Jump to content

The new news 24 thread


Recommended Posts

Posted

I'm guessing the local scrap dealer is rubbing his hands right now though

I believe fire damaged cars are pretty much worthless. The scrap is often too contaminated to be usefully recycled and a pain in the arse to deal with.

Posted

I wouldn't want to be anywhere near that car park at the moment. The amount of nasty stuff floating around in the air from the burnt cars and building fabric must be very large.

 

Also very impressive how the fire service managed to extinguish it completely.

Posted

Some apparently undamaged cars there. They'll have to be moved somehow, Shirley?

Posted

if it was a lhd rangey wont it be johnny foreigner who foots the insurance bill?

Posted

has land rover put a hybrid on sale yet?

 

if so then i hope its not a battery thing that has caused the fire.

Posted

See, I find that amusing. All this panic about the danger of li-ion batteries catching fire, yet we've had over a century of cars proving that electrics and a tank full of petrol aren't exactly a great idea. 

It was described as an 'old' Range Rover, so I'm guessing there's naff all li-ion about it.

Posted

The decision is made.

 

The Smart car and I are going to part company at the earliest opportunity.

 

I was in discussion with a shitter, but he has taken advice and the mhd (start/stop) fitted to this one is best avoided.

 

So, even though there is nothing wrong with this one (at the moment!) I shall probably bang it on ebay .

Posted

12 cars survived by my count, how you would get them out though is another matter ! 

Posted

New purchases to be collected tomorrow #excited!

Meanwhile, back at the ranch...

Old Doug the Digger needed some electrical boostage. Will he fire?attachicon.gif20180101_144542.jpg

Set the controls to the heart of the moon.

attachicon.gif20180101_144614.jpg

Ignition

attachicon.gif20180101_144705.jpg

 

Doug the digger has a double at the field of dreams!

  • Like 3
Posted

The pattern not matching between the fabric join really bugs me.

Maybe he's pulled his jacket on insides-out.

 

It is rather an unusual choice. Out of all of the jackets in all of the jacket shops, "I want that one".

 

Fair enough, and Happy New Year to you bud. It could be a really expensive one-off designer one for all I know.

 

Twenty/ten for couldn't-give-a-fuckness though. A bit like something Gram Parsons might have worn :-)

Posted

My kitchen now smells of rotten EP90 but on the brightside the engine is almost ready to come out my Bonnie. Just the rearsets to remove as they use the same bolts as the rear mounts & then the bottom mount.

 

I'd do more but not really in the mood so back to slacking on here & feeling bloody tired.

 

I was wrong, I need to take the chain off too. Not that I've done it.

Posted

Any idea what this is, a friend found it in his MGB, Pektron, they make electrical parts and relays but this has no obvious way to connect anything ??

post-4787-0-88136500-1514841387_thumb.jpg

post-4787-0-93798500-1514841397_thumb.jpg

post-4787-0-07679900-1514841408_thumb.jpg

Posted

Relay box with broken off circuit board? The circuit board may have had finger contacts for a connector.

Posted

Brown leather gloves completed the look. The fucker wouldn't stand still but you get the idea.5f1cdf978cfe4ed80fa48410c050ae35.jpg

 

Sent from my SM-G930F using Tapatalk

  • Like 2
Posted

Brown leather gloves completed the look. The fucker wouldn't stand still but you get the idea.5f1cdf978cfe4ed80fa48410c050ae35.jpg

 

Sent from my SM-G930F using Tapatalk

 

Elton John?

Posted

Brown leather gloves completed the look. The fucker wouldn't stand still but you get the idea.

Stop taking candid photos of me you twat!

Posted

Had a relatively unproductive day today.  Haven't got any further with attempting to diagnose the lumpy idle and lack of throttle response on the Audi, although I'm beginning to think they may be two separate issues.  I did notice that occasionally a stream of bubbles would come through the fuel line into the pump, but this didn't seem to have any effect on the idle, which was just as lumpy when the fuel was flowing "cleanly".  I'm wondering if I can bodge it temporarily by increasing the idle speed to 1,000 rpm, by which point the engine has smoothed out completely, but I'm not sure how you adjust the idle speed on these pumps.

 

I was going to replace the other rear wheel bearing on the silver Rover, but one of the drum retaining screws had seized in place.  When I went to get my drill to drill it out I was reminded that I'd broken my only 5mm drill bit, and being NYD there was nowhere open locally to buy another one, so that got postponed.

 

Next job was to carry out a preliminary investigation into the feasibility of removing the nearside front bottom wishbone on the 205 and replacing the knackered bush.  The front wishbone bolt and the clamp bolt which holds the wishbone to the hub both came undone quite easily, but the rear bolt didn't want to know.  This is of course the most awkward one to get to - it's impossible to get a socket on the nut as the anti-roll bar is in the way, and there's limited movement on the bolt side as the rack is in the way.  I don't want to start unbolting drop links and track rod ends as chances are I'd never get them to do up again.  I can turn the bolt a bit with a ratchet and socket, but the nut turns with it - the only way I can see to hold the nut in place is with a 16mm ring spanner.  I know I had one of those as I bought it to get the front calipers off the Volvo years ago, but I can't find it anywhere now.  So that job didn't get any further either.

 

Then I found that my folding bike had gained a puncture in the front wheel, so I had to get that repaired as I need the bike for work in the morning.  I've just been out and put it all back together - took a torch with me but the moon was so bright I didn't need it, so put the bike together by moonlight, which was novel.

Posted

Some apparently undamaged cars there. They'll have to be moved somehow, Shirley?

I see one of the cars on roof had a couple of dogs in that seem to have survived ok. Surprising but good stuff!

Posted

Repaired SVX has broken again. 

Swearing. 

Posted

Luckily no one died. And in the end this is what we have insurance for.

Posted

Shame she missed.

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...