Shite in Miniature II

[stuboy]

[Tenmil Socket]

This reminds me of the stance crew

[MiniMinorMk3]

3 minutes ago, Tenmil Socket said:

This reminds me of the stance crew

That reminds me of lots of pain in my foot getting out of bed after not putting my toys away first!

[Tenmil Socket]

Just now, MiniMinorMk3 said:

That reminds me of lots of pain in my foot getting out of bed after not putting my toys away first!

Ever stood on one of the little orange traffic cones… that’s pain!

[bunglebus]

Mahoosive haul today

[Tenmil Socket]

Can anyone advise what is the best stuff to use to stick to a die-cast shell that will set hard and be workable i.e. sand it down?

I’d use wob but it sets too quickly.

 

[bunglebus]

You can buy modelling filler but I always seem to have problem with tiny holes in the finish when I use it. 

could try that stopping filler/knifing putty stuff maybe?

[Tenmil Socket]

2 minutes ago, bunglebus said:

You can buy modelling filler but I always seem to have problem with tiny holes in the finish when I use it. 

could try that stopping filler/knifing putty stuff maybe?

Thanks. I have an idea for something I’ve  wanted to do for a while but was never sure what to use. 
I was thinking of the brown stuff car manufacturers use for prototypes.

[Split_Pin]

1 hour ago, bunglebus said:

That's why we sacked Dunton off - it's massive but not in an especially wealthy area. 50% are market traders too

This is exactly what I find with Falkirk car boot sale. Last week was an exception with the 1/18 cars but normally as Sierraman said its just rubbish on a detour to the bin. The organiser even admitted on the Facebook page that market traders get priority when booking and setting out. I'd never even dream of selling there now.

[MiniMinorMk3]

1 hour ago, Tenmil Socket said:

Can anyone advise what is the best stuff to use to stick to a die-cast shell that will set hard and be workable i.e. sand it down?

I’d use wob but it sets too quickly.

 

Or one of the other epoxy modellers putties. Magic Sculp does not harden for 2 hours, so it gives you plenty of time to move it around.

More info here

Epoxy modelling putty – Your guide to model making & sculpting putties (sylcreate.com)

 

Another one is Milliput. I've used the standard version in the past for white metal and resin modelling.

Milliput - The epoxy putty with a thousand uses in modelling, DIY and industry

[egg]

1 hour ago, bunglebus said:

You can buy modelling filler but I always seem to have problem with tiny holes in the finish when I use it. 

I use Humbrol model  filler with mixed results.

https://uk.airfix.com/products/31ml-model-filler-tube-ae3016

[bunglebus]

Cor that Hot Wheels Anglia is going to be amazeballs

[stuboy]

7 hours ago, Tenmil Socket said:

This reminds me of the stance crew

anyone id the make......... and no not volvo neither before anyone replys

[bunglebus]

Unfortunately there are absolutely no clues on the base whatsoever 

[flat4alfa]

modelling putty just shrinks too much when I use it

15 hours ago, stuboy said:

anyone id the make......... and no not volvo neither before anyone replys

Zee Toys D84

Copy of the Majorette edited due to bollocks.

[Split_Pin]

28 minutes ago, flat4alfa said:

Zee Toys D84

Copy of the Majorette

I have both the Majorette and the above and would never have guessed its an upscaled copy!

[flat4alfa]

Maybe it isn't.  I've not had them together in my hands to compare properly so assume I'm talking shite for now as it came from someone else

Could you do photoshoot of the pair together to settle it?

[flat4alfa]

23 hours ago, MiniMinorMk3 said:

Saarbrücken.

That explains it.  The Saar has been in and out of France over the years.

Quote

After the economic union with France was established and the French franc was introduced on November 20, 1947, the first new motor vehicles were purchased for the Saarland police. They were all of French origin because they were up to 30 percent cheaper than the corresponding German models [https://www.saar-nostalgie.de/Polizeifahrzeuge.htm]

The influence continued 

[bunglebus]

1 hour ago, flat4alfa said:

Zee Toys D84

Copy of the Majorette

Definitely much bigger, somewhere in the 1:43 region I'd say

[bunglebus]

On 30/09/2023 at 13:46, bunglebus said:

On the end next to the fake Maisto caravan

[flat4alfa]

Yeah, more likely (if a copy at all) it would be the Polistil 1:40.  Doesn't look like it though

The Majorette 1:64

Verdict: shite.

[MiniMinorMk3]

Another 404 today, this time from Vitesse. Not as good as the IXO version, but then was half the price back in the 1990s

The sides look a bit flat and the sills a bit deep.

From the back there is not much of a peak to the roof at the top of the screen

Oddest bit is the body colour headlamp rims. 

Also found in other colours and Safari Rally versions.

[andrew e]

I walk pass a traditional independent dept store on my lunch time walk at work, and today I pooped in for a mooch…. Which turned into a quick coffee..   which turned into a bap and a cappuccino… 

It was particularly nice actually!

Of course I think - might as well have a look in the toy section whilst I’m here….…..

You can guess the rest 😂

So those 6000 steps ended costing £18 after all that….  sandwiches and sofa be safer and cheaper tomorrow 🤣

[bunglebus]

What have we here Mr. Postman?

An American Editions 33 Willys for a start. There are a couple of variations on this one, mainly black or silver bases - I managed to ruin my silver base while trying to clean a mark off the roof, which irritated me enough to buy this one. I had the black base version when I was young so it has a special place in the collection 

Next up, an Alme Pug 604. These are a bit of an oddity, often resembling better known makes such as Majorette. 

Lastly, recent discussion of Lucky lead me to finding another version of the Gruesome Twosome clone. Has a pull-back motor in this one

[FakeConcern]

6 hours ago, andrew e said:

I walk pass a traditional independent dept store on my lunch time walk at work, and today I pooped in for a mooch…. Which turned into a quick coffee..   which turned into a bap and a cappuccino… 

It was particularly nice actually!

Of course I think - might as well have a look in the toy section whilst I’m here….…..

You can guess the rest 😂

So those 6000 steps ended costing £18 after all that….  sandwiches and sofa be safer and cheaper tomorrow 🤣

Couldn't help thinking of this...

Soz.

[danthecapriman]

Ok, so the brake fluid had limited effect on the Dinky Transit van. It is working and paint has come off, it’s just so slow!

So, I’ve invested in a (hopefully!) more potent weapon to wage war with.

I’ll give it a go later and see. If it’s any good it’ll be coming in handy for another project I’ve got coming! Which will certainly need stripping of its current paint job.

[danthecapriman]

1 hour ago, danthecapriman said:

Ok, so the brake fluid had limited effect on the Dinky Transit van. It is working and paint has come off, it’s just so slow!

So, I’ve invested in a (hopefully!) more potent weapon to wage war with.

I’ll give it a go later and see. If it’s any good it’ll be coming in handy for another project I’ve got coming! Which will certainly need stripping of its current paint job.

Pics to follow, 

But I can confirm this is good shit! Sprayed it on and the old paint is shrivelling up and falling off within seconds. 
Says to leave it for 15 minutes so we’ll see, but it’s looking good.

Edit;

Thats after it’s had a coat and stripped most of the outside, then flipped over and the inside done. Definitely better and much quicker than brake fluid.

[bunglebus]

@egg put me onto this via Facebook marketplace. Another Midnight diecast, seems various different brands ended up imported and boxed up for sale in the UK (and maybe elsewhere)

Mk1 Space Kadett isn't one I've seen before. Doors are best described as an approximate fit, wheels poke out unnecessarily (and one fell off when I unboxed it), even the KADETT rear number plate is cast in wonkily!

Don't recognise the brand on the base but at least it has one 

[flat4alfa]

4 hours ago, danthecapriman said:

I’ll give it a go later and see. If it’s any good it’ll be coming in handy for another project I’ve got coming! Which will certainly need stripping of its current paint job.

AUTOTEK PAINT STRIPPER 500ML
ACETONE 10-30%
DIMETHYL ETHER 30-60%
ODOURLESS KEROSENE 1-5%

https://www.partinfo.co.uk/files/atooops500 sds.pdf

[Snake Charmer]

4 minutes ago, flat4alfa said:

AUTOTEK PAINT STRIPPER 500ML
ACETONE 10-30%
DIMETHYL ETHER 30-60%
ODOURLESS KEROSENE 1-5%

https://www.partinfo.co.uk/files/atooops500 sds.pdf

Ideal for that cheating spouses car, much better application rate and you can use two cans at a time.