Jump to content

Daihatsu Fourtrak Project - Gone full frontal!


rickvw72
 Share

Recommended Posts

Hi all, I’m going to try to keep this updated as a diary of work done on my old Fourtrak. 
I bought this a few years ago but have only recently got going on it properly, with several other projects on the go, times been scarce.

Ill start with the main job, the rear crossmember. When I bought the truck this tube had snapped on the drivers side. This ruptured the brake pipes, and ruined all the already tired suspension bushes.

So, out with the crossmember...

The original is round tube, the new 3mm wall box section, it actually holds the anti tramp bars. 

Yes the Fourtrak has a 5 linked rear suspension, and an LSD. Because race car!

I didn’t take many pics at this time, so I’m trying to improve this and maybe a thread will motivate me to document it. 

 

87AE4CD6-4F0C-48E0-BAD7-048FE0564B10.jpeg

ABD9DAF6-1B35-4EE7-8475-5F6F23786897.jpeg

1D4AE3C7-5286-455E-AC4E-5EA6A30CABC4.png

Link to comment
Share on other sites

To the front of the spring mount you’ll see a hole, to access the crossmember.

This was next up for repair. Cut out, welded and ground back, then Zinc primed. Inside all the repairs Is some zinc spray too.

About now was when I started to scrape all the barnacles, manure, rust and loose sealer from the underside. As the underside cleaned up, and more and more holes were sorted and primed, progress was being made.

Ill trawl my old pics so you can see what this looked like originally, there was a farmyard worth of shite on this, mud sever inches deep at this point.

Bits removed are this point- rear axle, rear suspension arms and tramp bars, under guards, prop, fuel tank and filler neck Shiz, rear bumpers, literally the worlds most hardcore tow bar, rear bumpers, Entire interior.

Theres a theme developing. If it’s made of metal, it needs welding. 

8C2A356C-0BAD-4A3A-9923-6FBF86197BC4.jpeg

C2C852A0-F3AC-497E-98BF-439762A1B739.jpeg

D180DD03-4028-4CD9-AC67-5CA87AB18AD6.jpeg

Link to comment
Share on other sites

Mines not been tested in a few years, but there’s many still going on farms. 

It’d be interesting to find out for sure, but I think they’d be more survivors on sorn but used off-road or registered limited use, than there is taxed - tested.

Most the farm ones will never see another MoT, this one should though! 
 

Link to comment
Share on other sites

My uncle bought one on a v plate brand new. I hated it, he loved it.

Years later a mate had one and loved it, he said it would pull anything. It literally snapped in half one day though. He sold it for very good money.

Owners absolutely love them.

 

Link to comment
Share on other sites

Okay, so as I’m ahead of progress to where this thread is, I can update further.

Fuel tank - this has weeping seems, and needs a look at. Any shiters experienced with a tank sealer? 
 

The next work done was the rear trailing arms, these had bushes replaced with poly, and the spring seats were repaired, before a coat of rust oleum combi colour. 
 

All the rust was ground away with various wire wheel grinder wheels, and rust converted with Bilt Hamber Hydrate 80. This stuff is immense.

 

6C7352AE-21F4-463F-9E6A-153FEA630F8C.jpeg

42BA4C3C-10A0-42AD-86DC-F81FB389EE83.jpeg

46F5782B-A77C-4700-8527-AE669E80707D.jpeg

F5A8A345-3A1E-45D4-8970-23F4338EF408.jpeg

8A83908D-7F0F-433F-A946-01A0D57C1C70.jpeg

Link to comment
Share on other sites

With the rear chassis welded, and the arms done, the rear axle could go back in to make it roll. 
 

This was fitted but not fully done up. 
The plan is to remove it again to treat the whole underside with an underseal or similar. 
 

Before this there’s other rust to sort, you can see some of the treats in store in the arches from these pics already. 

Close up pics to come, when I can bare to look at them myself! 
 

So, for the first time in a while, the beast was on four wheels, and was movable again.

863CA737-3B0C-4CE4-A739-A992172B7FF6.jpeg

03A89983-C964-4491-A9BB-035EB9F065C3.jpeg

929816CE-3115-4712-806C-F583F6DA6535.jpeg

D35056D1-3B64-4D86-BAAD-DBE4D00F736C.jpeg

Link to comment
Share on other sites

2 hours ago, rickvw72 said:

Fuel tank - this has weeping seems, and needs a look at. Any shiters experienced with a tank sealer? 

Yep, I used the kit available that cleans, treats and seals the tank.

It was really straightforward and easy enough to do methodically.

Can't remember the name but it will come up in a search. They seem to be aimed at motorbikes more than cars.

Link to comment
Share on other sites

'Kinell.  Good job it's got a separate chassis or it would have folded in half by now...

I've had three Fourtraks, two LWB petrols and a SWB diesel, but they were all Mk1s with beam axles and cart springs.  I did drive a TDS Independent once and was quite impressed.  Haven't seen an MOT'd one for sale for a while though.

Link to comment
Share on other sites

  • 2 weeks later...

Cheers for the fuel tank experiences.

Progress is slow this week, as I’ve got two of my fleet mot tested and cleaned up ready for sale.

I also bought another car. Taking me to a nice even ten. Oops. 
 

Turned the beast around though, next jobs are to replace the rear body mount, and rebuild the floor and inner arch. When this is done I reckon I’ll be about a quarter of the way through welding it up! 
 

1B6A0010-C902-4002-B3EE-A8B370FFD7E0.thumb.jpeg.e59c2746ae3bc54b7cdc2fe19ec69f8d.jpeg
 

I do love this monstrosity! Maybe too much. It’s rather fucked.


255D7324-7F0F-4051-BF88-67BFE7D5235B.thumb.jpeg.ee4afd3aba96c7762c61f6468685bcfe.jpeg

Link to comment
Share on other sites

47 minutes ago, MJK 24 said:

Is T reg considered to be a late model?

Separately, were Daihatsu part of Toyota or am I making that up?!

I think they made them too 2002, which makes mine fairly late.

Im pretty sure Daihatsu is a subsidiary of Toyota, same way as is Lexus.

Ive been told that the Fourtrak chassis is almost a land cruiser 70 or 80. I wonder how similar the mechanicals are, for example the Land Cruiser has a 4.2 straight six, this a 2.8 straight  four.

Link to comment
Share on other sites

  • 4 months later...

Realistically last update for the year, thought after 5 months it’s time, and threads that go cold with this sort of job often seem like they got abandoned.

Truth being, I work In education, and since last update, work got a bit mental.. 

097ACC00-E441-4C11-B807-0045ADD8457C.thumb.jpeg.1e663a01ec499c689d4311be978b825a.jpegBack to the Fourtrak. 
 

More and more lumps of metal have come out, sound metal found eventually though. So I thought.

95308D4C-BFEC-4537-BC51-FE6B45D1F7A2.thumb.jpeg.8d96ff7b9f5ce674cdbd918fe6c8e5df.jpegWhat a turkey. 
 Chopping all this out was great. So great the inner sill couldn’t wait so fell off all by itself. Bugger.

Then a couple of months of work, Covid, catching Covid, work etc got in the way of progress. So a tidy up was in order.

17E6B450-9433-4159-B98F-6415EC427AE6.thumb.jpeg.84f9c0845e6b7b1de19d2da05df964c5.jpegThe old crossmember, which has the tramp bars fused to it, was chucked in the back, till more time was available. This was a great idea, as the sharp bit punched its way through the rear body mount, which promptly collapsed.

So by this point I have a car with half the floor out, the sills falling off by themselves, and the body mounts collapsing.. essentially, I think the gearstick was holding the body on.

There always comes a point where a decision has to be made....

 

 

After a short, soft think, clearly I’m gonna weld it up. 
Several smaller jobs are underway at the minute, hoping to get the welder out in the Christmas holidays if I get some free time. 


Will 2021 be the year it rides again?

Link to comment
Share on other sites

Great thread, please keep up the good work...!  Quite a few of these on farm patrol duties round these parts, always well loved vehicles.  I've read that the engine is a licence-built version of the Toyota lump that's in my old Hiace... Not quick, but pull your house down if you wanted!  

Great to see this level of welding/fabrication, 99.678/10... would read again!

Link to comment
Share on other sites

I had an R plate one a few years back, 2.8 TDX 7 seater, was a lovely dependable thing, not fast but solid and charming. It had been touched with a sparkly stick on the sills both sides at some point but was really tidy. Did two years worth of green laning in it and then sold it on. Miss it nowadays as it was cheap fun.

Link to comment
Share on other sites

  • rickvw72 changed the title to Daihatsu Fourtrak Project - Gone full frontal!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Similar Content

    • By juular
      Old car - check
      Full of rust - check
      Siezed engine - check
      Cheapest on the internet - check
      Bought sight unseen - check
      No space for it - check
      Poo count - 1.5
       
    • By 320touring
      A long time ago, in a galaxy far away, The Burd and I went to see the Skizzer to start getting a MK1 Golf Convertible that had been off the road for 10years..
      After a couple of sessions in deepest darkest Wales , coupled with some sterling help and fettling by Skizzer himself, it was time for us to head down and bring the thing back up.
       
      This went well:
      New tyres were procured and fitted

      The in-game tank pump was pulled out and a new filter fitted

       
      Then I got in touch with my Inuit side, using brand new* magnets to undertake "tank shite" fishing


      A full check over and a couple of test drives showed it fit to play.
      We set off for sunny Oswestry, only to have both front calipers sticking after 120 miles. Some water and time to collect down saw them free off and cause no further problems.
       
      Upon getting just past Tebay, it started running rough - nicking into Todhills rest area and luzzing in 10L of fuel had it running bang on for the next 70miles before it died.
      This was the final scene on the way home.

      I got to bed at 00:45, and left it to sit until today.
    • By SiC
      So to recap. After a painfully long time (well a month) I finally bought a MGB GT.
       








       
      I've always fancied one and after seeing one at a local garage (which turned out to be a bit shit) the urge sprang up again. Anyway after a lot of searching I ended up with this. Seems pretty straight and underneath don't appear to not been welded too much. Worst point that I've found in the leaf spring mount. I'm not going to cover all the different things and stuff just yet as its already in the thread, so I shouldn't make this too long!
       
      I've not owned a car this old and never something with a carburettor. So I don't quite know what I'm doing with a lot of this, and will have plenty of questions! Part of the reason why I bought it was so I had something that I could fiddle with and learn on. As the other thread got a bit long, I thought it would be a better idea to split and start here.
    • By cobblers
      Right so! I was looking to lease an EV through the business, but completely failed due to hating new car dealers, hating touchscreens and eventually settling on a hybrid which is out of stock until mid-late 2022. 
      So I gave up and decided to get a Land rover. I failed at that too, after my mate sent me a link to the advert for this on ebay, at about 9pm. Ten minutes later I had arranged to drive down to see it the next day.

       
      I'm a glutton for punishment, and I really miss my last t25 so it was pretty inevitable that I'd buy it. It was more money than I'm used to spending on these, but overall I was pleased with the deal.
      A dawn raid by our very own @worldofceri had it delivered on Friday morning:
       






      It's a Swedish van originally, and was imported in 2006. Incredibly solid, never been painted and a fantastic "worn in" look. It's a 2.1 "DJ" engine which is pretty healthy but as usual is weeping coolant from various places, they all do that sir. A friend has a rebuilt engine on his shelf so I budgeted that into the purchase - We'll see how it goes.
      Totally original other than someone put some mega Fox/Gowesty suspension on it, proper mega bypass shocks with external reservoirs and stuff, so I reckon I can probably take it off jumps or something. I won't.
      My plans are to (after cleaning the filthy interior) to just run it about, more or less as it is. It would benefit from a set of tyres - these are worn very ridged on the fronts that makes it even more noisy and harsh to drive, and has no spare wheel.
      I've rotated the tyres so now the front ones are smoother, we'll see how I get on. I do need to source another matching wheel for a spare as these are full time 4wd so you need to keep the tyres rotated regular and within a very similar tread depth. look - there's even a sticker telling you to:

       
      I really need to get some new number plates for it! If anyone knows a place who could make some OE style ones with that font all the VW dealers seemed to use in the 1980s, that would be grand - I want some with the dealers logo putting on the bottom:

       
       
    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
×
×
  • Create New...