brownnova Posted January 12, 2020 Posted January 12, 2020 Bonus points for being debadged at the front! Floatylight 1
Floatylight Posted January 14, 2020 Author Posted January 14, 2020 noice b5.5! PD130?Yes, which@cpjitservices suspects was remapped to 180, certainly shifts.Now done 400 miles in it.Sent from my Moto G (5) using Tapatalk cpjitservices 1
cpjitservices Posted January 14, 2020 Posted January 14, 2020 39 minutes ago, Floatylight said: Yes, which@cpjitservices suspects was remapped to 180, certainly shifts. Now done 400 miles in it. Sent from my Moto G (5) using Tapatalk Yes I AM LIKING SAAB Saab needs love, but its going to get that and will be a every nice car indeed Thanks Floatylight and chaseracer 2
Floatylight Posted January 18, 2020 Author Posted January 18, 2020 Quick update!Collected the Passat a week ago, now done just under 800 miles without issue.Expenditure so far - about a tenner - indicator bulb, new key case and rear wiper blade, could also do with front blades, a really good wash, t cut & polish and a carpet shampoo, but a lovely thing to drive Not much time to do anything else but injector seal kit arrived for c4gp and established the water leaks of of the Zafira when parked, so needs sorting before I push the for sale post.Happy days!Sent from my SM-A505FN using Tapatalk cpjitservices 1
Floatylight Posted January 22, 2020 Author Posted January 22, 2020 Managed to get home early today and set a out radiator replacement on the Zafira, appears they built the car around the rad..Almost done, just need to refill the coolant, bleed and put the bumper back on then a push on the sale on here before braving gumtree /fb, some please someone buy it and save me from torture..Sent from my SM-A505FN using Tapatalk UltraWomble 1
cpjitservices Posted January 22, 2020 Posted January 22, 2020 On 1/18/2020 at 11:17 PM, Floatylight said: Quick update! Collected the Passat a week ago, now done just under 800 miles without issue. Expenditure so far - about a tenner - indicator bulb, new key case and rear wiper blade, could also do with front blades, a really good wash, t cut & polish and a carpet shampoo, but a lovely thing to drive Not much time to do anything else but injector seal kit arrived for c4gp and established the water leaks of of the Zafira when parked, so needs sorting before I push the for sale post. Happy days! Sent from my SM-A505FN using Tapatalk Sorry about the carpets.... KIDS!!! Floatylight 1
Floatylight Posted February 9, 2020 Author Posted February 9, 2020 Back to normality, Zafira sold after some issues when the fusebox filled with water. Passat in daily use for work Mazda 3 definitely has performance issues but mot sure where to start, plugs? Coil packs? C4GP needs me to get my finger out and fit the dpf thats sat in the boot for months and change an injector seal. In other news SmollFL's C3 has been off the road due to injector failure, I got a new rail and 4 injectors from the scrap yard for a tenner and the garage fitted them (it was already there as it broke down while I was away for work) replacement front hub also procured, will be goin back to the garage to be fitted.. cpjitservices 1
cpjitservices Posted February 10, 2020 Posted February 10, 2020 19 hours ago, Floatylight said: Back to normality, Zafira sold after some issues when the fusebox filled with water. Passat in daily use for work Mazda 3 definitely has performance issues but mot sure where to start, plugs? Coil packs? C4GP needs me to get my finger out and fit the dpf thats sat in the boot for months and change an injector seal. In other news SmollFL's C3 has been off the road due to injector failure, I got a new rail and 4 injectors from the scrap yard for a tenner and the garage fitted them (it was already there as it broke down while I was away for work) replacement front hub also procured, will be goin back to the garage to be fitted.. Im glad the Passat is behaving itself. Floatylight 1
Floatylight Posted February 18, 2020 Author Posted February 18, 2020 Passat MOT failure, now for sale for £250 but think I will probably end up fixing it if no takers, done 250 miles in it today after sorting the dangerous failure point and runs sweet as a nut. Also ordered a pair of tyres for the C4GP from Oponeo.. £34 each... Sent from my SM-A505FN using Tapatalk
cpjitservices Posted February 20, 2020 Posted February 20, 2020 On 2/18/2020 at 12:10 AM, Floatylight said: Passat MOT failure, now for sale for £250 but think I will probably end up fixing it if no takers, done 250 miles in it today after sorting the dangerous failure point and runs sweet as a nut. Also ordered a pair of tyres for the C4GP from Oponeo.. £34 each... Sent from my SM-A505FN using Tapatalk Thats strange, it had new drive shafts less than 6 motnhs ago for a start! I have the receipts to prove that,
Anthony Posted February 20, 2020 Posted February 20, 2020 1 hour ago, cpjitservices said: Thats strange, it had new drive shafts less than 6 motnhs ago for a start! I have the receipts to prove that, The cheap rubbers used on cheaper aftermarket stuff is often utter shite and can perish / split within a few months - ball joint covers seem to be particularly prone in my experience, but seen CV boots split in double quick time too.
Floatylight Posted February 22, 2020 Author Posted February 22, 2020 Busy morning round at BIL's changing a couple of tyres for the C4GP which was planned and and impromptu welding session on the Passat. He's quite inventive and had an excellent way of fitting tyres using some fairly simple gear.. LightBulbFun, UltraWomble, rainagain and 5 others 8
Floatylight Posted February 24, 2020 Author Posted February 24, 2020 FFS! Just coming up the street after walking the dog a notice an oil slick going down the street, looks like something catastrophic has failed on the C3 and let most of the oil out... Will try and get it to the garage tomorrow and get them to sort...Never rains etc...Sent from my SM-A505FN using Tapatalk
chaseracer Posted February 25, 2020 Posted February 25, 2020 1 hour ago, Floatylight said: FFS! Just coming up the street after walking the dog a notice an oil slick going down the street... And given your road's about 1-in-3 steep, the oil was probably going some! Floatylight 1
Floatylight Posted February 25, 2020 Author Posted February 25, 2020 And given your road's about 1-in-3 steep, the oil was probably going some!Yes, will be purchasing a bag of sand tomorrow and trying to appease the neighbour's...Sent from my SM-A505FN using Tapatalk chaseracer 1
Floatylight Posted March 10, 2020 Author Posted March 10, 2020 Today has seen two new tyres on the front of Mrs FL's Mazda 3. It turned out to have two different sizes on the front which was a worry, one was a 55 profile, one a 50... Tracking was also quite badly off which has scrubbed the inner edges pretty badly.. Used a recently opened Eurofit centre and got to say I was impressed. Also picked up a full set of Michelin's on VW steels, 2 of of which are brand new, just need to do rear brakes and get it in for its retest. Flat4, BL Bloke and rainagain 3
N19 Posted March 10, 2020 Posted March 10, 2020 On 2/25/2020 at 12:59 AM, Floatylight said: Yes, will be purchasing a bag of sand tomorrow and trying to appease the neighbour's... Sent from my SM-A505FN using Tapatalk I've recently found cat litter to be good at absorbing spills - £1.50 for a big bag of the own brand stuff at Morrisons - I have it in the garage for any oil mishaps. chaseracer and New POD 1 1
Floatylight Posted March 30, 2020 Author Posted March 30, 2020 Fleet update. Passat was back in for re MOT today after repairs being done at a leisurely pace since it failed in early Feb, sale was confirmed and waved off this evening.. With all that's going on I'll be glad of one less insurance policy and tax to pay.. The C4GP has been away for a few weeks having the offside paintwork sorted after a previous repair started rusting on the door seam and the rear quarter developed areas of orange peal. It's not really seen much use this year at all, still need to change the dpf and do an injector seal, rear tyres from Oponeo seem to be fine. Mazda plodding on, much better on new front tyres and tracking done, still think it's not pulling properly suspect a coil pack but need a better obd reader to do some proper diagnostics, will pull the plugs and do some simple checks. @Smoll Floatylight 's C3 has had a second hand injector rail, front hub and warranty replacement discs and is much better, running well. (also needed the sump.off again and resealed after the oil fell out) So what next? Smollest is 17 in a couple of months and I've been on the lookout for something for him, I've found something which fits the bill perfectly.. 24 years old almost 300k miles, n/a diesel, been off the road since 2017, needs a bit of sparkly stick.. Perfect! (And free, courtesy of one of[mention=207]chaseracer[/mention] 's friends) just need the current chaos to subside and enlist some help to get it here! Sent from my SM-A505FN using Tapatalk DVee8, LightBulbFun and cpjitservices 3
Floatylight Posted March 31, 2020 Author Posted March 31, 2020 Passat taken off insurance and C4GP removed and sorned, total tax and insurance saved per month = £140.Sent from my SM-A505FN using Tapatalk Flat4 and cpjitservices 2
Floatylight Posted April 29, 2020 Author Posted April 29, 2020 Looking through some old photos and found some of my old J plate Cavalier 1.7TD GLS which I had from 1994 -2000 and have done the most miles in so far, did 107k in it, ending at 197k pic is of it about to go on a low loader as a part ex (with a cracked head) for the most expensive car I ever bought - a 2 year old Passat Tdi..Sent from my SM-A505FN using Tapatalk jumpingjehovahs and Robson3022 2
Floatylight Posted May 30, 2020 Author Posted May 30, 2020 One incoming for Smollest first car Full story later..1.9l d.Out of MOT 2017 but had it driving this morning..Free cars are the best cars!!Being delivered by Ceri on Tuesday!Sent from my SM-A505FN using Tapatalk ProgRocker, Dirk Diggler, Coprolalia and 11 others 14
Floatylight Posted May 30, 2020 Author Posted May 30, 2020 The story of the 306...Some time ago I was talking to SmollestFL about his ideal first car, after consideration of some frankly ridiculous ideas he said a Pug 306 would be great and he had great memories of ours when he was growing up, I started looking round but never sorted anything as I needed as insurance slot and some drive space.Some time later@chaseracer posted on fb about updates on his 2cv racer project and one his non car friends made a comment about of they needed any parts he had a 306 languishing on the driveway that he could have..I contacted Dave who introduced me to Oli who had the 306 and discussions took place, pictures were sent and a plan started to come together.Oli's Dad bought this 306 1.9L D new in 1995 and it became Oli's in 2005 and he used it as his daily until 2017 when a Golf took over.Ot was clear that the 306 needed some work, mainly some welding around the near side c pillar and inner wheel arch.We agreed to take the car on when things allowed some months ago and put it on the back burner.SmollestFL was 17 this week and his Birthday was a bit flat due to lockdown so I suggested we go and have a look today, armed with some basic tools a battery and a tyre inflator we set off the 60 miles to where it is.Within 30 minutes we had got the charged battery in, tyres were inflated and fluid levels checked.Following a short amount of mucking about with an alarm/immobiliser the correct dash lights lit up, the glow plug light went out and with a turn of the key it turned over and fired then died, a quick squeeze of the primer bulb, span it over again and it fired and ran quite happily, once warmed up I shunted it back and forth and freed the brakes off and SmollestFL drove it up and down the lane, it continued to run up to proper operating temperature while we drank tea and had a lovely chat, we left the car which will be collected shortly and delivered to us and we can start work on prepping for an MOT.So far plan is:-Welding & BodyworkNew tyres / maybe alloys & tyresOil & FiltersCambeltCheck over brakesPower buff and polishNice to do's:-New steering wheelReplacement stereoTry and pull out a few dentsSmollestFL is over the moon as is Oli and Mrs Oli who were really happy that it will live again, they really couldn't face ringing the scrap man..Further note:-Whilst Oli is not a member he was aware of AS and used to have a Peugeot 104 which @nigel bickle took on.Sent from my SM-A505FN using Tapatalk BL Bloke, Tickman, Dirk Diggler and 14 others 17
Floatylight Posted May 30, 2020 Author Posted May 30, 2020 Update -@worldofceri is delivering it on Tuesday!Sent from my SM-A505FN using Tapatalk worldofceri, dave j, The Moog and 1 other 4
320touring Posted May 30, 2020 Posted May 30, 2020 A strong start by smollestFL now all you need is that turbo XUD further down the page and he can get boosting! loserone 1
Floatylight Posted May 30, 2020 Author Posted May 30, 2020 A strong start by smollestFL now all you need is that turbo XUD further down the page and he can get boosting!More than enough umph for a over exuberant testosterone overloaded teenager!Sent from my SM-A505FN using Tapatalk paulplom and chaseracer 1 1
brownnova Posted May 30, 2020 Posted May 30, 2020 1 hour ago, Floatylight said: Update -@worldofceri is delivering it on Tuesday! That’s at least 2 Shiter deliveries he’s doing next week! The 306 I had still stands as the least favourite car I’ve ever owned... other people love their 306s so ill say it was down to the one I had. That said they are good looking things, and I’d probably have another ?? Floatylight 1
Ghosty Posted May 30, 2020 Posted May 30, 2020 That's a winner. 306s are good cars, I liked mine. But it just didn't do well as being an estate, and I'd got it as a bike carrier so I got rid. The C-pillars on these rot from the inside out (I think it's to do with the sunroof drains), take the trim out on the inside aand check for well hidden rot. You don't want to pull one of the seatbelt mountings out and fail an MOT. Floatylight 1
Floatylight Posted May 30, 2020 Author Posted May 30, 2020 That's a winner. 306s are good cars, I liked mine. But it just didn't do well as being an estate, and I'd got it as a bike carrier so I got rid. The C-pillars on these rot from the inside out (I think it's to do with the sunroof drains), take the trim out on the inside aand check for well hidden rot. You don't want to pull one of the seatbelt mountings out and fail an MOT. It is a bit crispy in that area and will defo need some welding to get it MOT worthy..Sent from my SM-A505FN using Tapatalk
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now