bigfella2 Posted May 13, 2020 Share Posted May 13, 2020 Don't discount the MK Indy too, very similar to the GBS zero, I don't know how it compares cost wise, as it gets complicated when you look at the different options. Link to comment Share on other sites More sharing options...
New POD Posted May 13, 2020 Share Posted May 13, 2020 The exocet is a kind of poormans atom. It needs a turbo nutter engine to pull off the looks though. Our 93 bhp 1.6 Monza, ain't going to cut it as a viable donor. gm 1 Link to comment Share on other sites More sharing options...
motorpunk Posted May 13, 2020 Share Posted May 13, 2020 2 hours ago, gm said: That’s the next step before I commit, to try and get a good look at one in the flesh. There are a few in the local area, once lockdown eases I’ll try to arrange a visit Kit Car show is a good place, should be late August 2020 in Warwickshire - https://www.nationalkitcarshow.co.uk/ Be very, very careful. Link to comment Share on other sites More sharing options...
gm Posted May 13, 2020 Author Share Posted May 13, 2020 50 minutes ago, bigfella2 said: Don't discount the MK Indy too, very similar to the GBS zero, I don't know how it compares cost wise, as it gets complicated when you look at the different options. I've not heard of that one, more research required bigfella2 1 Link to comment Share on other sites More sharing options...
gm Posted May 13, 2020 Author Share Posted May 13, 2020 Just now, motorpunk said: Kit Car show is a good place, should be late August 2020 in Warwickshire - https://www.nationalkitcarshow.co.uk/ Be very, very careful. leave the wallet at home and keep the beer intake to a minimum ? Link to comment Share on other sites More sharing options...
motorpunk Posted May 13, 2020 Share Posted May 13, 2020 1 minute ago, gm said: leave the wallet at home and keep the beer intake to a minimum ? Ha! Not just that, more be very careful what you buy, there's no consistency in kit cars and the fundamental design of some is downright dangerous. Have a look at this mag - https://completekitcar.co.uk/ Owned by a mate. You'll find some inspiration in there. gm and stereotype 2 Link to comment Share on other sites More sharing options...
gm Posted May 13, 2020 Author Share Posted May 13, 2020 that's this evenings reading sorted, cheers Link to comment Share on other sites More sharing options...
gm Posted May 13, 2020 Author Share Posted May 13, 2020 if only it was this simple in real life Craig the Princess, paulplom, Floatylight and 1 other 4 Link to comment Share on other sites More sharing options...
gm Posted May 13, 2020 Author Share Posted May 13, 2020 59 minutes ago, New POD said: The exocet is a kind of poormans atom. It needs a turbo nutter engine to pull off the looks though. Our 93 bhp 1.6 Monza, ain't going to cut it as a viable donor. I'll concentrate on getting it built first, at half the weight of the original it should still go like stink with the tiddly little 1.6 engine. for all the time I've been mucking around with 5s, I've resisted the temptation to go turbo or supercharged as they change the character of the car, I like that you can drive it at 10/10ths and squeeze every last drop of performance out of it. easy to fit after the build if I do decide to go that way though. paulplom and loserone 2 Link to comment Share on other sites More sharing options...
DVee8 Posted May 13, 2020 Share Posted May 13, 2020 We just popped round to have a look,but no sign of anyone.. gm 1 Link to comment Share on other sites More sharing options...
gm Posted May 13, 2020 Author Share Posted May 13, 2020 I'm upstairs in the 'office' doing important research on the kit car site DVee8 and The Moog 1 1 Link to comment Share on other sites More sharing options...
Tenmil Socket Posted May 13, 2020 Share Posted May 13, 2020 Hey @gm I've just spotted this if of any use for parts? https://www.ebay.co.uk/itm/Mazda-MX5-Mk1-NA-Project-Car/293578532043?hash=item445aa4e4cb:g:4UoAAOSwDSperVgA And this but it's in Cornwall. https://www.ebay.co.uk/itm/Locost-Chssis-Based-on-mx5-mk1/383535327621?hash=item594c7ca985:g:-BEAAOSwLhJesyfF gm 1 Link to comment Share on other sites More sharing options...
gm Posted May 13, 2020 Author Share Posted May 13, 2020 Crikey - the roll bar and coil overs are worth more than that @snagglepuss @NorthernMonkey any interest to you two ? The Moog 1 Link to comment Share on other sites More sharing options...
NorthernMonkey Posted May 13, 2020 Share Posted May 13, 2020 That is silly cheap if it goes for that price but I’ve already got two of the buggers plus enough bits to build an Exocet! Now @snagglepuss, well that’s a different matter.... ? The Moog 1 Link to comment Share on other sites More sharing options...
1duck Posted May 13, 2020 Share Posted May 13, 2020 11 minutes ago, gm said: Crikey - the roll bar and coil overs are worth more than that @snagglepuss @NorthernMonkey any interest to you two ? would they fit an NB? or is that a stupid question? Link to comment Share on other sites More sharing options...
gm Posted May 13, 2020 Author Share Posted May 13, 2020 Roll bar - yes, coil overs - possibly, you might need mk2 top mounts 1duck 1 Link to comment Share on other sites More sharing options...
1duck Posted May 13, 2020 Share Posted May 13, 2020 Just now, gm said: Roll bar - yes, coil overs - possibly, you might need mk2 top mounts nice, i might stick a bid in if it stays low. I'll have a read around, see if the coilovers will fit, he's pretty much round the corner. Link to comment Share on other sites More sharing options...
gm Posted May 13, 2020 Author Share Posted May 13, 2020 just a couple of hours pottering this afternoon, I chopped the vin plate off the shell and removed all of the brake and fuel pipes. I won't be using the angry grinder to chop the shell as it consumed most of a new disc just to cut the vin time to invest in a reciprocating saw, me thinks. power steering pump off, alternator off, remains of loom off suspension bolts all dowsed with plus-gas in preparation for strip down tomorrow. one broken rear spring will need replaced if I re-use the current (mk2) suspension. I noticed upgraded anti-roll bars front and rear with fancy droplinks, someone cared for this car once upon a time soundtrack from The Stranglers today - some* of their lyrics might not have been suitable for working with the door open but it wasn't too loud rainagain, LightBulbFun, davehedgehog31 and 6 others 9 Link to comment Share on other sites More sharing options...
scdan4 Posted May 13, 2020 Share Posted May 13, 2020 That body hanging off the engine crane shot is a defo calander shot in my opinion. Good work, please keep updating. Vince70, gm and Kringle 3 Link to comment Share on other sites More sharing options...
SRi05 Posted May 13, 2020 Share Posted May 13, 2020 I definitely want to try an MX5 before they all rust away/become £fuckinghowmuch. Still brilliant looking things Flat4, LightBulbFun and gm 3 Link to comment Share on other sites More sharing options...
Sir Snipes Posted May 13, 2020 Share Posted May 13, 2020 I've always said the mx5 would be a great basis for a kit car. The front and rear sub-assemblies look almost made for donation. I use to set the suspension.and alignment on these regularly. -1 1/2 camber all round, max castor and a smidge of toe in rear - total weapon. gm 1 Link to comment Share on other sites More sharing options...
brownnova Posted May 13, 2020 Share Posted May 13, 2020 MX5... MX5... think I might have one of those... *goes to check* Yep still there... hasn’t moved in months. Do need to get around to doing something with it. Currently sat in the corner of the drive on a space saver after one of the tyres developed severe recurrent flatness issues!! (Amongst many other things which need attention!) Your project idea looks amazing and I look forward to reading about it! sporty-shite, Coprolalia and gm 2 1 Link to comment Share on other sites More sharing options...
dome Posted May 13, 2020 Share Posted May 13, 2020 Excellent work sir! I'd be biased and say go for a seven type car, the Atomalikes don't quite do it for me. But, that's the beauty of a kit, you get to decide what you want to build and do it your way! Me, I went with the already built locost and I'm glad I did. Took me a week to decide on the shape of the new dash I made for it, imagine how long it'd take me to build a whole bloody car! Flat4, Craig the Princess and gm 3 Link to comment Share on other sites More sharing options...
gm Posted May 13, 2020 Author Share Posted May 13, 2020 cheers everyone for all of the positive comments @brownnova you should be ashamed of yourself, poor little mazda left all neglected in the corner there - watch out, I might come and nick it for parts ! tonights minor progress : I started to break down the rear subframe, but hit upon a very stuck 'long bolt' on the lower o/s wishbone - it's a bit too late to be belting things with mallets and breaking out the windy gun so it can wait for tomorrow. I decided I had better get organised while I tear the poor thing apart snacky bags ! this lot is from the shell but may come in handy later on at some stage not much more to report, cheers all loserone, BlankFrank, Tickman and 14 others 17 Link to comment Share on other sites More sharing options...
brownnova Posted May 13, 2020 Share Posted May 13, 2020 I’m hoping your progress will spur me on!! LightBulbFun 1 Link to comment Share on other sites More sharing options...
NorthernMonkey Posted May 13, 2020 Share Posted May 13, 2020 3 hours ago, brownnova said: MX5... MX5... think I might have one of those... *goes to check* Yep still there... hasn’t moved in months. Do need to get around to doing something with it. Currently sat in the corner of the drive on a space saver after one of the tyres developed severe recurrent flatness issues!! (Amongst many other things which need attention!) Your project idea looks amazing and I look forward to reading about it! I’m afraid this one hasn’t moved much this year either, mind you it’s alternator is currently on my other one which is awaiting repatriation up north from chez Bucketeer once things settle down on the travelling front. paulplom, gm and Tickman 3 Link to comment Share on other sites More sharing options...
The Moog Posted May 14, 2020 Share Posted May 14, 2020 19 hours ago, gm said: Crikey - the roll bar and coil overs are worth more than that @snagglepuss @NorthernMonkey any interest to you two ? I dont need one ... I need my one to work .. .but then a spare is always nice. You are bad people .. . Flat4, gm, Craig the Princess and 1 other 2 2 Link to comment Share on other sites More sharing options...
gm Posted May 14, 2020 Author Share Posted May 14, 2020 the car is starting to fight back - the wishbone longbolt is properly seized in the bush so will need cutting free and a new wishbone sourcing - not the end of the world but annoying. the diff was a stubborn bugger to shift too, a lot of persuasion needed to get that off the frame. time for a break before I start to lose enthusiasm The Moog, Tickman, djim and 2 others 5 Link to comment Share on other sites More sharing options...
Tickman Posted May 14, 2020 Share Posted May 14, 2020 Some serious progress going on here. gm and LightBulbFun 2 Link to comment Share on other sites More sharing options...
gm Posted May 14, 2020 Author Share Posted May 14, 2020 i had a bit of a tidy up as I was getting pissed off tripping over stuff everywhere - look at all that space now not much left now tomorrows job is to wheel that lot outside and give it a good clean up - apparently mr muscle oven cleaner is good for shifting baked on oil and gunk - I'll give it a go and report back I'm back in two minds as to which kit to build now - the GBSzero uses fewer mazda components than the Exocet which means less hassle cleaning and painting the subframes, it is a little more expensive but not by much. I shall have a few beers and a good think about it (any excuse for a beer, really) The Moog, djim, brownnova and 9 others 12 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now