Weird Car’s weird cars! ‘ROCK DOWN TO ELECTRA AVENUE’ ‘HISTORY LESSON’

[LightBulbFun]

22 minutes ago, Weird Car said:

but the engine doesn’t feel as torquey as I was expecting,

I wonder how much the engine might benefit from a general tune up, I mean given its clearly previously fallen on hard times for quite some time, I have to wonder when was the last time someone actually gave the engine/carbs some proper TLC a proper tune?

take it to @richykitchy for a bit of rolling-road fun  

 

 

[N Dentressangle]

46 minutes ago, LightBulbFun said:

I wonder how much the engine might benefit from a general tune up, I mean given its clearly previously fallen on hard times for quite some time, I have to wonder when was the last time someone actually gave the engine/carbs some proper TLC a proper tune?

take it to @richykitchy for a bit of rolling-road fun  

 

 

Agreed.

My RRC shifts OK with a 2t weight and 189bhp (yeah, right) V8, so you should be able to get her to pick up her skirts.

[lesapandre]

I would join the Roll Royce Enthusiasts Club - they are very helpful and run maintenance courses and the like:

https://rrec.org.uk/join-today

[ETCHY]

5 hours ago, Weird Car said:

Some quick pics of the Shad as promised, Mr WC already wants to take it out in Convoy with the Guy Arab when that’s back on the road so expect some Rolls and Bus action soon, I also took it to work this morning and managed to attract a crowd almost instantly mainly from my colleagues who were probably wondering if the CEO of First Bus had just showed up for a random Audit 😆

I’d like to give it a really good wash and detail very soon as it got absolutely filthy from the drive home yesterday 

The best Shadow dashboard type imo, looks sooo impressive with that cool centre console.

I've never driven one (sadly) but even with the weight it's got to pull I reckon it should be able to get a shift on. Contemporary road tests don't show it as being a hot-rod but don't give the impression of it being sluggish either, so it maybe needs a bit of work.

It's cooler than Polar Bear piss. I like the number plates too.

[artdjones]

It might be worth topping up the carburettor dashpots with some 20/50, as they are what provide the mixture enrichment when the accelerator is given a poke.

The equivalent of the accelerator pump on a fixed jet carb.

Top up to within ½" of the top of the hollow piston rod 

[83C]

Bear in mind that the L-series might be enormous, but it really isn’t very powerful in N/A form. It should be ‘adequate’ - what that meant in reality was somewhere around 200bhp in a very lazy state of tune, and that in a car that is very heavy and lumbered with a 3-speed auto. 

As others have said though, worth giving it some love. Filters, spark plugs, check the dashpots, usual stuff.

Glad you got in there before I did though, I would have been very tempted!

[Zelandeth]

3 hours ago, artdjones said:

It might be worth topping up the carburettor dashpots with some 20/50, as they are what provide the mixture enrichment when the accelerator is given a poke.

The equivalent of the accelerator pump on a fixed jet carb.

Top up to within ½" of the top of the hollow piston rod 

This, and make sure the carbs are synced properly, as if one is opening significantly earlier or further than the other it will vastly reduce the available power and make the engine feel far more flat.  Doing that on my Rover made a night and day difference.

These aren't massively powerful engines for their size as they just weren't tuned that way, and are very under stressed.  Nevertheless they should have plenty of torque to be more than capable of making the car pick up it's heels and get a shift on more quickly than you might expect just looking at the raw figures.  If everything is working properly it definitely shouldn't feel like you're lacking power.

[rainagain]

On 25/01/2024 at 21:55, Sigmund Fraud said:

I think you only got an external boot lock if your 206 had no remote central locking - which was only the case with the poverty-spec version of the pre-facelift model. I don't think I've ever seen one of those in the metal.

I had a T reg 206 ‘L’ that didn’t have central locking, it had a boot lock. One of the first things I did to it was fit an eBay special central locking kit. It did have a bsi though as I had problems with the indicators and found there was no indicator relay to check, it was all in the body computer. 

[HMC]

5 hours ago, 83C said:

Bear in mind that the L-series might be enormous, but it really isn’t very powerful in N/A form. It should be ‘adequate’ - what that meant in reality was somewhere around 200bhp in a very lazy state of tune, and that in a car that is very heavy and lumbered with a 3-speed auto. 

As others have said though, worth giving it some love. Filters, spark plugs, check the dashpots, usual stuff.

Glad you got in there before I did though, I would have been very tempted!

Must admit, i thought it went ok- 0-60 is supposed to be about 11 secs from contemporary road tests and it didn’t feel much off that. IIRC i put a set of plugs with the spares, i was so blown away by the plug lead change i didn’t bother with them at the time.

[Weird Car]

So operation tidy the Rolie Polie has started, first with these new plates, not a huge thing but I was growing increasingly annoyed with how faded the old ones were, not slagging off HMC at all as they still looked infinitely better than the black and silver ones but I still couldn’t stand the faded look 

 

I got them from here if anyone’s interested, https://www.classicplatesonline.co.uk/plates.asp?gad_source=1  

they do great repro plates, they even do repros of the original raised digit plates but at 120 odd pounds I couldn’t justify it at the moment so these pressed plates will have to do, next port of call is to give it a really good detail and polish as looking at the paint whilst it’s not the best finish it should come up really good, that’s tomorrows job 

[Weird Car]

Not a great start to the day, went out to the cars this morning to see that some little scrote has taken my silver lady, only a matter of time I suppose being in a public car park, still really pissed me off, any suggestions on where to get another one cheap ?

[Surface Rust]

That's a crying shame. Probably no point putting another genuine one whilst it might happen again.

This would probably fool most peasants as you sweep past majestically 

 

https://www.etsy.com/uk/listing/253564741/winged-goddess-flying-lady-nymphmascot?ref=share_v4_lx

[Weird Car]

23 minutes ago, Surface Rust said:

That's a crying shame. Probably no point putting another genuine one whilst it might happen again.

This would probably fool most peasants as you sweep past majestically 

 

https://www.etsy.com/uk/listing/253564741/winged-goddess-flying-lady-nymphmascot?ref=share_v4_lx

Thanks, I’m definitely going to better off getting a fake one as they’re just gonna steal it again anyway. It’s really annoying that it’s too big to fit in my garage

[N Dentressangle]

1 hour ago, Weird Car said:

Not a great start to the day, went out to the cars this morning to see that some little scrote has taken my silver lady, only a matter of time I suppose being in a public car park, still really pissed me off, any suggestions on where to get another one cheap ?

What a shitty thing to do.

Hope the Karma Police give them a good lesson on how to use the station stairs

[N Dentressangle]

How about this fake one, base removed obvs:

https://www.ebay.co.uk/itm/166678939821?itmmeta=01HVBEGX4C2031CPBQCMNKVFA1&hash=item26ced6c8ad:g:MHMAAOSwCc1lHx2I

or find someone who'll 3D print you one:

https://cults3d.com/en/3d-model/art/spirit-of-ecstasy-flying-lady-rolls-royce

 

[Surface Rust]

25 minutes ago, N Dentressangle said:

How about this fake one, base removed obvs:

https://www.ebay.co.uk/itm/166678939821?itmmeta=01HVBEGX4C2031CPBQCMNKVFA1&hash=item26ced6c8ad:g:MHMAAOSwCc1lHx2I

or find someone who'll 3D print you one:

https://cults3d.com/en/3d-model/art/spirit-of-ecstasy-flying-lady-rolls-royce

 

That's much better than the Etsy effort!

Not sure how these attach, but maybe worth having a captive screw thread in the rad so you can take it off easily when parked.

[Weird Car]

52 minutes ago, N Dentressangle said:

How about this fake one, base removed obvs:

https://www.ebay.co.uk/itm/166678939821?itmmeta=01HVBEGX4C2031CPBQCMNKVFA1&hash=item26ced6c8ad:g:MHMAAOSwCc1lHx2I

or find someone who'll 3D print you one:

https://cults3d.com/en/3d-model/art/spirit-of-ecstasy-flying-lady-rolls-royce

 

Shame that replica is sold already, I’ve asked a friend if they can 3d print me one using that other link so fingers crossed. I’d still like a real one as well though just to know I’ve got one, I’ve found a few on eBay around the 100 mark so I’ll probably bite the bullet and get one of those too 

[egg]

6 hours ago, Weird Car said:

Shame that replica is sold already,

the one on ebay appears to have been re-listed now.

[Christine]

There's a big one  on a pedestal  in Lewis  fleamarket ... really big !  It was £450 !  Must be ex dealership

[ETCHY]

23 hours ago, Weird Car said:

Not a great start to the day, went out to the cars this morning to see that some little scrote has taken my silver lady, only a matter of time I suppose being in a public car park, still really pissed me off, any suggestions on where to get another one cheap ?

Ffs why are people like that, fucking robbing bastards.

[808 Estate]

I would be inclined to replace it with something different.

https://www.etsy.com/uk/listing/271628426/middle-finger-fk-you-flip-off-ratrod

[kevins]

wire a new one to an electric fence pack!

[SilverMachine]

On 13/04/2024 at 09:34, Weird Car said:

Not a great start to the day, went out to the cars this morning to see that some little scrote has taken my silver lady, only a matter of time I suppose being in a public car park, still really pissed me off, any suggestions on where to get another one cheap ?

as daft and obvious as it seems, check the local fb selling, ask in cash converters, local search on ebay. you might find yours and get a lead to whom may have taken it.

[lesapandre]

How did they get it off?!

I thought they were really firmly attached underneath?

Cut it? Lucky no damage?

Really 'old money' folk take the mascots off anyway and put their own on.

'Old Bill' was popular with military types. Thought valuable now.

Find something cheap and cheerful of your own to put back?

If you are leaving it out I'd remove the hubcaps too. 

Sorry to hear about this. Total idiots.

The market for these nicked RR badges has to be miniscule - bet it turns up somewhere.

[rainagain]

These guys will sort you out, must be good, it’s the one the royal family use.

https://louislejeune.com
 

Might be a bit pricey though! 

[Weird Car]

We here’s progress so far, I contacted a friend with a printer who was happy to print me one using that link kindly provide by @N Dentressangle obviously not perfect but I’m more than happy with it for the time being, we’ve just got to figure out if the print material used can stand up to chrome dipping or if spray paint is the way forward, I’ve also ordered one of these from this eBay seller, just a replica but again it doesn’t bother too much as it still looks the part, it’s going to be a while before it shows up though 

[N Dentressangle]

Looks good to me - can of chrome spray paint and job's a good un! 😎

[lesapandre]

4 hours ago, N Dentressangle said:

Looks good to me - can of chrome spray paint and job's a good un! 😎

Gotta be GOLD 😂

[richardmorris]

Thought of the rolls earlier watching the latest YouTube from Iain Tyrrell. He was showing how the rolls Royce electric windows worked. The reason the motors have so many wires is that they have a solenoid driven brake that basically locks any movement.

 

[Weird Car]

So I had a long drive up to Leeds today to a fantastic Rolls and Bentley breakers yard to collect a door card for the Shad, the MG ZT handled this 500 mile trip thankfully with no drama after finally diagnosing the dodgy crank sensor, it was honestly so cool just wondering around this yard, the door card was £100 including all the fitting and fixtures unfortunately non of the cars had a blue interior so I settled for creamy yellow I’m going to have a go at dying it blue before fitting it though!