For Sale Autoshites *official* WANTED/OFFERED thread...

[ruffgeezer]

  On 02/01/2017 at 20:31, Kiltox said:

If anyone wants a job lot of my workshop gear I can arrange delivery

Can you pm me more details of the diagnosis stuff plus. What versions and how recently updated etc.

[Jikovron]

Im looking to aquire a simpering 1.9 xud turbo engine, can collect easily enough and also can afford to pay reasonable engine money whatever that may be, the hope is to get it fitted to the car featured in the thumbnail picture on the left and ravage <2500litres of veg oil.

I had a look on ebay, however the predominant feel is that engines are quite pricey longblocks, DW8 none turbo or can only be bought in individual pieces like a build your own xud magazine

Many thanks

[Kiltox]

  On 03/01/2017 at 13:07, ruffgeezer said:

Can you pm me more details of the diagnosis stuff plus. What versions and how recently updated etc.

I don't have that information to hand (laptop is at my unit) but will get it for you over the next couple of days. It's all Chinese knock off

[panhard65]

I have sold this pos today so it is no longer available

 

Citroen Synergie 1.9 turbo diesel. Runs and drives but no mot and I have swapped a lot of bits over onto my 806 but the old parts are supplied if you wanted to fix it back up. Needs at least front pads and a cv gaiter for mot £75. Located in Somerset and should drive to a pre booked mot easily.

Front fogs have gone now though and it needs the pasenger seat and mirror bolted back in.

[Station]

Mgf mats for sale - £25

My ex bought these from Rover/Mazda for her mgf. Hardly used, the pile is like new. Embroidered MG logo etc

[bangernomics]

  On 04/01/2017 at 11:50, panhard65 said:

Citroen Synergie 1.9 turbo diesel. Runs and drives but no mot and I have swapped a lot of bits over onto my 806 but the old parts are supplied if you wanted to fix it back up. Needs at least front pads and a cv gaiter for mot £75. Located in Somerset and should drive to a pre booked mot easily.

ebay 647.jpg

Front fogs have gone now though and it needs the pasenger seat and mirror bolted back in.

Didn't someone want a 1.9 xud turbo?

[Jikovron]

I do but im abit of a lightweight in only wanting to buy a severed xud engine due to a total lack of car space and abit of stress weakening my normal resolve, i can do the required deed in coaxing one out however to move away from the feebleness of my reasoning

[Six-cylinder]

All I need is a washer Jet!

 

Can anybody help me with a washer jet nozzle for a MK1 Metro? Unipart GWW834

[Station]

Hey, it's a free XUD.

 

http://retrorides.proboards.com/thread/183877/2000-renault-kangoo-free-bedfordshire

[Station]

WER R U Mr Kiltox?

[Kiltox]

Cheltenham

[bangernomics]

  On 04/01/2017 at 22:03, Station said:

Hey, it's a free XUD.

 

http://retrorides.proboards.com/thread/183877/2000-renault-kangoo-free-bedfordshire

That looks ok for free-150, are they HGF candidates usually?

[panhard65]

  On 04/01/2017 at 22:14, jamiewilson said:

That looks ok for free-150, are they HGF candidates usually?

Renault don't use PSA group engines it is their own engine and not as good

[Station]

Oops I thought it was a Citroen

[Supernaut]

  On 04/01/2017 at 11:50, panhard65 said:

Citroen Synergie 1.9 turbo diesel. Runs and drives but no mot and I have swapped a lot of bits over onto my 806 but the old parts are supplied if you wanted to fix it back up. Needs at least front pads and a cv gaiter for mot £75. Located in Somerset and should drive to a pre booked mot easily.

ebay 647.jpg

Front fogs have gone now though and it needs the pasenger seat and mirror bolted back in.

Oooooooh. Somerset's FUCKING MILES AWAY though.

[Six-cylinder]

Anybody got a usable MK1 Metro rad for sale?

[Six-cylinder]

  On 02/01/2017 at 20:28, Kiltox said:

Shite tool chest that has been badly spray painted yellow on the top box with overspray on the bottom - £25

I keep thinking this would be useful in my garage, it's just when I will pass your way again, April is the next booked at the moment.

[Kiltox]

I have another distant shiter (not as far away) with similar interest in it - need it gone by the end of March really but I don't know how firm that is yet.

[Six-cylinder]

Is it promised? If not maybe I should just make a special trip Google says 56 miles so in the C15 van that's £13.56.

[Kiltox]

Nope. First come first served on everything.

 

Buy more to make the fuel costs worth it

[Station]

2006 Ford Focus Estate TDCi (or whatever the diesel is). It was MOT'd about three weeks ago or so.

It's silver and in pretty good condition overall.

 

Looks like this:

 

 

£650.

[Uncle Jimmy]

Wanted- Saab V4 parts. Lots of bits needed for my project.

[sheffcortinacentre]

Got a frt wheel bearing to fit the (65-77) 95/96,

Rear wheel bearing to fit (65-77) 96 only

 

£5 each plus p&p

[Uncle Jimmy]

Gunson timing light, £12 delivered or £8 collected, works as it should, used it recently on the Ovlov and Sarb got 2 so ones gotta go.

[Station]

Ford Fiesta mk5 (?) wheel trims - £15

Four of.

For each wheel.

 

 

 

[AlabamaShrimp]

This lovely Samsung washer, model number in picture 3 years old and the motor has fallen off its bracket making the belt come off.

As far as I know it's a new bracket to make it work again.

Knowhow said they can get the bit bit no idea when so it must be available and Tbh all Samsung seem to have the same case. Anyway it's in Wakefield and cheap, make me an offer.

 

 

[Coprolalia]

Hey Kiltox,

I'm interested in the tool chest and potentially the engine crane and stand. Does it fold?

[Kiltox]

The engine crane folds yes. Stand is one piece but you could probably unbolt bits of it

[Broadsword]

This may be a long-shot but I'll give it a go.. To any of you out there who are into serious go karting at club level. Our family has retired from the sport and all our kit is for sale. Not exactly autoshite, it is in fact serious kit. So without further prattling on, the following are for sale:

 

2016 Tony Kart Racer 401 complete MSA legal kart with IAME X30 Junior engine

Unipro 6003 big kit

Kart stand

Large selection of spares including a front bumper, wheels, tyres, chains sprockets etc etc..

A few seats to cater for different sizes of driver

 

Basically everything you need to go racing we have. The kart is only 5 races old and is still straight. No welds or cracks to be seen. The engine was bought brand new. It has 4-5 hours running on it.

 

There is quite a lot up for grabs. If anyone is interested, PM me for details.

[robthedonkey]

  On 04/01/2017 at 21:15, Six-cylinder said:

All I need is a washer Jet!

 

Can anybody help me with a washer jet nozzle for a MK1 Metro? Unipart GWW834

Also search ldvs convoy

 

Sent from my ONEPLUS A3003 using Tapatalk