activa

Chrysler Sebring

BMW 735iSE

Maserati BiTurbo

Cadillac Eldorado Touring Coupe

BMW 328i Msport E36

BMW 330Ci E46

Volvo V70

1985 Range Rover

Talbot may not have time to visit Shitefest 2022!

 

flash bugga :P

 

Posted

I ordered new spark plug extensions for my Peugeot 504 from Germany they came in days with a packet of car shaped sweets!

Now my shiter friends I need help to identify the make, model, trim level, engine size and year!

There are 7 in the packet in different colours but look like the same car.

IMG_20220719_141614 broad.jpg

IMG_20220719_140449 broad.jpg

  • Like 3
Posted

Due to the low take up for SAAB DAY 13th August I thought I would move it to the 20th August, unfortunately Adrian who I bought it from is busy 20th.

My solution is to hold Saab Day both weekends!

That’s right FoD two consecutive weekends 13/14 AND 20/21 August.

 

This is my cunning plan:

I will buy a service kit in advance.

I will tax and insure the 95 ready for the 13th.

I will have the Saab transported to the FoD the week before the 13th August.

On the 13th we can start the recommission process.

On the 13th with can also go the Adrian’s house and collect any parts he has ready for us.

14th Aug Test drive the Saab in the field.

14th Aug polish it so it looks like new.

Assess what parts we need to make the car safe to use on the road.

Look out or buys spares needed.

Then for the 20th August

Carry out any repairs necessary to make the car road useable.

Load extra people in the boot to take advantage of the rear facing seats.

Collect Fish and Chips with the Saab 95.

 

Who’s in, either weekend or both!

IMG_20211118_145648 broad.jpg

  • Like 7
  • Six-cylinder changed the title to Six Cylinders Motoring Notes - Saab 95 event 13/14 Aug at FoD now also 20/21 Aug!
Posted

I am going to try and make one of them, but you know how sucessful* my planning has been this year!

  • Like 2
Posted

The Toledo got a run out this evening in all the heat and seemed to run better than ever.

IMG_20220719_191319 broad.jpg

Posted

I was hoping to make it one of the weekends in August but of course its school holidays and I can't. 

I hope to come one before long though, still!

Posted
On 3/29/2021 at 8:50 AM, Six-cylinder said:

NO, that 8.6HP

P1090056 broad.jpg

Old post, I know.

I must be doing something wrong. 24hp on my mower. 

20220720_132438.thumb.jpg.1a5ae2f2e9e71271a33a7401f7ec7235.jpg

725cc, just a smidge more than original Robin. Half the cylinders.

Would probably be quite sprightly as an on-road powerplant.

  • Like 2
Posted

I’ve just realised that you seem to be missing a stag in your collection of unreliable rusty British cars.

Posted
1 hour ago, richardmorris said:

I’ve just realised that you seem to be missing a stag in your collection of unreliable rusty British cars.

I used to have one.

P1210707 broad.jpg

  • Like 1
Posted
2 hours ago, PhilA said:

Old post, I know.

I must be doing something wrong. 24hp on my mower. 

20220720_132438.thumb.jpg.1a5ae2f2e9e71271a33a7401f7ec7235.jpg

725cc, just a smidge more than original Robin. Half the cylinders.

Would probably be quite sprightly as an on-road powerplant.

We are up to 13HP now.

IMG_20220122_085727 broad.jpg

  • Like 3
Posted

This is why I call them my favourite garage!

Somebody pointed out to me that there were a couple of small rust holes appearing on the underside of my Citroen DS after owning it for 13 years. I thought I had better book it in for a patch to be welded in. A poke about revealed it was far worse than a couple of patches needed. My favourite garage have repeatedly told me they do not do restorations.

There was a fair bit of negotiation needed with them saying in the end they needed the proper repair panels and if I could get them then they would do it. Making taking the job on dependent on panels was there undoing for getting out of the job, over a million DS were made and they have always been a popular car. In less than a week they were delivered from Germany.

I popped in to see them and was pleased to see before the panels arrived they had started to repair the sill under the passenger door. That’s when the abuse started, we needed to do it in case the car broke in half on our ramp etc!

I collected it all repaired today and I am oh so happy with what they have done and wish they would take on all my cars.

IMG_20220520_144339 broad.jpg

IMG_20220520_144407 broad.jpg

IMG_20220520_144444 broad.jpg

IMG_20220526_141125 broad.jpg

IMG_20220526_141131 broad.jpg

IMG_20220526_141915 broad.jpg

IMG_20220630_103041 broad.jpg

IMG_20220526_141120 broad.jpg

IMG_20220630_102222 broad.jpg

IMG_20220630_102244 broad.jpg

IMG_20220630_102914 broad.jpg

IMG_20220630_103004 broad.jpg

IMG_20220707_110739 broad.jpg

IMG_20220720_125427 broad.jpg

Posted

Maybe offer to partner with them in some way?

Posted
1 hour ago, Six-cylinder said:

This is why I call them my favourite garage!

Somebody pointed out to me that there were a couple of small rust holes appearing on the underside of my Citroen DS after owning it for 13 years. I thought I had better book it in for a patch to be welded in. A poke about revealed it was far worse than a couple of patches needed. My favourite garage have repeatedly told me they do not do restorations.

There was a fair bit of negotiation needed with them saying in the end they needed the proper repair panels and if I could get them then they would do it. Making taking the job on dependent on panels was there undoing for getting out of the job, over a million DS were made and they have always been a popular car. In less than a week they were delivered from Germany.

I popped in to see them and was pleased to see before the panels arrived they had started to repair the sill under the passenger door. That’s when the abuse started, we needed to do it in case the car broke in half on our ramp etc!

I collected it all repaired today and I am oh so happy with what they have done and wish they would take on all my cars.

IMG_20220520_144339 broad.jpg

IMG_20220520_144407 broad.jpg

IMG_20220520_144444 broad.jpg

IMG_20220526_141125 broad.jpg

IMG_20220526_141131 broad.jpg

IMG_20220526_141915 broad.jpg

IMG_20220630_103041 broad.jpg

IMG_20220526_141120 broad.jpg

IMG_20220630_102222 broad.jpg

IMG_20220630_102244 broad.jpg

IMG_20220630_102914 broad.jpg

IMG_20220630_103004 broad.jpg

IMG_20220707_110739 broad.jpg

IMG_20220720_125427 broad.jpg

More fool them. You may as well just offer to employ them all on paye.

Posted
On 7/19/2022 at 2:24 PM, Six-cylinder said:

I ordered new spark plug extensions for my Peugeot 504 from Germany they came in days with a packet of car shaped sweets!

Now my shiter friends I need help to identify the make, model, trim level, engine size and year!

There are 7 in the packet in different colours but look like the same car.

IMG_20220719_141614 broad.jpg

IMG_20220719_140449 broad.jpg

They are almost VW Beetle shaped

  • Like 1
Posted

Today @Slowsilverplaced his healing hands on the bonnet of my E36 and miraculously the bonnet opened.

What's strange about that you say, well the bonnet has been stuck closed for over a week and when we inspected it after it was open found the outer cable had come out of its clamp point and therefore the inner cable had nothing to pull against.

IMG_20220721_151629 broad.jpg

  • Like 4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...