Jump to content

Kiltox’s YouTube Shenanigans - 22/01/2025 - THIS MESSAGE IS BROUGHT TO YOU BY…..


Recommended Posts

Posted
Just now, GrumpiusMaximus said:

You got away with that lightly!

Yeah I’m surprised - but also not, because it drives very well indeed!

  • Like 2
Posted
5 minutes ago, Kiltox said:

No thanks ?  Is that even how that works, I know it’s a way around having dodgy seat belts etc but surely the prescribed area doesn’t change just because there isn’t currently a belt attached to the anchorage 

If there is no seat then there is no requirement for a seatbelt.

If there is no seatbelt then there is no prescribed area for your rust to exist in.

Therefore it's the same as having a bit of rust in the middle of your door or somewhere else, and as long as there are no sharp edges then it's not an MOT fail.

Having not seen the area in detail it is possible that the rust exists in an area that is within 30cm of another prescribed component in which case it would fail regardless. But for £300 just get it fixed and keep the car until 2027.

Posted
26 minutes ago, Kiltox said:

26ED5189-5999-448D-B345-91193C32F469.thumb.png.1e5ed56c47e1a9f49bb4fa33833261a6.png
Never been so pleased with a failure! ? 

I can imagine. That's good for a 200 quid motor. Clearly has been loved for most of its life. 300 for welding is a bit on the steep side though.

Posted
16 minutes ago, dc2100k said:

But for £300 just get it fixed and keep the car for 3 weeks.

Fixed that for you :)

 

  • Haha 3
Posted

That's not bad at all!

Usually front ball joints are an annual item.

Even with the shan quote from the welder that's a great result for a £200 Rover 75.

Good man!

Posted

I know welding jobs always get bigger when you get into them but £300 does seem a bit steep.

 

Good news that not much else is needed MOT wise.

Posted
Just now, Craig the Princess said:

I know welding jobs always get bigger when you get into them but £300 does seem a bit steep.

Not if it’s new sills both sides!! Pics please Kiltox. Extra points for screwdriver video! 

Posted
8 minutes ago, dc2100k said:

Not if it’s new sills both sides!! Pics please Kiltox. Extra points for screwdriver video! 

Stills taken from original video

image.thumb.png.63315b7ae291502b3df50b6f3a5ee5f1.png

image.thumb.png.51e0ebc6bbdbe1db0b47bbfe8959c414.png

 

Posted
23 minutes ago, gadgetgricey said:

Stills taken from original video

?

The answer to the question is side skirts.

Image result for mg zt side skirts

Posted

Just back from a 1000 mile round trip delivering the modern Clio and collecting April’s car. 

Thanks to @320touring for support vehicle duties making sure I didn’t get stuck in the middle of nowhere, @kinkersaab for making selling a tidy late model car even easier than selling to WBAC and @Saabnut for helping with the anonymous new vehicle you definitely don’t already know the identity of 

I am bloody knackered!

Posted

I would really like one of those 75s at some point. Will this one be roffled? 

Posted
12 minutes ago, TheDoctor said:

I would really like one of those 75s at some point. Will this one be roffled? 

Not sure what the disposal plan will be yet. I do like an AX though.... ;-)  

Posted
On 2/7/2020 at 12:29 PM, Kiltox said:

26ED5189-5999-448D-B345-91193C32F469.thumb.png.1e5ed56c47e1a9f49bb4fa33833261a6.png
Never been so pleased with a failure! ? 

 

I wish my last mot was as short as that list.

 

49501995241_07dd7ac07e_c.jpg

 

49501489463_15229a6752_c.jpg

 

At least my welding cost will be a lot cheaper than your quoted £300...

  • Haha 5
Posted
1 minute ago, Kiltox said:

Not planning on paying £300, like 

If you were local I'd have done it for £20 or something, it really doesn't look like much.

  • Like 2
Posted

Just watched while waiting to pick daughter up from school. 

Noticed that it has the webasto pre heater installed which is a great piece of kit (if it's working) but then that's something else to fix/next video

Posted

Oh does it now! How does it work? Always wanted a car with one of those and I’ve got one and don’t even know it. :D 

Posted

Basically it should work automatically in weather/temp like this.

As its a diesel that takes ages to warm up, this kicks into life below 4 degrees (I think) and you get heat virtually straight away

The heater is this bit in front of the battery, that's the exhaust vent for it,

image.thumb.png.a337056f283d815f149f31bf34b77a85.png

There is a separate pump by the rear wheel arch, but all cars I believe have wiring/pipework installed. Its just if it has these two parts as well. If not its almost plug and play.

Some of the later ones had timers in the central armrest, but believe these can also be retro fitted.

Posted

I wondered what that pipe was for but decided ignorance was bliss :D

I don't think it does work, at least not automatically - it takes a bit of time to warm up in the morning for sure....

Posted
6 hours ago, Kiltox said:

Dull update is dull, sorting out the TADTS airbag light issues

 

Top plug/cable fondling... 

Posted

Someone in the comments just noticed that the mileage decreases by 1 after the battery is off and back on - how is that even possible?!

OMG KLOCKED YO

Posted
43 minutes ago, Kiltox said:

Someone in the comments just noticed that the mileage decreases by 1 after the battery is off and back on - how is that even possible?!

OMG KLOCKED YO

Your plan to become a millionaire by clocking moon mileage cars back by an afternoon's walk has been rumbled! 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...