Jump to content

I've done a silly......CITROEN XM


Recommended Posts

Posted
On 4/22/2022 at 9:19 PM, greengartside said:

Sounds like you’ll need a source of parts…

3B0DCE9B-90EF-4699-9B24-43C02F061CE2.thumb.jpeg.5dff1c2c807ccc1be6c745046c8d48a8.jpeg

David Yarham Salvage - 01508 482612.

Don't suppose you know if this yard is one of the good old ones where you can turn up with a toolbox and get all the bits off the car, or is it all off the shelf stuff?

Blimey, just checked the reg and its still MOTd until October 😳 what a shame someone sent it to the scrap heap

 

Posted

WD40 is pretty good at removing sticker residue, used to use it when I had to put security seals on my van doors, just the smell of the inside of the car might annoy you a bit.

Posted

been doing some light tinkering this morning

nothing major

so the drivers electric seat seems to jam in the runner on the left hand side, if i pull it whilst operating the switch i can make it move backwards and forwards....so i can actually drive it now

can't see any issues, i've lubricated the runners to see where that leads me

also lubricated the bonnet latch so the bonnet actually opens and closes correctly

now the big thing, the rust

i think i've mostly dealt with it for now

doesn't look too bad after the rust converter has dried does it?

No description available.

so now onto the other side......little bit crispier

No description available.

No description available.

cue some wire brushing, knocking and tapping to make sure it's still solid

and then my favourite liquid

No description available.

cos i'm an idiot i forgot to take a photo but it dried as you'd expect and the metal was solid again

now, i did something that perhaps isn't the best to do on sills

No description available.

No description available.

i've painted both sides with underseal....on top of the rust converter

yes i know it's not the best idea

but the way i see it, it's some protection to the metal and it makes it look a hell of a lot better, and it should stop stone chips etc causing damage at the moment

the way i see it, those sills will last what a year, maybe 2 before they need work? i don't think this is much of a big deal

anyway

time to take a look at the rot underneath

No description available.

this is it.......

to me, that looks like one of the bumper supports?

the bumper is still on solid so i've just painted it with rust converter and going to see how it looks

the actual boot floor is solid, and i don't think that's an MOT fail, but i must admit i'm not an MOT expert

Posted

back to sleep now, got some more work to do tomorrow that i'm looking forward to

No description available.

Posted

Personally I would suggest putting some anti corrosion wax on there, it will creep into any nooks and won't trap moisture which is the risk with underseal.

Bilt hamber do some good stuff but I'm looking at using Lanoguard which is made from sheep oil (from the wool!).

Car looks fantastic, well bought.

Posted
5 minutes ago, Wgl2019 said:

Personally I would suggest putting some anti corrosion wax on there, it will creep into any nooks and won't trap moisture which is the risk with underseal.

Bilt hamber do some good stuff but I'm looking at using Lanoguard which is made from sheep oil (from the wool!).

Car looks fantastic, well bought.

Will check that out

Only did underseal as I don't plan these sills to last a few years......they won't that's obvious, so I thought, well better than nothing 

Thank you though, it's progressing shockingly fast now

Posted

I've told the garage if it's less than 350 for the remedial work to just do it, as for that price it's not worth faffing around

Never know, it may well pass.......

All lights work fine etc, brakes feel fine, just need to sort some front tyres

  • Like 3
Posted

Glad to hear the sills are sound!

At MOT time, it turned out mine weren't...

XM Sill Rot.jpg

Lashed up with lengths of electrical conduit, resin and plastic bags.

DSC_5699.JPG

More worryingly, it had a fresh MOT when I bought it...

Posted
20 hours ago, wesacosa said:

Don't suppose you know if this yard is one of the good old ones where you can turn up with a toolbox and get all the bits off the car, or is it all off the shelf stuff?

Blimey, just checked the reg and its still MOTd until October 😳 what a shame someone sent it to the scrap heap

 

It is one of the good ones where you can merrily walk around all day ☺️☺️☺️

Posted
7 minutes ago, greengartside said:

It is one of the good ones where you can merrily walk around all day ☺️☺️☺️

oh right cool.  Just need to convince the Mrs how lovely a long weekend in Norwich would be . I did manage to make our last long weekend away include a classic car auction in Runcorn but a scrap yard might be a bridge too far

Posted
2 hours ago, wesacosa said:

 but a scrap yard might be a bridge too far

I see what you did there

Posted
Just now, chodweaver said:

279167136_965092867372744_21281565207234133_n.thumb.jpg.40b1237e94ac86734a64bacfc0d9d8bc.jpg

I think that's the exit shroud for the air vent at the boot

Even less structural then

Not worried about that

Be easy to weld if needed I imagine

Posted
23 minutes ago, chodweaver said:

I need that in my life, too

It's utterly excellent

Posted

I should point out I've not done much more than replace the starter motor on the C5 before

I don't know much about fixing cars, yet I've got this far

I'm quite proud of myself really

  • Like 8
Posted

Should we challenge you to have this sorted enough to bring to shitefest now we have shitefest sorted?

Posted
Just now, beko1987 said:

Should we challenge you to have this sorted enough to bring to shitefest now we have shitefest sorted?

You never know! If it behaves then I don't see why not

I've got a road trip to do at the end of May and I'm very tempted to do it in the XM, I shouldn't and I know that I should take the C5

But I'm tempted

  • Like 4
Posted

This is almost the mantra of Club XM:

"XMs thrive on being used"

My experience has been that (almost) ALL cars thrive on being used, but what is important to stress here is that the worst thing you can do to an XM is to NOT use it.

Just saying, like

Posted
1 hour ago, chodweaver said:

This is almost the mantra of Club XM:

"XMs thrive on being used"

My experience has been that (almost) ALL cars thrive on being used, but what is important to stress here is that the worst thing you can do to an XM is to NOT use it.

Just saying, like

well i did do a questionably legal drive up the road today, it feels alright!

yes i plan to use it, around 6k a year or so......as i say C5 will still be the main car, as it's bloody good at it!

really looking forward to driving it for an MOT

Posted

i've just added the XM to my car insurance to start on the 9th May

that's quite exciting!

lets see what the renewal for multicar is

Posted

It's not silly, S1 XMs are a wonderous thing. You still need to sort the light bulbs, though 😄

Posted
4 hours ago, richykitchy said:

It's not silly, S1 XMs are a wonderous thing. You still need to sort the light bulbs, though 😄

the headlights will be sorted, very shortly

they're not the nicest of things!

but it's a wonderful car, that i'm growing more and more excited to drive each day

Posted

not too much to report today

been getting the residue off the dash from the tape that someone put there, i'm close and i reckon i should have it all off soon

i also washed and polished it!

shiny!

No description available.

No description available.

No description available.

looking a thousand times beter now!

ran it up to temp again, all was fine, exhaust hanger is broken so it has an annoying rattle but otherwise it seems to run fine

now i did notice a drop of what looked like coolant underneath it, i suspect either the water pump or thermostat housing is leaking, front right hand side

not overly worried as about a week or so after the MOT i'll be getting a belt and water pump done

oh and i pumped up the tyres

No description available.

ahh

needs a pair of front tyres then

knackered i'd say

what do we reckon, Nexen/hankook range or Michelin/conti range?

Posted

Dude, you're balls deep.  Michelin. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...