LightBulbFun Posted August 6, 2021 Posted August 6, 2021 2 hours ago, dean36014 said: As a matter of interest is the CF going to be sold on? I bloody well hope not! its genuinely one of my favourite of the bunch plus its got a solid bed, so its perfect for transporting 3 wheelers *ahem* although @Mrs6C you might want to keep @Six-cylinder away from it, especially if he starts brandishing an angle grinder as he was threatening to remove the centre portion of the ramp for "weight saving reasons".....
beko1987 Posted August 6, 2021 Posted August 6, 2021 18 minutes ago, Talbot said: I may have to look at bringing the 2kw inverter up then. Run the generator to keep the batteries charged, but run the vac from the batteries through the inverter. Much kinder on the motor windings. Not sure I want to put my 48 hour old new toy through mouse poo, but I can bring some cleaners I don't really care about along to run off the generator if you have a bigger one? Chris's one tried but you can tell the motors are running slow! I've got some Einhell cheap shitty things I picked up a few years ago that I've done nothing with, will get one/both working and if they burn up halfway through the day we can keep warm with them!
LightBulbFun Posted August 6, 2021 Posted August 6, 2021 3 minutes ago, beko1987 said: Not sure I want to put my 48 hour old new toy through mouse poo, but I can bring some cleaners I don't really care about along to run off the generator if you have a bigger one? Chris's one tried but you can tell the motors are running slow! I've got some Einhell cheap shitty things I picked up a few years ago that I've done nothing with, will get one/both working and if they burn up halfway through the day we can keep warm with them! I think what @Talbot is saying is he has a mains inverter with a bit more grunt then the generator which you can run your 240V vacuum cleaners off of and then when the batteries powering the mains inverter go flat, they can be charged by the generator (or I guess more kept topped up by the generator) beko1987 1
beko1987 Posted August 6, 2021 Posted August 6, 2021 4 minutes ago, LightBulbFun said: I think what @Talbot is saying is he has a mains inverter with a bit more grunt then the generator which you can run your 240V vacuum cleaners off of and then when the batteries powering the mains inverter go flat, they can be charged by the generator (or I guess more kept topped up by the generator) Ah that does make alot more sense than I read it in my head! I think the vacs are fairly low wattage too so that could work very well tbh LightBulbFun 1
Sir Chocolate Teapot Posted August 6, 2021 Posted August 6, 2021 Just WOW. Oh to have a field and time. LightBulbFun 1
sutty2006 Posted August 6, 2021 Posted August 6, 2021 6cylinder is living my dream right there. Six-cylinder, LightBulbFun and HMC 3
High Jetter Posted August 6, 2021 Posted August 6, 2021 10 hours ago, Six-cylinder said: I was only able to buy the 1976 Manta 1.9 Auto coupe that Mrs6C wanted if I bought all 8 cars. I bet you were fuming when you found that out! What a Vaux-haul! Absolutely well done Sir, wish I was nearer to come and drool over them assist. Six-cylinder 1
sutty2006 Posted August 6, 2021 Posted August 6, 2021 I think we should do one of those “will it start?” Videos on at least all of those treasures. Be very entertaining. Six-cylinder, LightBulbFun and Dick Cheeseburger 3
LightBulbFun Posted August 6, 2021 Posted August 6, 2021 4 minutes ago, sutty2006 said: I think we should do one of those “will it start?” Videos on at least all of those treasures. Be very entertaining. if @dollywobbler can make it, I imagine it would be good content for his youtube channel going by how well the video on @Saabnut's green goddess has done sutty2006 1
sutty2006 Posted August 6, 2021 Posted August 6, 2021 I’ve got a horrible feeling I’m on shift for the open weekend . 😢
richardmorris Posted August 6, 2021 Posted August 6, 2021 Will like to come up and maybe stay in a tent. chaseracer 1
AnthonyG Posted August 6, 2021 Posted August 6, 2021 Bloody hell! Were all these related to the deceased gentleman who owned the ‘93 Carlton? The yellow Cavalier is my favourite, albeit the ‘87 Carlton looks like the one most likely to work.
sutty2006 Posted August 6, 2021 Posted August 6, 2021 He was a serial Vauxhall botherer. And I personally know he saved all of these so they could be saved from the scrapper. Im a manta guy at heart, but I do like that mk1 cavalier! Snake Charmer, Shite Ron, Floatylight and 3 others 6
richardmorris Posted August 6, 2021 Posted August 6, 2021 6 hours ago, sutty2006 said: 6cylinder is living my dream right there. Doesn’t he live everyone’s dream?
brownnova Posted August 6, 2021 Posted August 6, 2021 Crivens! What an awesome haul… very much looking forward to seeing these! LightBulbFun 1
Six-cylinder Posted August 7, 2021 Author Posted August 7, 2021 Not so good from the other side, what have I done! RichardK, Dick Cheeseburger, Shite Ron and 1 other 4
Mrs6C Posted August 7, 2021 Posted August 7, 2021 38 minutes ago, Six-cylinder said: Not so good from the other side, what have I done! I love it! The missing door is in the back of one of the other cars, so a useful group activity at the next FoD could be refitting it? That and a good clean inside and out would see this old workhorse looking much better. Coprolalia, chaseracer, LightBulbFun and 1 other 4
catsinthewelder Posted August 7, 2021 Posted August 7, 2021 Excellent haul there, would you like me to bring my petrol pressure washer? Might even convince the girlfriend to come with that many Vauxhall's about 🤣 Mrs6C 1
Six-cylinder Posted August 7, 2021 Author Posted August 7, 2021 59 minutes ago, catsinthewelder said: Excellent haul there, would you like me to bring my petrol pressure washer? Might even convince the girlfriend to come with that many Vauxhall's about 🤣 Yes please. We have lots of Vauxhall brochures to give away courtesy of @RichardK I guess I should bring the working Carlton estate to the FoD as it was from the same home. LightBulbFun, catsinthewelder and RichardK 3
HMC Posted August 7, 2021 Posted August 7, 2021 That recovery truck number plate looks to be 100% verified original Patinated serck.
Six-cylinder Posted August 7, 2021 Author Posted August 7, 2021 DVee8, LightBulbFun, Coprolalia and 1 other 4
Six-cylinder Posted August 7, 2021 Author Posted August 7, 2021 Dyslexic Viking, LightBulbFun, Dick Cheeseburger and 2 others 5
Six-cylinder Posted August 7, 2021 Author Posted August 7, 2021 15 minutes ago, 3VOM said: Should I bring this? Thanks, I think we have one from fixing the Carlton estate 2.0i Club. This is the worst bit on the Carlton from rough handling in storage. Shite Ron and brownnova 2
beko1987 Posted August 7, 2021 Posted August 7, 2021 One working cleaner sorted, of zero value to me, the random dyson tools it has with it are more valuable, and their worthless too! Ready to suck up shit, piss, rust, oil or whatever comes it's way! @Talbot will your kit run it? It's a bit more powerful than I thought but equally it's a fucking cheap shitty motor in it so I imagine these stats are a lie I do also have 2...although the 2nd has no tools, no hose and does have a waft of carbon about it which might be the motor not having long left (although it runs OK) or that it was full of soot with the wrong filter fitted... If anyone wants it to do anything with for £0 shout and I'll bring it along! Can bring another cleaner if needed but we'd be at 2000w then which may be pushing it a bit for a generator... And I'd care more about said other cleaner than this one!
beko1987 Posted August 7, 2021 Posted August 7, 2021 14 minutes ago, Six-cylinder said: Thanks, I think we have one from fixing the Carlton estate 2.0i Club. This is the worst bit on the Carlton from rough handling in storage. Looks like its had a kick or 2... Would taking the door cards off and giving it a similar kick from inside the panel get 83% of that out? Mrs6C and Six-cylinder 2
3VOM Posted August 7, 2021 Posted August 7, 2021 7 minutes ago, beko1987 said: Looks like its had a kick or 2... Would taking the door cards off and giving it a similar kick from inside the panel get 83% of that out? Depends how bothered 6C is with the amount of work needed v quality of finish. Both those dents look bastards to get out completely, and the back one needs like a double pull, IMHO. What bodywork tools, heat gun etc. are available?
sutty2006 Posted August 7, 2021 Posted August 7, 2021 Is there running water on site at the FoD? I’m considering begging my boss for that weekend off, highly unlikely. But if I can, I’ll bring my caravan with working fridge for beers etc. Snake Charmer, Six-cylinder and Mrs6C 3
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now