dome Posted June 1, 2021 Author Posted June 1, 2021 Manta engine and box ahoy... Jim Bell, CreepingJesus, djim and 14 others 15 2
dome Posted June 1, 2021 Author Posted June 1, 2021 So, I'm buying this for the engine, yeah? VID_20210601_083045.mp4 Oh. juular, rainagain, Dick Cheeseburger and 7 others 10
dome Posted June 1, 2021 Author Posted June 1, 2021 And we're on. Back to sunny Fife. Don't worry about the engine, I have a plan... djim, jaypee, The Moog and 3 others 6
CreepingJesus Posted June 1, 2021 Posted June 1, 2021 Does the plan involve oil like treacle, a good handful of sawdust, and turning the stereo up really loud? dome 1
Bren Posted June 1, 2021 Posted June 1, 2021 A skeleton wanking in a biscuit tin springs to mind. dome, sutty2006, CreepingJesus and 2 others 3 2
cort16 Posted June 1, 2021 Posted June 1, 2021 The duratecs in these mx5's seem to be an absolute bork fest. I presume dome has some cunning plan to stroke it using the crank shaft from a Bongo Friendee or something? Split_Pin, dome and CreepingJesus 3
Supernaut Posted June 1, 2021 Posted June 1, 2021 1 hour ago, dome said: So, I'm buying this for the engine, yeah? VID_20210601_083045.mp4 9.87 MB · 0 downloads Oh. That made me say "Oh, fucking hell!" out loud. Top purchase! dome 1
dome Posted June 1, 2021 Author Posted June 1, 2021 It's a nice day, let's get the roof down. gm, Tickman, Dick Cheeseburger and 5 others 3 5
Supernaut Posted June 1, 2021 Posted June 1, 2021 1 minute ago, dome said: It's a nice day, let's get the roof down. I bet even the roof rattles like a bastard, too. CreepingJesus 1
big_al_granvia Posted June 1, 2021 Posted June 1, 2021 i am guessing cunning plan involves thee backplate of the engine being removed then bolted to the back of a (now) former fwd duratech or possibly a t5 lump from a focus st, the same t5 that powers so many ovlovs and dome tries to claim associate membership of the svm dome 1
big_al_granvia Posted June 1, 2021 Posted June 1, 2021 as for the ma5da, it goes to andy lamont motorsport for eventual build into a trackday/drift car, or possibly ma5da supercup as run by the brscc
dome Posted June 1, 2021 Author Posted June 1, 2021 49 minutes ago, cort16 said: The duratecs in these mx5's seem to be an absolute bork fest. I presume dome has some cunning plan to stroke it using the crank shaft from a Bongo Friendee or something? Plan will involve a Mazda 6 with 2.3 or 2.5 engine using the rwd parts from this car. I've gone halfers with my mate who will break the rest of it. But the main thing to do is get the engine and box out and squint really hard at it to make sure it'll all fit in the Manta before welding starts. sutty2006, Tickman, cort16 and 3 others 4 2
dome Posted June 1, 2021 Author Posted June 1, 2021 1 minute ago, Split_Pin said: Is that the engine from an MPS? I heard they GLF. MPS is turbocharged, not sure if it's the same basic engine or not. This is(was) 160bhp 2.0 NA
Fraz Posted June 1, 2021 Posted June 1, 2021 42 minutes ago, Split_Pin said: Is that the engine from an MPS? I heard they GLF. Can confirm - Mazda 3 MPS REALLY shift down the road.
Fraz Posted June 1, 2021 Posted June 1, 2021 2 hours ago, dome said: So, I'm buying this for the engine, yeah? VID_20210601_083045.mp4 9.87 MB · 0 downloads Oh. Brings back bad memories of the s4 ☹️ dome 1
320touring Posted June 1, 2021 Posted June 1, 2021 3 hours ago, dome said: It's a nice day, let's get the roof down. Doubled the skip capacity:) CreepingJesus, Supernaut, dome and 1 other 1 3
dome Posted June 1, 2021 Author Posted June 1, 2021 Back to my mates unit and up on the ramp for a squizz Don't buy Japanese cars from Scotland kids. This is more what I'm after-the mx5 5 speed box is much smaller than the 6 speed version so hopefully will fit in the Manta tunnel. Interior isn't bad and the body panels are ok apart from one door, it should break well hopefully. juular, cort16, Supernaut and 3 others 4 2
Supernaut Posted June 1, 2021 Posted June 1, 2021 Wow! Did you have to drag it out of the North Sea before loading it into the trailer?
Split_Pin Posted June 1, 2021 Posted June 1, 2021 Jesus wept that is ripe. The Manta is 100% better even as it stands! Hopefully the gearbox will be suitable for your Manta. Tickman 1
cort16 Posted June 1, 2021 Posted June 1, 2021 Mazda MX-5's rusting non stop from 1989 - 2014 It's amazing that they've never learned their lessons regarding rust really. Barry Cade and dome 1 1
big_al_granvia Posted June 1, 2021 Posted June 1, 2021 well the mx5 was meant to be an interpretation of the classic british sports car, triumph spitfire, mg-b etc, seems they interpreted the rustproofing bit too literally, thats well crusty dome and Tickman 1 1
Barry Cade Posted June 1, 2021 Posted June 1, 2021 Let's hope with later ones they learned how to properly rustproof a car from Fiat. There's a sentence that'd make beer come down your nose. Supernaut, dome, Tickman and 7 others 1 9
Minimad5 Posted June 1, 2021 Posted June 1, 2021 If you get stuck and need a engine, I have a Eunos 1.6 here with ECU. Just needs a sump but ran well when last in the car dome 1
Jim Bell Posted June 1, 2021 Posted June 1, 2021 10 hours ago, dome said: I've gone halfers with my mate who will break the rest of it. Isn't the rest of it already broken?! McGomez, Dick Cheeseburger, Supernaut and 1 other 2 2
sutty2006 Posted June 1, 2021 Posted June 1, 2021 I’d be tempted to look out for a 5 speed tunnel for that. It’ll be a treat that’s for sure! dome 1
dome Posted June 1, 2021 Author Posted June 1, 2021 33 minutes ago, sutty2006 said: I’d be tempted to look out for a 5 speed tunnel for that. It’ll be a treat that’s for sure! Is there much difference in the tunnels apart from shifter location? This is the reason for getting an engine now, I want to see what it's going to take to make it fit before I go any further
dome Posted June 1, 2021 Author Posted June 1, 2021 4 hours ago, Minimad5 said: If you get stuck and need a engine, I have a Eunos 1.6 here with ECU. Just needs a sump but ran well when last in the car Thanks but this is a totally different engine and box to the MK1/2 MX5s Minimad5 1
Minimad5 Posted June 1, 2021 Posted June 1, 2021 9 minutes ago, dome said: Thanks but this is a totally different engine and box to the MK1/2 MX5s Yeah I was just suggesting if you end up binning it off, yet want to keep the MX5 route, then feel free to pop us a P.M as this would fit (might even have a gearbox somewhere too) Keep us updated with progress 😎
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now