Tommy's A-series Misery - Resuming normal programming

[bezzabsa]

so you polished it yet??????

 

[Fumbler]

16 minutes ago, bezzabsa said:

so you polished it yet??????

 

Take a polishing mop to those arches and I think it'll look like Swiss cheese afterwards.

[bezzabsa]

Just now, Fumbler said:

Take a polishing mop to those arches and I think it'll look like Swiss cheese afterwards.

naw, be pure unadulterated Brummie metal under that LOL....or 4 tins of Isopon P38

[Fumbler]

Just now, bezzabsa said:

naw, be pure unadulterated Brummie metal under that LOL....or 4 tins of Isopon P38

Hmm I wonder. It still has shape to it so I can't imagine it's all that bad as Maestrontegos(TM) go.

[somewhatfoolish]

Where did the 4 speed come from for these? The 5 speed was a VAG thing of vagueness and a linkage comprising self-ejecting plastic balljoints which waited until you were at traffic lights then sprang off.

[Tommyboy12]

20 minutes ago, somewhatfoolish said:

Where did the 4 speed come from for these? The 5 speed was a VAG thing of vagueness and a linkage comprising self-ejecting plastic balljoints which waited until you were at traffic lights then sprang off.

Both are VAG units I gather. This 5 speed seems to be very firm and tight but finding first was a pig because if I went for where 1st should be I got reverse. 1st seems to be more like it's between 1st and 3rd. Maybe a hangover of an engine change?

As promised some videos! Heavily compressed so apologies if they're a bit rubbish. This was genuinely the second attempt at starting with no aids whatsoever. I had easi start and tools at the ready and didn't need them!

[ProgRocker]

12 hours ago, chompy_snake said:

You may have purchased Harold Shipman's motor ....  🤔

Shipman had a Renault Espace. 

[BorniteIdentity]

Well in.

That econometer reminds me of my early days of DJing - we had a set of lightboxes that looked like that!

I'm sorry I won't be at FotU to meet you and shake you by the hand.  This is a preposterous car and I think it's awesome.  Hopefully it'll make the July photo for the AS 2022 calendar.

[sharley17194]

itf its same as the mk1 golf unit then itll need the bushes doing, my mk1 shat its gearchange at the lights i had to pop it back on and drive home in what ever gear i found first!

2 hours ago, Tommyboy12 said:

Both are VAG units I gather. This 5 speed seems to be very firm and tight but finding first was a pig because if I went for where 1st should be I got reverse. 1st seems to be more like it's between 1st and 3rd. Maybe a hangover of an engine change?

As promised some videos! Heavily compressed so apologies if they're a bit rubbish. This was genuinely the second attempt at starting with no aids whatsoever. I had easi start and tools at the ready and didn't need them!

 

[rickvw72]

On the Mk2 golf, you adjust the linkage with a plate fitted, that locks the car in a gear, and then you do up the linkage clamp. Going into reverse instead of first a common symptom. No idea if these are the same, but I’m pretty sure it’s a similar gearbox.

My dad had a C plate estate many years ago. C608 YWK if I remember right. 1.6 engine but not high spec. He always wanted a countryman but wouldn’t have diesel, as many seemed to be. Great find, and must be impossibly rare now. 

[junkyarddog]

Of absolutely no help,but my Golf has a Montego gearbox in it😂

[Tommyboy12]

Treated the old girl to some of the finest Landsail tyres! Fitted on my driveway too.

While the tyres fitted are 165R13 the Montego & Maestro owners club states that the 1.3L was fitted with 155 tyres and the 1.6L with 165 tyres. As such I have decided to go with the slightly skinnier tyre which might help a bit with rolling resistance and the low power on offer!

[Bren]

2 minutes ago, Tommyboy12 said:

Treated the old girl to some of the finest Landsail tyres! Fitted on my driveway too.

While the tyres fitted are 165R13 the Montego & Maestro owners club states that the 1.3L was fitted with 155 tyres and the 1.6L with 165 tyres. As such I have decided to go with the slightly skinnier tyre which might help a bit with rolling resistance and the low power on offer!

I hope it doesn't handle like a TV stand.

[Burnside]

Can't add much more than has been said already about this beauty, but I do know that the one pictured is still listed for breaking below if it's of any use. 

By Phone: 01332 673663
By Fax:     01332 660430
By e-mail: [email protected]
By Post: Albert Looms Ltd., Megaloughton Lane, Spondon, Derby DE21 7ND

[Madman Of The People]

Okay, I have questions.  Seeing as how British Leyland/Austin Rover almost completely ignored the American market, my only exposure to the Maestro & Montego came from old copies of CAR, beginning in the late 1980s (all of which I still have) and the interwebs, of course.  I must have been the only kid in all of North America to have lusted after an MG Maestro Turbo!

First, I have to say that Montego estate is a magnificent looking machine!  What I really want to know is was it really worth the savings in tax to downgrade from the original 1.6 S series to a 1.3 litre A+ series?  Am I wrong in thinking the engine from a BMC Mini dragging a Monty estate body behind it must have been the slowest thing on Earth?  Did the A+ series still have the gearbox inside the sump, like the Minis?  Will you be keeping the 1.3 or do you have plans to refit an original spec 1.6 S series and it's corresponding VW gearbox?

I can't wait to see this car restored to it's former glory!

 

[somewhatfoolish]

Saves quite a bit on the VED, the monty is pretty light for its size so unless you're carrying a full load of lead ingots the performance will be adequate. The 4 speed will be a pain on M-ways and other fast roads though.

  

5 hours ago, rickvw72 said:

On the Mk2 golf, you adjust the linkage with a plate fitted, that locks the car in a gear, and then you do up the linkage clamp. Going into reverse instead of first a common symptom. No idea if these are the same, but I’m pretty sure it’s a similar gearbox.

My dad had a C plate estate many years ago. C608 YWK if I remember right. 1.6 engine but not high spec. He always wanted a countryman but wouldn’t have diesel, as many seemed to be. Great find, and must be impossibly rare now. 

From what I can remember of ours(F plate 1.6L) there wasn't any adjustment, the rods with the balljoints just popped onto(and off again at the next lights) the bellcranks; we put up with it until the new part arrived and I got quite adept at jumping out, raising the bonnet and reaching down to the linkage and reconnecting it. IIRC it sat in the 2nd-3rd plane so you could still drive with not much clutch abuse.

[dollywobbler]

1 hour ago, Madman Of The People said:

Okay, I have questions.  Seeing as how British Leyland/Austin Rover almost completely ignored the American market, my only exposure to the Maestro & Montego came from old copies of CAR, beginning in the late 1980s (all of which I still have) and the interwebs, of course.  I must have been the only kid in all of North America to have lusted after an MG Maestro Turbo!

First, I have to say that Montego estate is a magnificent looking machine!  What I really want to know is was it really worth the savings in tax to downgrade from the original 1.6 S series to a 1.3 litre A+ series?  Am I wrong in thinking the engine from a BMC Mini dragging a Monty estate body behind it must have been the slowest thing on Earth?  Did the A+ series still have the gearbox inside the sump, like the Minis?  Will you be keeping the 1.3 or do you have plans to refit an original spec 1.6 S series and it's corresponding VW gearbox?

I can't wait to see this car restored to it's former glory!

 

No, the engine is a conventional end-on gearbox layout using the A-Series as featured in the Marina and Ital, but mounted transversely. With 70bhp and good torque characteristics, they're nowhere near as sluggish as you might expect.

[chompy_snake]

That 'econometer' more than makes up for lack of tachometer on the main cluster.

I am more impressed that item works over the stereo. 

Can't see this old wardrobe being any slower than the low pressure tdi astra I had tbh. Should be more than pleasant enough on most roads unless at full load capacity.

[Austin-Rover]

5 hours ago, Tommyboy12 said:

...The Montego & Maestro owners club states that the 1.3L was fitted with 155 tyres and the 1.6L with 165 tyres.

Early Maestros came with two designs of 13" wheel rim. Oblong holes for 155 section and round holes for 165 section tyres.

Montego 1.3/1.6 Base came with 165 section tyres and thus round hole 13" rims only. Unless of course you specified the optional metric sized TD rim and tyres, in which case you got an enlarged version of the typical Metro wheel of the time with a snazzy squared off centre cap rather than a full wheel cover. These were unbelievably rare, as at launch the Montego 1.3/1.6 Base was the only model in the range to come with conventional imperial wheels and tyres and not the snazzy metric TD stuff as featured on every other model in the range.

[Tommyboy12]

14 hours ago, Madman Of The People said:

Okay, I have questions.  Seeing as how British Leyland/Austin Rover almost completely ignored the American market, my only exposure to the Maestro & Montego came from old copies of CAR, beginning in the late 1980s (all of which I still have) and the interwebs, of course.  I must have been the only kid in all of North America to have lusted after an MG Maestro Turbo!

First, I have to say that Montego estate is a magnificent looking machine!  What I really want to know is was it really worth the savings in tax to downgrade from the original 1.6 S series to a 1.3 litre A+ series?  Am I wrong in thinking the engine from a BMC Mini dragging a Monty estate body behind it must have been the slowest thing on Earth?  Did the A+ series still have the gearbox inside the sump, like the Minis?  Will you be keeping the 1.3 or do you have plans to refit an original spec 1.6 S series and it's corresponding VW gearbox?

I can't wait to see this car restored to it's former glory!

 

The engine will stay yeah. Sourcing a 1.6L would be pretty difficult unless I find a breaker car and in reality you're only gaining a few hp (86hp vs. 68hp). The 1.6 estate is 1015kg Vs. 940kg for the 1.3 saloon so it's effectively like carrying a passenger at all times in a 1.3 Saloon. I'm not worried about performance as I'm racing a 1L Citreon AX!

Gearbox wise my understanding is they are the same between the 1.3 and 1.6 but the 1.6 had 5 speeds were as that was optional on the 1.3. They actually used the inline version of the A-series to make the end-on gearbox FWD setup. So no gearbox in the sump.

The road tax is £100 a year cheaper on the 1.3 too!

[Eyersey1234]

Why is the road tax cheaper on the 1.3?  

[Dick Cheeseburger]

5 minutes ago, Eyersey1234 said:

Why is the road tax cheaper on the 1.3?  

Apparently the Welsh have a real soft spot for an A Series 1275 lump and like to show this by rewarding owners with discounted RFL. Apparently anyone considering dropping one of those heavy-breathing Rover V8s into a Montego engine bay are charged heavily and told to 'GTF boyo' if asking for cheap rates. 

[5speedracer]

Recall a mate having a 1.6 Montego of this vintage as a company car and the cambelt giving up at a junction in Galashiels. Interference engine and apparently quite common on that engine.

[Tommyboy12]

38 minutes ago, Eyersey1234 said:

Why is the road tax cheaper on the 1.3?  

Pre-2001 cars the road tax was done on engine size and there were two bands. A low one for engines below 1549cc (£170pa) and a high one for about 1549cc (£280pa). Obviously this engine swap switches the capacity and reclassifies the tax band.

[danthecapriman]

Wasn’t there also a company car tax thing going on at the time? Which favoured smaller engined cars.

I’ve read somewhere that Volvo sold significantly more 2.0 700 series cars at that time because of this, the only marginally bigger 2.3 engines were in a higher bracket so were a bit less popular for fleet buyers.

 

Cracking car btw, great to see it saved! For one of these the rust doesn’t look too bad at all, especially considering the outstanding mileage on it.

[Eyersey1234]

23 minutes ago, Tommyboy12 said:

Pre-2001 cars the road tax was done on engine size and there were two bands. A low one for engines below 1549cc (£170pa) and a high one for about 1549cc (£280pa). Obviously this engine swap switches the capacity and reclassifies the tax band.

Thanks I had forgotten it was done on engine size

[3VOM]

20 minutes ago, danthecapriman said:

Wasn’t there also a company car tax thing going on at the time? Which favoured smaller engined cars.

I’ve read somewhere that Volvo sold significantly more 2.0 700 series cars at that time because of this, the only marginally bigger 2.3 engines were in a higher bracket so were a bit less popular for fleet buyers.

 

Cracking car btw, great to see it saved! For one of these the rust doesn’t look too bad at all, especially considering the outstanding mileage on it.

2.0 litres was a line for benefit in kind, allowed mileage and tax values of company cars for many years.

[tooSavvy]

I truly felt the joy when taking a 'nosebleed inducing' dive - from 1.6 to 1.0 - and pocketing the £110 saving

*no sleepless night over the new E10 u/l too!

[adw1977]

2 hours ago, Tommyboy12 said:

Gearbox wise my understanding is they are the same between the 1.3 and 1.6 but the 1.6 had 5 speeds were as that was optional on the 1.3.

Gearbox was dependent on trim level rather than engine size.  4 speed on base models, 5 speed on everything else, but the 5 speed was an optional extra on both 1.3 and 1.6 base.

July 1987 brochure

[Tommyboy12]

42 minutes ago, adw1977 said:

Gearbox was dependent on trim level rather than engine size.  4 speed on base models, 5 speed on everything else, but the 5 speed was an optional extra on both 1.3 and 1.6 base.

July 1987 brochure

Thanks thats really interesting. Mine has been confirmed as a base model with a 5 speed by the owners club helping me decode the vin number so it must have been the only option they ticked when ordering! That and maybe the econometer although I gather thats a relatively simple retrofit