Shite in Miniature II

[danthecapriman]

2 hours ago, Spottedlaurel said:

I now use AK Crystal Magic glue, but until recently I fixed 'glass' with PVA. If it's a larger moulding that includes front and rear screens, perhaps the sides too, and there's a hollow at the underside of the roof then I prefer magic tape.

I’ll have a look for that AK stuff. 
These 1:43’s can be a twat for glazing. Most of them have an individual window unit for every opening and aren’t like the older single piece glazing units so you need something that’s strong enough to hold them in but won’t ruin the plastic.

You can see it on this Sierra. Every side has a pair of pegs/rivets that hold one window section in place. Some are worse than this one! 
It makes the windows quite weak unless the glue is good, obviously once you do all this to the model you can’t do what the factory did and use the rivets.

[bunglebus]

Fairly slim pickings in the ferry last night and in a Spanish shop

Found this fake Hot Wheels in the dodgy Basildon shop by the bus station 

[Tenmil Socket]

On 30/09/2023 at 13:39, bunglebus said:

Do you remember what this was?

I’m going to get tyres fitted to my car at lunchtime not far from this shop. Would you like me to pop in and see if it’s still there?

[bunglebus]

Looks like a Dome-0 that was probably sold as a Zodiac or Midnight branded toy

Thanks

[MiniMinorMk3]

13 hours ago, danthecapriman said:

 

Cheers!
The paint I used on it is just a can of cheapo eBay metallic red motorcycle paint. I didn’t actually expect much of it but it goes on beautifully and the spray from the can is a perfect little fan pattern for stuff like this.

Ive been trying a new (to me) glue for the glazing too. I was using non blooming superglue but had mixed results with it. It’s not meant to leave that white residue behind but sometimes still does so I’ve been using Deluxe Materials Glue n’ glaze glue, which so far has been absolutely brilliant on clear plastic.

 

4 hours ago, Spottedlaurel said:

I now use AK Crystal Magic glue, but until recently I fixed 'glass' with PVA. If it's a larger moulding that includes front and rear screens, perhaps the sides too, and there's a hollow at the underside of the roof then I prefer magic tape.

I use Humbrol Clear Fix for windows, light lenses and small chrome parts. I use cocktail stick to apply it were it is needed. It is not a strong glue so will not work on structural stuff. I also use it for reattaching the cellophane windows of diecast boxes and re-sticking boxes that have come apart.

[Tenmil Socket]

2 hours ago, bunglebus said:

Looks like a Dome-0 that was probably sold as a Zodiac or Midnight branded toy

Thanks

It was gone… in fact, all of his Matchbox was sold.

[bunglebus]

1 hour ago, Tenmil Socket said:

It was gone… in fact, all of his Matchbox was sold.

No worries - I've had rather a busy morning in terms of diecasts! Where to start?

Let's have a look at some loose bits. Removed the VW and Passin' Gasser from the three pack

A job lot of mostly hot rods arrived, in part as I couldn't work out what this was - it's a Johnny Lightning 

Zylmex Mazda GT is quite a difficult casting to track down

I got some more Lone Stars too, Merc has definitely been doing some off roading in the mud going by the gunk I've clean off it

Zodiac in police guise with unlikely green interior. I really admire these, it's a real shame Lone Star weren't more successful. A range the size of Lesney's with all opening bits would have been phenomenal 

[bunglebus]

A visit to Sainsbury's this morning netted me another anniversary Majorette 

And two Matchbox 5 packs, the Japan Cruisers we saw the other day, and Coffee Cruisers V

There were other choices, another British one with the blue Mog, an off road one with a Baja I already have, or Blue Highways which was also rather nice

Taking of Matchbox, I picked these up recently too

[bunglebus]

Hot Wheels. This is pic heavy!

Two visits to Entertainer this week netted me a lot of new releases

Not entirely sold on the white wheels on this

Dodge Dart ties in nicely with the Challenger in similar colours from last year

MK1 Jag is most excellent 

E30 touring is class, shame there was only one as this needs customising

This is another fantastic release, the infamous Hirohata Mercury 

Walking into Smyths netted me a couple of premiums

And just sitting on the shelf with no proper place to be displayed, these two. I snatched them up quickly

[Split_Pin]

Sadly, hee-haw diecast in New York. Even the tat souvenir shops don't have any recent replicas of service vehicles, they did when I was last here in 2003.

Nice Hot Wheels display in Macy's but it completely failed to deliver as there were no cars on sale at all.

Some Action Drivers sets, I thought @Datsuncog may like to see these.

I did try and get into FAO Schwartz, but there was some kind of kids character even on and I couldn't  be arsed waiting in yet another line (NY has A LOT of lines to wait in) so left.

However as the Toyota Camry is by far and away the most popular car here, I ordered a decent looking 1/32 version from ebay of the latest generation.

[MiniMinorMk3]

49 minutes ago, bunglebus said:

This is another fantastic release, the infamous Hirohata Mercury 

 

There's a good write up on the history of teh most famous Kustom Mercury in teh world here.

Bob Hirohata's 1951 Mercury Custom - The Hirohata Merc - Barris Kustoms - Kustomrama

[MiniMinorMk3]

1 hour ago, bunglebus said:

 

 

Hot Wheels do sometimes make a car which is not a product of imagination, but again the transport is not correct. The team consisted of two cars one for Gurney, usually the number 48, and the 42 car was driven by Swede Savage. What a pity the Hot Wheels researchers don't get things right.

The cars and drivers competed in the 1970 Trans-Am series.

 

[bunglebus]

4 hours ago, MiniMinorMk3 said:

I use Humbrol Clear Fix for windows, light lenses and small chrome parts. I use cocktail stick to apply it were it is needed. It is not a strong glue so will not work on structural stuff. I also use it for reattaching the cellophane windows of diecast boxes and re-sticking boxes that have come apart

I bought Krystal Klear which is a non-misting glue that will actual form windows if drawn across a small opening

Every time I use it I get the nagging feeling I bought a very small and expensive pot of PVA glue

[bunglebus]

2 minutes ago, MiniMinorMk3 said:

Hot Wheels do sometimes make a car which is not a product of imagination, but again the transport is not correct. The team consisted of two cars one for Gurney, usually the number 48, and the 42 car was driven by Swede Savage. What a pity the Hot Wheels researchers don't get things right.

I wonder if sometimes it's a deliberate alteration, so as not to be a true replica, just a nod to the past. But yes sometimes I wish they'd make things as accurate as possible, like the replacement of the "Ain't no Saint" name on the Volvo P1800 Gasser. They had full permission to recreate the real car so why change things?

[andrew e]

@Split_Pin Target is your friend in NY, otherwise I found the same as you in 2023.

[bunglebus]

Look at this little beauty

Despite nearly a week in the stripper, the original green paint doesn't want to come off, particularly inside. But what a lovely casting, the Karmann Ghia can't be an easy shape to recreate but Dinky did a great job. Part of me wants to change this a bit from original, especially those white tyres. I'm not going to slam it over Fuchs but I'm tempted to go for black tyres and a nice period colour

[danthecapriman]

Got this today.

Absolutely love it! 
One of the 1:43 rally support vehicle partwork ones. Right hand drive and just look at the number plates!   
Really captures the look of the old Freight Rover I think.

[MiniMinorMk3]

1 hour ago, bunglebus said:

Look at this little beauty

Despite nearly a week in the stripper, the original green paint doesn't want to come off, particularly inside. But what a lovely casting, the Karmann Ghia can't be an easy shape to recreate but Dinky did a great job. Part of me wants to change this a bit from original, especially those white tyres. I'm not going to slam it over Fuchs but I'm tempted to go for black tyres and a nice period colour

What about some white walls?

[MiniMinorMk3]

4 minutes ago, danthecapriman said:

Got this today.

Absolutely love it! 
One of the 1:43 rally support vehicle partwork ones. Right hand drive and just look at the number plates!   
Really captures the look of the old Freight Rover I think.

I'm wondering if that was a support vehicle for the "33" Export 6R4.

 

 

[bunglebus]

8 minutes ago, MiniMinorMk3 said:

What about some white walls?

Would be nice but I can't think of anything suitable to fit the original wheels. Looks pretty good on black o-rings and the axles put above the suspension for a mild drop

[danthecapriman]

5 minutes ago, MiniMinorMk3 said:

I'm wondering if that was a support vehicle for the "33" Export 6R4.

 

 

Could very well have been. There’s another one of those vans in that series but it’s in Austin Rover livery. It has got a tow bar too so maybe it towed a trailer with the car on?

[Split_Pin]

2 hours ago, andrew e said:

@Split_Pin Target is your friend in NY, otherwise I found the same as you in 2023.

I did spot some nice long cards in a Target but none that jumped out at me.

[Split_Pin]

17 minutes ago, danthecapriman said:

Got this today.

Absolutely love it! 
One of the 1:43 rally support vehicle partwork ones. Right hand drive and just look at the number plates!   
Really captures the look of the old Freight Rover I think.

Thar looks perfect. I literally hate you for posting these up as I'll have to go to ebay now 😂 

[flat4alfa]

2 hours ago, bunglebus said:

I'm not going to slam it over Fuchs but I'm tempted to go for black tyres and a nice period colour

How about Gasser.

[danthecapriman]

1 minute ago, Split_Pin said:

Thar looks perfect. I literally hate you for posting these up as I'll have to go to ebay now 😂 

I do apologise, but just think what you’ll have when you get one!😄

[bunglebus]

10 minutes ago, flat4alfa said:

How about Gasser.

NO. That'd be like dressing your nan up in latex.

[flat4alfa]

2 minutes ago, bunglebus said:

NO. That'd be like dressing your nan up in latex.

Nan regularly dresses herself in latex, she doesn’t any help.  We have no control over the situation.

[FakeConcern]

Toy fair at Maidstone market today and not as good as I had been lead to believe with everything being a bit on the pricey side so I didn't buy anything.

 

Well not much anyway...

I started with this £4 Spot on Volvo 122 repainted in lovely bright yellow with black bonnet, rally stylee

Missing grill bumpers and sunroof, but hey, Spot On!

Next at various prices, but came to £16 for the eight

Dinky Alfa is a bit bent but may be able to straighten it out

Next Vanguards vans and a Joal CX for £9

I'm thinking Eddy will want the Vanguards.

This dealer edition Volvo 480 was pricey at £8 and will go in my C30 collection. Pressing down on the front opens the lights, I did take a pic but my hand was so grubby I deleted it!

Says AHC on the base and apparently made by Auto Pilen which is why it's so nice...

This lot ranged in price from £7 to £2 including a French cyclist model for Mrs Concern, it came to £32 but he let us have them for £28

I wasn't going to buy a couple of those but Mrs Concern egged me on...

The plastic Norev Renner 15 is a lovely one and a bit unusual I think

Lone Star Dart is a bit of a mess, but what a great shape, I'm already thinking of colours for it

I intended to pinch the wheels off this £3 Saab 9.5 for a project, but decided it's too nice to break

I think this £2 Solido Clio might be a dealer special as no makers name on the base

MIB Cinq for £1 if anyone wants it

That was everything I got in the toy fair so we had a walk around the main market

£1 each

I already have a blue and a white Mustang II, not seen a Dinky Landy with a winch before and I have a white MIB Corgi Merc from childhood so a blue one is nice too

lastly picked these out of a big box, seller wanted £7, but took £5

[FakeConcern]

I saw one of these repainted and missing the windows this morning, they wanted £8 so I left it

I'm not a big Hot wheels fan, but this Mirafiori rally set

and this Cuda set are really great!

I'll quickly update some fake projects here...

Mini Pickup was wiped down with isopropyl and the new paint seems ok now so left to harden up

Made a plasticard left hand door for the Mini Countryman, it's ok, but I may use the door from the van I got this morning

This is the Saab I was going to use the Aero wheels for

Any Saab experts on here? I've painted the Aero kit dark grey as they always look like that to me while the other plastic bits look black. Am I right about that or are they all the same colour irl? Hard to tell in photos and most are the later big bumper sloped front version 900 as well.

[bunglebus]

There's one more to find yet...