Jump to content

Autoshite chat over Zoom - 8.00pm Tuesday PM Mrs6C for details


Six-cylinder

Recommended Posts

I'm sure everybody is interested in the "lovely brown" Mokka in the carpark, so here's s picture I took of it during my lunch hour!

PXL_20210616_114901224.thumb.jpg.fde897613b2e4d8a9d6fdbde9290d7b0.jpg

Brown and browner inside.

  • Haha 1
Link to comment
Share on other sites

1 hour ago, Fumbler said:

I'm sure everybody is interested in the "lovely brown" Mokka in the carpark, so here's s picture I took of it during my lunch hour!

PXL_20210616_114901224.thumb.jpg.fde897613b2e4d8a9d6fdbde9290d7b0.jpg

Brown and browner inside.

Brown you say?

Aubergine.thumb.jpg.feff96c81657a113ff6f1c2f283f6571.jpg

Link to comment
Share on other sites

1 hour ago, St.Jude said:

Brown you say?

Aubergine.thumb.jpg.feff96c81657a113ff6f1c2f283f6571.jpg

It's metallic brownish aubergine on closer inspection. I didn't want to look like I was eyeing up a Mokka though so I couldn't make up my mind.

  • Haha 1
Link to comment
Share on other sites

1 hour ago, dozeydustman said:

Are we on for tonight? Wife and stepdaughter want to watch some girly shit so I’ll be at a loose end. 

We shall find out in about 2 minutes, I expect.

Link to comment
Share on other sites

1 hour ago, dozeydustman said:

Are we on for tonight? Wife and stepdaughter want to watch some girly shit so I’ll be at a loose end. 

Will be with you all around 8:30, just finishing dinner/tea/supper (delete as your locality dictates)

Link to comment
Share on other sites

3 minutes ago, Fumbler said:

Unacceptable.

Well you’re not getting admitted then 😛

Link to comment
Share on other sites

Good chat this evening peeps. Late night topics of discussion were 'Can you do a wheelie in a steam train locomotive?', and 'As a roadsweepers lorry works on the same principle as a Hoover (beats as it sweeps as it cleans), would it be @beko1987's ultimate vacuum cleaner?'.

 

Hope to see you again next week start time at work depending.

  • Like 3
Link to comment
Share on other sites

It was really good fun last night. Wish I could’ve stayed chatting long into the night but I got a wall of tiredness and had as ever a 6.15 alarm to wake for! 

Link to comment
Share on other sites

8 minutes ago, brownnova said:

It was really good fun last night. Wish I could’ve stayed chatting long into the night but I got a wall of tiredness and had as ever a 6.15 alarm to wake for! 

That's what wearing a sodding Invacar t-shirt will do to you!

Link to comment
Share on other sites

2 hours ago, St.Jude said:

That's what wearing a sodding Invacar t-shirt will do to you!

Don't forget there was another guilty party last night as well!

Link to comment
Share on other sites

6 minutes ago, Six-cylinder said:

Don't forget there was another guilty party last night as well!

I blame @dollywobbler for this sort of indoctrination. Countries have been invaded for less than this!

Link to comment
Share on other sites

42 minutes ago, St.Jude said:

I blame @dollywobbler for this sort of indoctrination. Countries have been invaded for less than this!

You are absolutely right, in 2018 he turned up at the FoD as an Invacar salesman, spreading the desire and selling one to Mrs6c! All the usual car sales ticks were used like just sit in it and a test drive. I imagine he even offered her a low deposit and affordable monthly payments.

P1280060 broad.jpg

P1280064 broad.jpg

Link to comment
Share on other sites

6 minutes ago, Six-cylinder said:

You are absolutely right, in 2018 he turned up at the FoD as an Invacar salesman, spreading the desire and selling one to Mrs6c! All the usual car sales ticks were used like just sit in it and a test drive. I imagine he even offered her a low deposit and affordable monthly payments.

P1280060 broad.jpg

P1280064 broad.jpg

Shocking behaviour. It just shouldn't be allowed, not in this day and age.

Link to comment
Share on other sites

3 minutes ago, St.Jude said:

It just shouldn't be allowed,

To be fair, the government did try quite hard to eradicate these from the face of the planet.  It's only because of some odd people keeping them hidden away in fields and in barns that any of them exist now.

It's actually quite surprising that a route to put them back on the road exists.  Realistically, there should just be a few in museums here and there, as a warning from history.

Link to comment
Share on other sites

8 minutes ago, Talbot said:

To be fair, the government did try quite hard to eradicate these from the face of the planet.  It's only because of some odd people keeping them hidden away in fields and in barns that any of them exist now.

It's actually quite surprising that a route to put them back on the road exists.  Realistically, there should just be a few in museums here and there, as a warning from history.

Indeed.

A house direct from the 1960's, showing in detail a kitchen with floor tiles made of asbestos, a kettle that pops it's electric cord the moment it's boiled (which was a real thing), next to a sink where the lady of the house is washing up (or was until she was electrocuted by the boiled kettle), with the Invacar parked outside the garage because the long-since dead man of the house is trapped in the Isetta he bought that had no reverse gear.

Link to comment
Share on other sites

1 hour ago, Six-cylinder said:

Don't forget there was another guilty party last night as well!

It was the moderator uniform… @chaseracerjust didn’t get the memo 😂😂

Link to comment
Share on other sites

13 minutes ago, 3VOM said:

Picture of the welding. Cleanliness could be an issue so do I just use more Baker's Fluid ?

(That's a joke by the way)

IMG_20210622_163911559.jpg

Not an expert, but on the existing panel, you should have a good 2/3cm where it's bare metal. The existing rubber/paint will melt and affect the weld.

What are you using to make the template? Cardboard?

I think the gap on the bottom right would make me think about cutting that out and starting again. 

Link to comment
Share on other sites

Indeed.  At least an inch is needed of clean metal all around the working area.  It looks like the weld has been badly affected by contamination and/or a lack of shielding gas.  It also looks like there is a fit issue there with the patch.  Can you get a photo that shows more of the surrounding area? (IE not as zoomed in).  It's not easy to see where this is.

Link to comment
Share on other sites

I have no desire to drive an I*****r but I do see them as an important oart of history and making the less fortunate independent.

How very woke of me!

  • Like 2
  • Haha 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...