For Sale Autoshites *official* WANTED/OFFERED thread...

[Kiltox]

Need a passengers front wing for an Audi A6 C5 - preferably in green

[stripped fred]

Does anyone have an old 406 knocking about? I'd like to find a number '4' as mine just says '06'. Thanks.

[Station]

Clarke 90 welder - the only damage is where I lowered the car and the welder was still under it. I'll take the cover off and press it out before sale. Everything works, not sure if gas bottle is empty, probably is. Has a nearly full spool of 0.7 wire. £45

 

 

 

 

[twosmoke300]

A good buy for someone that is ! I've had a little blue Clarke 100 for about 4 years in a working garage and it's brilliant

[Tamworthbay]

I have a spare swan neck for one of them of anyone needs one. Bought it in error as doesn't fit the red clarkes. Free if of use to anyone.

[matty879]

I have a spare swan neck for one of them of anyone needs one. Bought it in error as doesn't fit the red clarkes. Free if of use to anyone.

is it just the neck,or is it the full trigger,ive got the old blue type forget which model but will check,but i need a complete torch.

[Tamworthbay]

is it just the neck,or is it the full trigger,ive got the old blue type forget which model but will check,but i need a complete torch.

just the neck sadly, but brand new in the packet still.

[plasticvandan]

Pair of car ramps £20

 

Nos vango kingfisher tent,proper 2 man cotton ridge tent,bought from this very forum but I no longer need iuiut,perfect for shitefest? £50 which is what it owes me,can post or collect from pershore

[Guest colb]

Wanted Allegro steering column plastic surround two piece trim top and bottom covers the control stalks and wiring behind steering wheel

Part now obtained, very difficult to find.

[AlabamaShrimp]

Anyone got a spare one of these tubes for a normal plastic (think 5 litre) petrol can?

 

[Station]

Welder now 35

[Guest colb]

Clarke 90 welder - the only damage is where I lowered the car and the welder was still under it. I'll take the cover off and press it out before sale. Everything works, not sure if gas bottle is empty, probably is. Has a nearly full spool of 0.7 wire. £45

image.jpeg

image.jpeg

image.jpeg

Where are you? It shows you as Japan on the forum but pictures would suggest uk. If you are near me I may be interested

[beko1987]

Something for the weekend cleaning sir?

 

Vaclensa ProClean vac. Dry only, fully refurbished with new tools. Can bring to shitefest, or delivery at <£10 is fine. Thought I'd try here before peppering facebook! £40 to a shiter

 

 

[ruffgeezer]

Any luck on a wet vac yet?

[beko1987]

Fraid not ruff

[skattrd]

Beko - do you have anything suitable for vacumming up rubble? well, not quite but something sturdy for building site use?

[beko1987]

Not really, the above would do it but wouldn't like it much! You tried one of the £40 wickes/toolstation cheapy vacs? They will be unrefined but more bomb proof for work on a building site.

 

http://www.wickes.co.uk/Wickes-Wet+Dry-Vacuum-with-Blower/p/215735 this sort of thing, it will have a paper cartridge filter like the old AquaVacs did that you can take a year off your life every time you bash it out on a wall!

 

Or, feel free to give me your/your local tesco postcode and I'll have a look on ebay and scumtree for you!

[omegod]

Rover 200 series / R8 driver side central locking gubbins needed , Rover whore is playing up so needs me to use the appallingly weak remote then unlock manually with key

[Burnside]

WANTED.

 

A sierra sapphire rear bumper ideally a base spec model and if painted silver even better!

 

A friend had his rear bumper stolen after leaving it outside while working on his car and is trying to get his long term project back togther hopefully.

 

If anybody can help or point me it the right direction of one that would be great.

[beko1987]

Wanted - internal and external steering column uj's for a citroen zx!

 

The spray grease isn't working, its gone stiff again!

 

Pointers on how to get the joints off would be handy too, does it just unbolt easily?

[beko1987]

Or even a whole steering column, as it looks like its one unit (or hidden bolts)

 

http://www.ebay.co.uk/itm/291754579218

[Station]

Wanted - pipe and sucker flat thing on the end for a Hoover. It's big and none others fit. Have also tried drain pipe.

 

[robthedonkey]

Is one piece column im afraid beko..

 

Sent from my SM-G920F using Tapatalk

[omegod]

I'll take the mig if it's still available , PM'd you station

[beko1987]

Wanted - pipe and sucker flat thing on the end for a Hoover. It's big and none others fit. Have also tried drain pipe.

 

image.jpeg

 

http://www.ebay.co.uk/itm/Extra-Strong-Long-2-5m-Hose-Toolkit-Floor-Tool-For-Numatic-Henry-Vacuum-Cleaners-/391216930098?hash=item5b16589d32:g:kewAAOSw9N1Vw21-

 

You want a Numatic bent end, poles and floor tool. 32mm. The whole toolkit is cheaper than trying to find just the tools, although if your coming to SF, or someone who is lives near you I can bring something along, got a spare one.

 

Nice Premiere Mini though! I had one recently, got one in the shed too but it needs carbon brushes

 

http://manchestervacs.co.uk/DysonForum/index.php/topic,2478.0.html

[beko1987]

Is one piece column im afraid beko..

 

Sent from my SM-G920F using Tapatalk

Damn, but thanks! Saves me looking for a part that doesn't exist!

[Wilko220]

Wanted - pipe and sucker flat thing on the end for a Hoover. It's big and none others fit. Have also tried drain pipe.

 

image.jpeg

This any good, Station?

 

Comes with a free Citroen Xantia

[beko1987]

Should be if it's 32mm (or pack it out with tape if not), I have a bent end I can bring and we can try. I'll take the Xantia if it helps?

 

The filters for those premaires goes through the washing machine like a champ too, I'll bring a bag or 2 if you want?

 

We will rebuild him!

 

I don't have any good floor tools actually, must sort that out. I binned all the shit fucked ones I had.

[beko1987]

Is one piece column im afraid beko..

 

Sent from my SM-G920F using Tapatalk

Sorted, I forgot about the white ZX breaker I had a load of bits off last year, the guy still has it, and the steering column and middle bit/second UJ. Mine for £25 and he's happy to hold it all for me until I get paid at the end of the month/sell anything before then.

[Station]

I have a bent end I can bring and we can try.

You keep your bent end away from me!

I'll have to measure the pipe. It's a good Hoover, nearly sucked the whole carpet up in the car!