Jump to content

Maestro, please. - Support Socks


vulgalour
 Share

Recommended Posts

Amazingly, I didn't even get any splashback on my specs.  Still not sure how I managed that tbqh, I'm just thankful for small miracles.

What I did manage to do is cock up the valve adjustment by reading the wrong bit of the manual because my goodness I'm so tired and I just need a holiday and can't take one... so I have to go back in and redo it all again to the correct gaps.  At least it'll be a lot less grimy and stuck this time around.

The new rocker cover gasket appears to have cured the miasma of burning oil that wafts into the cabin too, so that's nice.

Link to comment
Share on other sites

2 minutes ago, grogee said:

Mine is now stainless too. I wonder if they're the same system? Mine has a tailpipe that seems to stick out a bit too far, I've been thinking I might trim it a bit.

IMG_20221026_164212955.jpg

IMG_20221104_121340559_HDR.jpg

Mine's not fully stainless it turns out.   Tailpipe and backbox are, the rest looks to be mild steel.  Your exhaust does stick out a long way, at least in that shot, perhaps it's originally for a van?  Nothing an angle grinder can't fix.

Link to comment
Share on other sites

You know when a chip ends up lost at the bottom of the oven for [redacted] and turns into a little black bit of carbon?  That's what the old cork gasket looked and felt like.  I fitted a new one, it should tolerate a refit so I shan't replace it unless I have to.

Link to comment
Share on other sites

  • vulgalour changed the title to Maestro, please. - Cornflakes

Let's have a go at some video write ups, see how we get.  Pat is now testing negative for Covid and is almost entirely well again, which is super.  I've been testing negative since he contract it, but I've also spent the last few days having all the Covid symptoms on speedrun so that's been pretty appaling.  Today I'm sore, my sinuses are blocked, and my temperature is very up and down.  Still, gives me time to try and get caught up on this since I can take breaks as I write if I need to.

 

The old lower front grille on the Maestro is bust and repaired and needs replacing.  The fixings holding it on aren't original.
314269425_27-LowerFrontGrille_1.thumb.jpg.f38ddb1c8a48748de2906c98022e4d7a.jpg

1586040091_27-LowerFrontGrille_2.thumb.jpg.fa552410354d8fc71fb526cd0558175e.jpg

The repair works, so I can't fault the creator of it on that front, I can just do better.  First up is removing the four fixings that hold it in place, one at each end of the grille and two in the middle.
1758633647_27-LowerFrontGrille_3.thumb.jpg.96cbe97144fac994212874bb93714c35.jpg

2084467021_27-LowerFrontGrille_4.thumb.jpg.93162f716212e8b5f512c3844b5ef390.jpg

952478345_27-LowerFrontGrille_5.thumb.jpg.04c6297e84278b3a367c64440d8edf06.jpg

The passenger side one proved more challenging because the head had turned to rust.  The stack of improvised parts was curious too.
336085037_27-LowerFrontGrille_7.thumb.jpg.d686bddc40c0c5614b7d7540b737ce8d.jpg

86743297_27-LowerFrontGrille_6.thumb.jpg.4453f08aad2771a7487b2f94530f16a1.jpg

I'm not entirely sure what the wrinkle paint coated aluminium was off originally that was used to repair the old grille, perhaps some old electrical device?  They'd gone to a lot of trouble with shaping and cutting out holes for air flow, pretty commendable stuff really, just like that front wing.  Just seems a bit strange this much effort was undertaken rather than just buying a replacement.
1493139050_27-LowerFrontGrille_8.thumb.jpg.b5398a2af0478e0be970a5a355e1c91d.jpg

Link to comment
Share on other sites

Apparently, the original fixings are plastic with a push pin that spreads the legs on the back of the fixing to hold it all in place.  I didn't have anything like that so I reused the plastic squares from the old fixings, some grommet things scavenged from the inside of Princess doors, and some suitable screws.  These worked pretty well.
1122590740_27-LowerFrontGrille_9.thumb.jpg.d429ac0a85b8e822b302aa7d2908abd5.jpg

1152213934_27-LowerFrontGrille_11.thumb.jpg.f45783ab17374975830031ff94a7d948.jpg

For a belt and braces approach I also used a couple of cable ties on the outer corners until I can get proper fixings to hold this in place, I didn't entirely trust the ancient plastic of the grommets I'd used and thought it sensible.  You can't tell I fixed anything, so this is definitely something I could have left alone.
1133851825_27-LowerFrontGrille_10.thumb.jpg.052cf1d73e30c633224b7000ae8235b8.jpg

Link to comment
Share on other sites

  • 2 weeks later...
  • vulgalour changed the title to Maestro, please. - The Most Time Of The Year
  • 4 weeks later...
  • vulgalour changed the title to Maestro, please. - Support Socks

Hats off @vulgalour  that's good going and far, far better than I managed inside my Saab (which wasn't as holey). Loving the masking tape tip, wish I'd known that instead of pissing about with cereal packets.

Where are you at with it now, is it any more built up or are you still waiting for some non-brass monkey weather?

Mine is going to A Man at end of Feb for sills, arches and a roof repair. I managed to find sills but there is a wait time of about 12 weeks or something stupid like that.

By the way there are 2x arches for sale on the Bay as well as a RH rear quarter panel (both steel bumper cars I think). Both Megabucks of course but may be open to negotiation, who knows.

The bit I'm really interested in is the inner and outer arches and how you fabricate then weld them.

Link to comment
Share on other sites

@Noel Tidybeard I guess someone replaced the original then?  Doesn't look like it's off another car and definitely seems to be plastic rather than steel.

 

@grogee In real time it's all welded up both sides, and in daily use again and has been for some time.  The rear arches both sides ended up giving me a lot more work than I anticipated, drivers side was definitely the worst of the two.  When I did it the only repair panels I could get were for Montego (which is technically the same) for one side of the car and not great pressings at that. I would have loved to have got a proper pair of metal arch quarter panels when I was doing the repair, sods law that they'd be available now like.  The arch I built out of front wings actually looks more correct than the new panel I used, which is annoying until I remember you can't see both sides of the car at the same time.  Next Maestro vid is probably the 31st Jan, it was either going to be more Lanchester wiring that week or rebuilding the Maestro arch from scrap.  Ended up being a big job so it took rather more videos to document than I expected.

Link to comment
Share on other sites

Oh... speaking of where the car's at now, friend of mine just made me aware I've been spotted by a Facebooker.

202301-01.thumb.jpg.99bead835661b67c20f4e577803c072e.jpg

What do we think, better or worse than when it was spotted back in December of 2020?

202012-47.thumb.JPG.9f1875c878b680ef0d919198a1494424.JPG

I don't feel like I've had it much more than a few months, never mind two years.  What even is time any more?

Link to comment
Share on other sites

59 minutes ago, vulgalour said:

@Noel Tidybeard When I did it the only repair panels I could get were for Montego (which is technically the same) for one side of the car and not great pressings at that. I would have loved to have got a proper pair of metal arch quarter panels when I was doing the repair, sods law that they'd be available now like.  

£200/pair mind. Although the time you spent making the arches from the Montego panel... possibly good value, possibly not.

https://www.ebay.co.uk/itm/295478621944?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=M0aSXOlSTUq&sssrc=2349624&ssuid=2Z40wC2iSsq&var=&widget_ver=artemis&media=COPY

Don't Montego ones have more 'boot' behind them? I suppose it doesn't matter for the actual arch bit.

Link to comment
Share on other sites

1 hour ago, grogee said:

£200/pair mind. Although the time you spent making the arches from the Montego panel... possibly good value, possibly not.

Don't Montego ones have more 'boot' behind them? I suppose it doesn't matter for the actual arch bit.

I would have paid £200 a pair since they include all the awkward bits on the corners, would have saved me a load of time if the fit is good, that's really not a bad price for the work involved otherwise.  If you've the cash to and you're in need of them, they're probably worth grabbing to be honest.  A full metal bumper rear quarter did pop up after I'd finished doing mine, the whole thing from roof to valance, I think that was something like £80 so somebody got a bargain.

As for Montego arch repair panels,  they're usually the same as plastic bumper Maestro panels since they usually don't include the lower metal valance section.  Fortunately that didn't cause me too much grief as mine was salvagable due to historic repairs done to a reasonable standard, but it would have been nice to just chop it all off and blend one of those panels you linked in instead for the time saving if nothing else.  The panels I got just seemed over-stretched, and too soft on the details, as if they'd used a slightly too large/worn out stamp.  Which they probably had.  They were cheap though, £30 each I think?  Get what you pay for sometimes.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Similar Content

    • By mat_the_cat
      A mate of mine at work has just restored this, and now it's (just about) finished, is selling it. He wants what seems like a fair price for it, and it might be my only chance to indulge a boyhood dream before values climb too high. And hopefully I shouldn't lose out!
      Is there anyone around who knows the values they actually sell for? Obviously I've looked at adverts and completed eBay listings, but don't know if they reflect reality!





    • By Dave_Q
      None of my vehicles are really interesting enough for their own thread, so I'm going for a tat blog style consolidated thread.
       
      The modern* - Citroen Berlingo 2.0 HDi
       

       
      The best and only photo I have of it.
      Generally reliable but showing it's 153k miles in various areas.
      It's good at hauling people and things around, that's about all I can say.
      Current status - off road for fixing of torrential oil leak and floppy gear change.
       
      The classic* - BMW 318iS
       

       
      Photo stolen from seller's ad.
      A recent £292 ebay purchase.
      I thought I would strip it out and do some track days but after driving it for a while I'm not sure now.
      112k miles, some sort of service history, far from a creampuff but hasn't been messed about with like so many.
      Check out the orange indicators and standard 15 inch rims. SOAVE.
      Current status - daily use.
       
      Motorbike 1 - Honda VFR750
       

       
      Has done me well as a 'first big bike' but it's replacement is already lined up.
      Current status - Awoken from winter slumber and with MOT station pending results tomorrow.
       
      Motorbike 2 - Honda Fireblade
       

       
      Bought cheap as needs gearbox looking at - jumps out of second (they all do that if they've been ragged sir.)
      Current status - gearbox repair is after Berlingo on to-do list, hoping for on the road by June.
       
       
      So there they are. Not very interesting but I will update the thread with my with my various spannerings/misadventures/getting bored and selling them all etc.
    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
    • By Blake's Den
      Hello all
      I inherited this Santa Fe V6 about seven years ago. Shortly afterwards the fuel line split and the car was parked up. After towing it to parking locations (and after the rats moved in!) I've decided to get it running.
      It's too good to scrap (only 30k miles), too naff to sell so I've decided to get it running and have some fun with it. When I did drive the car years ago it was actually quite nice to drive. It's also got all of toys: sunroof, heated seats, leather etc.
      Here's a video of me trying to get it to run. Will it start?!
       

    • By Dick Longbridge
      As with many of the members on here, I tend to read and comment a lot, but haven’t done much in the way of my own shite related posting. The onslaught of miserable teenage goat bummers (©Bollox2019) has encouraged me to share a little more, rather than look at the screen and shake my head. As my fiancée once told me, Dick is for sharing. Or something.
       
      Updates are likely to be sporadic, and not necessarily ‘car project work’ per se. Sometimes it may just be the odd photo.
      Anyway, now the disclaimer is out the way, and without further ado, I’ll start with this.
       
      I bought my Lambretta just over ten years ago. I’ve had a few over the years, and even dabbled with the dark side, or as they are sometimes known, Vespa.
       
      Collection of this scooter involved a fucked Transit, and a day trip to Stoke from sunny Cornwall. Breathing in diesel exhaust fumes which permeated the van through the rusty gaps under the back doors was becoming tiresome by the twelfth hour of driving. We managed it though, and the scooter was well worth the journey. It’s an Italian 1967 SX150, with a 186 Imola kit, plus various other trick bits. It was originally Verde Mela - a rare Innocenti colour - which is basically apple green. Unfortunately the previous owner stripped every last trace of it from the frame, and repainted it in a Peugeot metallic. Not something I could ever bring myself to do, but it looks good all the same.
       
      I had plenty of fun with the scooter, and even made it to the Isle of Wight rally on it (I’ve done this a few times on previous scooters). However, as with many of us, life and house got in the way, and it’s sat in the garage under a cover for way too long.
       
      I hadn’t fired it up for well over 12 months, so decided to drag the old dear out into the sunshine, fire her up, and give her a blast around the estate. I did a quick video of getting the scooter started - no sound because time lapse - startup was a bitch as the fuel was really stale, half evaporated and leaving the oil/ratio mix completely oil heavy. You can make out when it eventually fires up in the video - wait for the smoke around the back end!
       
      I’ll end by adding the startup video. I’ve got a load more photos somewhere on the external HDD, including some of my previous Lambrettas. I'll have to dig them out when I get chance.
       
      TTFN.
       
×
×
  • Create New...