Jump to content

Autoshite's official for sale/wanted thread


Recommended Posts

Posted

I need to make some room in the garage (outer north London). 

Carlton A estate rear quarter glasses, brown tint:
post-3844-0-07949000-1516448082_thumb.jpg

Merc wheel trims needing paint (googling says 190E 15"?):
post-3844-0-49922500-1516448354_thumb.jpg

BMW E30 drivers door - some minor surface rust at the back of the rubbing strip:
post-3844-0-78538600-1516448606_thumb.jpg

XJ40 front valance/spoiler:
post-3844-0-88207400-1516448724_thumb.jpg

Fiat Argenta (?) washer bottle with pump:
post-3844-0-43818500-1516448890_thumb.jpg

Vauxhall Senator A rear lights, Argenta rear light (some surface cracks) & an Alfa 164 electric mirror (chopped wiring), Princess passenger front indicator:
post-3844-0-11106000-1516448980_thumb.jpg

Dolly passenger front door card:
post-3844-0-57735800-1516449104_thumb.jpg

Skoda Estelle sunroof:
post-3844-0-46035200-1516449263_thumb.jpg

Mercedes W114/115 grille. (some rot under the bottom)
post-3844-0-78877400-1516449350_thumb.jpg

S1 XJ Daimler grille (not mint mint):

post-3844-0-61460900-1516449457_thumb.jpg

Mercedes W114/115 bootlid (minor, easily repairable surface rust under the bottom lip, no handle now):
post-3844-0-54005300-1516449521_thumb.jpg

Offers.

More will follow at some point..

Posted

All free to good home, or bad home for that matter, I'll post at cost. Manuals might be £3, thinner things if they go large letter about £1.50. pay with Paypal.post-7547-0-11383300-1516460755_thumb.jpg

73 pages, black and white on unglossy paper, probably didn't trouble the best sellers lists but some fine old shit in it and it's fairly clean. Large letter and now gone.

post-7547-0-69837700-1516460955_thumb.jpg

Early thinner soft cover version of Vizards a series bible but still with gratuitous photo of his missus

post-7547-0-26583700-1516461142_thumb.jpg

post-7547-0-63126300-1516461336_thumb.jpg

MGB manual, but not as much as previous publication.

Stains on some pages, its only oil.

post-7547-0-85941500-1516461637_thumb.jpg

Very battered XS 650 manual. Much used, I got through 2 of these bikes over the years and though OK never found them to be any less trouble prone than our twins. Very well produced, puts Haynes to shame.post-7547-0-38684900-1516461956_thumb.jpg

Finally, will no one rid me of this poxy saw? Now my local scrapper has gone I can't give the bastard thing away despite it being full of life, well it jumps about like it is. 2 spare blades.

Posted

Anyone close to Twyford near Reading who is able to collect a set of VW Beetle brake drums and move them north for me?

Posted

Anyone close to Twyford near Reading who is able to collect a set of VW Beetle brake drums and move them north for me?

Yes mate I am if you want to PM me... I am in Reading,

 

Cheers

Posted

 

Finally, will no one rid me of this poxy saw? Now my local scrapper has gone I can't give the bastard thing away despite it being full of life, well it jumps about like it is. 2 spare blades.

Possibly, where am you?
Posted

He looks well :-D

I think he looks younger now than he did in 1979! See what driving a Maxi does for you. :)

 

keef i'll get round to posting book soon!

Much appreciated.
Posted

Early thinner soft cover version of Vizards a series bible

 

Yes please.

 

Might even collect the saw, depending on where it is. ;)

Posted

Possibly, where am you?

Indeed; where for art thou?

Posted

Indeed; where for art thou?

Down the shed.

 

 

 

 

( I am aware this is incorrect, according to Shakespeare's law*)

  • Like 1
Posted

Having meandered back through the thread Cros(and more importantly the saw of brokenness) is apparently located near Bourne, and presumably somewhere near Peterborough as well. It is therefore fecking miles away from me. Bums.

 

Edited for pie people aversion.

Posted

∆∆∆ Here's my address so you can pop round and nick my Morris while I'm asleep- keys under the drivers mat, dont give it too much choke, mind the pothole on the way out of my road.

  • Like 1
Posted

Attention to the 2cv lickers on here ( other shite cars are available!). Years ago I had a couple of 2cvs ( when they were cheap and sold them just before they ballooned in price!) and was a member of the club. Found a couple of 2cvGB mags. Dated May and June 2008. One not so careful owner (me) so are in a slightly foxed condition. Not rust or coffee stains, pages are not stuck together ( sign of a misfire?! - I'm sure I would have noticed as they are only 2 cylinder!). Any way the current millstone says get rid of this crap so they are up for grabs. Free of charge just pm your address. May split.

 

post-5584-0-87289100-1516523437_thumb.jpeg

Posted

WANTED: Has anyone got or know of a single phase tyre changer/machine going cheapish?

 

A mate and I are both utterly hacked off with being bent over to have motorcycle tyres changed - motorcycle tyres arent dear, but places seem to charge through the nose for fitment, the local bloke who isnt too expensive is a pain in the arse being unreliable. We've done it manually and already have weights, air, a balancer  even a manual bead breaker etc, but really want a semi auto/full auto machine. At the moment we are seriously considering buying a machine new (the one we are looking at is £650ish), used stuff on ebay seems to go for top money.

 

If anyone knows of one for sale for sensible money in working order dansarf or in whales please reply or pm me.

 

Ta

Posted

If you're remotely handy with wiring get a 3 phase one and fit an inverter to it.

Posted

If you're remotely handy with wiring get a 3 phase one and fit an inverter to it.

even 3 phase changers are decent money. if i have to go down that route, rather than using a 1ph-3ph converter, id put a single phase motor in it.

 

Really want 1ph, 12v or all-air though.

Posted

Would anyone be interested in an old mower?

 

I have an old Mountfield petrol lawn mower I was given that needs a new pull cord and a bit of fettling to get running. Its sat in my shed for a further two years, one of the bolt heads has rounded to get the pull starter housing off but once this is sorted and a new pull cord fitted it should run. 

I'm in Leicester, I am moving house and having a clear out

Posted

Would anyone be interested in an old mower?

 

I have an old Mountfield petrol lawn mower I was given that needs a new pull cord and a bit of fettling to get running. Its sat in my shed for a further two years, one of the bolt heads has rounded to get the pull starter housing off but once this is sorted and a new pull cord fitted it should run. 

 

I'm in Leicester, I am moving house and having a clear out

Message Stanky, he is the mower pervert on here :-) 

  • Like 3
Posted

Would anyone be interested in an old mower?

 

I have an old Mountfield petrol lawn mower I was given that needs a new pull cord and a bit of fettling to get running. Its sat in my shed for a further two years, one of the bolt heads has rounded to get the pull starter housing off but once this is sorted and a new pull cord fitted it should run. 

 

I'm in Leicester, I am moving house and having a clear out

 

Yes! Me! *puts hand up* Over here! Me!

 

Yep, would be very interested, I'll PM you. Anyone able to shiteley it down nearer to the south coast please give me a shout.

  • Like 2
Posted

All free to good home, or bad home for that matter,

Finally, will no one rid me of this poxy saw? Now my local scrapper has gone I can't give the bastard thing away despite it being full of life, well it jumps about like it is. 2 spare blades.

If that is still up for grabs I'd be very happy to give it a home!

Posted

Just turned out another Jerry can. It's a German one with 1969 stamped on the side, fairly sure it came with my Munga, date would be about right.post-7547-0-26886600-1516796238_thumb.jpg. STILL AVAILABLE

 

 

Very smart old parts lists rebound by Morris Minder centre a few years back. None of my usual grubby paw marks all over it neither, about 3£ posted at a guess.

Still available.

Very nice fat thing includes potted history an' tings.

Haynes triumph twins, usuable but tatty.

Armstrong Squiddly road Tests annual, minty condition, includes tests of both models of small 'Sapphires'. Buggeration, they're awful looking. It goes without saying I'd have one. Now gone.

All free, collect or pay for Mr Royal Mail to stash it in his pigeon hole for a week or two. South lincs.

post-7547-0-04792900-1516797298_thumb.jpgpost-7547-0-35256000-1516797557_thumb.jpg

post-7547-0-00661400-1516796262_thumb.jpg

Posted

^^^^ Cros is an A1 seller, massive thanks for the sprayer and last jerry.

Thanks very mych

 

 +1, and cheers for the ambulance book!

Posted

 Any interest in a Citroen Saxo. FY53ZWK.£250, get you home tax, mot till 20th April.

Brakes need bleeding (don't inspire much confidence), front of drivers side wing dented, airbag light on, scrapes on corners. Knocks from near side wheel on full lock.

New exhaust, new shoes and pads.

Cheap insurance. 

Car in Liverpool.

Posted

Wanted mk3 cortina saloon roof will remove myself pref in yorkshire/Nottinghamshire/Lincolnshire area.

Posted

Wanted possibly: wheels/tyres to fit Volvo 740. My 14" alloys need refurbishing and I need something else to run it on for a bit.

 

Might be able to make do with 2.

 

Sorted for now.

Posted

Wanted possibly: wheels/tyres to fit Volvo 740. My 14" alloys need refurbishing and I need something else to run it on for a bit.

 

Might be able to make do with 2.

 

PM'd you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...