Six Cylinders Motoring Notes

[Andyrew]

It was alot cleaner when I looked at it last, 

I can smell the horse piss from here.  

 

[richardmorris]

12 minutes ago, Slowsilver said:

I actually thought it was Continuously Variable Transmission, but what do I know?

EDIT: Just googled it.

Continuously variable transmission

From Wikipedia, the free encyclopedia

A continuously variable transmission (CVT),

Turns out I do know stuff after all. Who'd have thought it. Certainly not me.
 

EDIT again: Six-cylinder beat me to it. I know stuff but can only type really slowly.

 

SlowSilver on Saturday.

[Supernaut]

How does one even fix a CVT?

Apart from throwing it in a skip, that is.

[Andyrew]

Gy6 seems to ring bells with me but dont hold me to that, 

Dropping the belt drive cover off required the kick start lever taking off, the plastic side step then it's multiple 8 or 10mm bolts into the casing. The red side panel could stay on. 

There was originally a paper gasket on the CVT housing  but  seem to remember smearing a splodge of hylomar or rtv on there when I last looked.

The little clutch and pulley is like this. 

[richardmorris]

https://youtu.be/h-N-P5aKYFQ

[LightBulbFun]

1 minute ago, Supernaut said:

How does one even fix a CVT?

Apart from throwing it in a skip, that is.

like so

 

[Andyrew]

Another fun fact. I have a small scar on my arm from the cooling fins on the pulley of this fine piece of engineering. 

I had heated the centre nut to release the loctite take the pulley off and the aluminium soaked all the heat up sharpish so when doctor dipshit here then proceeded to lean my arm down on the pulley by mistake I burned the shape of a small table into my arm.  

[richardmorris]

I’ll bring the big first aid kit then. Should be ok, short of an imputation ( but then I have a belt to use ). My finger has just about healed since the last visit too.

[beko1987]

Isn't it basically a volvo 340/daf then? 

[SiC]

I still want kids, so I'm going to stay well away from riding any broken belted nonsense!

[Tadhg Tiogar]

6 minutes ago, SiC said:

.... I'm going to stay well away from riding any broken belted nonsense!

Riding bareback is an option.

[Six-cylinder]

Usual stuff to get us ready Festival of  the Unexceptional camping  next weekend

Drinking tea

Cut grass

Erect tent for HQ

 

Fixing list

Jinling

Roller, tighten bolts and find/adapt and fit a 50mm tow hitch.

Peugeot 50cc scooter

Honda field moped, see if it works!

Fix Hayter Condor mower

Test pilot for VP1500 following petrol leak repair!

Take apart and photograph black range Rover to sell spares 

Polish Alfa Giulietta

 

 

And for those with a death wish there is now a fully working 125cc scooter on site!

[spartacus]

That Jin ling thing looks like it could be useful when repaired, what's the load capacity?

[Six-cylinder]

2 minutes ago, spartacus said:

That Jin ling thing looks like it could be useful when repaired, what's the load capacity?

I can't find that but it is 200cc weights 185kg and tows 300kg. The carrying box is 900mm x 1000mm.

[spartacus]

That seems pretty respectable, I guess it'll tow your roller, and probably any other stuff you might need to drag around, anyhoo, there's something to be said for increasing the size of a fleet of tat just to do 'jobs' around a smallholding.

Well bought!

[Bfg]

 

16 hours ago, Six-cylinder said:

continuously variable transmission

I invented one of those when I was still at school (very early 1970's)  ...well so I thought . .

^ Using two cones, both with high-friction surfaces ; one as the gearbox input shaft, the other as output.   A tertiary shaft carries an idle wheel, also with a high friction surface (like a tyre) to bear against both cones.  This wheel might be controlled to move up and down the shaft, and in doing so transfer the drive at different ratios.   Very simple and lightweight with few moving parts, probably running dry with sealed bearings ..and as the title says : continuously variable.   ie., absolutely no steps between bottom and top gears.  My best friend at the time laughed and told me DAF had already done it, so I realised I must be a right twit and so didn't bother inventing much more.  And of those I never had the self-esteem to pursue them commercially or for good cause,  nor even to tell anyone else. ( I still use the hot air bed warmer though ..each winter)  .

.

[beko1987]

I can certainly help get the tent up. Can stand and make funny noises whilst those who know what their doing do mechanical stuff if it helps? 

[Six-cylinder]

In addition to my new toy I believe there is to be a vehicle deliver to the FoD this Saturday afternoon for another member of the forum, but I have been sworn to secrecy!

[Six-cylinder]

snagglepuss - I don't think it is the one you are thinking about, last time I asked there was no date for that one.

[NorthernMonkey]

14 hours ago, Bfg said:

( I still use the hot air bed warmer though ..each winter)  .

[Six-cylinder]

For those attending Prep day this weekend a heads up that it is the GP at Silverstone. We are far enough away not to be directly effected but remember to plan your route to us avoiding Silverstone and the A43 between Brackley and Towcester.

[beko1987]

On 7/10/2019 at 6:29 AM, Six-cylinder said:

In addition to my new toy I believe there is to be a vehicle deliver to the FoD this Saturday afternoon for another member of the forum, but I have been sworn to secrecy!

I know what is is! And I'm sworn to secrecy but it'll be very cool!

Then I pop round to see Mum at lunchtime and she's got a stonking massive cold so I bet won't be wanting to come this weekend so I can't play as freely as I'd like as I'll need to watch 2 kids who will just want to climb all over the digger... Yey

[AnthonyG]

On 7/10/2019 at 6:29 AM, Six-cylinder said:

In addition to my new toy I believe there is to be a vehicle deliver to the FoD this Saturday afternoon for another member of the forum, but I have been sworn to secrecy!

That’s a good CPT challenge, I reckon BMW M3 4dr saloon of whatever the generation that’s just been replaced is (F90?).

[Six-cylinder]

8 minutes ago, AnthonyG said:

That’s a good CPT challenge, I reckon BMW M3 4dr saloon of whatever the generation that’s just been replaced is (F90?).

Disclaimer - picture for illustrative purposes only!

[AnthonyG]

Shame, I was looking forward to drifting it around the big field?

[Six-cylinder]

Just now, AnthonyG said:

Shame, I was looking forward to drifting it around the big field?

I think Shiters would leave in there droves if a modern M3 turned up!

[wuvvum]

1 hour ago, AnthonyG said:

Shame, I was looking forward to drifting it around the big field?

You could always drift Brodders' Omega around the big field.  Brodders' Omega is fun to drift around big fields.

[Mrs6C]

No drifting in big fields I'm afraid - the hay hasn't been cut yet!

[Tadhg Tiogar]

On 7/9/2019 at 10:16 PM, Six-cylinder said:

.....for those with a death wish there is now a fully working 125cc scooter on site!

I've got a client to see on Saturday but if I can get away quick enough, that scooter might be a gas....

[richardmorris]

I’ll bring up the toolkits, crimp set and soldering iron. Undecided on what car yet. I’m getting the Mercedes’s aircon fixed tomorrow so may give it a run up. X1/9 exhaust needs replacing really.