Tadhg Tiogar Posted May 25, 2019 Share Posted May 25, 2019 Makes my CX's dog's dinner electrics look like very small beer! Link to comment Share on other sites More sharing options...
Bfg Posted May 25, 2019 Share Posted May 25, 2019 Ouch, I feel for you. My first thought on seeing that camshaft wear was the tappets must be hydraulic auto adjusting types ..but clearly seeing the nuts on the rocker arms that is not the case. So someone has previously adjusted the gap (to keep things quiet) and ignored the state of the camshaft, or else it has worn in a very short time ..which indicates oil feed issues.? Have to say - I love how when faced with such a situation, you turn around and talk casually about radios - Good on you Six-c. I do hope you have good fortune in finding a decent head and camshafts for the Gamma. ..must admit though out of your fleet - I most like your MGB and the Vitesse. That might be an age thing with me, or else a hankering for the simpler things in life. Best regards, Bfg. Joey spud 1 Link to comment Share on other sites More sharing options...
Six-cylinder Posted May 25, 2019 Author Share Posted May 25, 2019 36 minutes ago, Bfg said: Have to say - I love how when faced with such a situation, you turn around and talk casually about radios - Good on you Six-c. I do hope you have good fortune in finding a decent head and camshafts for the Gamma. Bfg. I always have a lot of car stuff on the go so there is always something to go wrong, it reminds me when Agent K from the Men in Black film said “There's always an Arquillian Battle Cruiser, or a Corillian Death Ray, or an intergalactic plague that is about ..... Bfg, brownnova, chodweaver and 1 other 4 Link to comment Share on other sites More sharing options...
Andyrew Posted May 26, 2019 Share Posted May 26, 2019 Mrs6C and Six-cylinder 2 Link to comment Share on other sites More sharing options...
Six-cylinder Posted May 26, 2019 Author Share Posted May 26, 2019 Thank you well done. Link to comment Share on other sites More sharing options...
somewhatfoolish Posted May 27, 2019 Share Posted May 27, 2019 On 5/25/2019 at 10:43 AM, Six-cylinder said: I always have a lot of car stuff on the go so there is always something to go wrong, it reminds me when Agent K from the Men in Black film said “There's always an Arquillian Battle Cruiser, or a Corillian Death Ray, or an intergalactic plague that is about ..... More a case of the Jatravartids and an unexpected shortage of deodorant. Link to comment Share on other sites More sharing options...
Andyrew Posted May 27, 2019 Share Posted May 27, 2019 Does anyone know what model the wheel trims are From? They say Michelin and 15" on the edge. Gs maybe? Link to comment Share on other sites More sharing options...
Tadhg Tiogar Posted May 27, 2019 Share Posted May 27, 2019 8 minutes ago, Andyrew said: Does anyone know what model the wheel trims are From? They say Michelin and 15" on the edge. Gs maybe? That does look like a GSA-style wheel trim. The photo of the panels laid out looks like a "build your own Visa" kit. Andyrew 1 Link to comment Share on other sites More sharing options...
Andyrew Posted May 27, 2019 Share Posted May 27, 2019 Bingo Link to comment Share on other sites More sharing options...
Six-cylinder Posted May 27, 2019 Author Share Posted May 27, 2019 All this Visa/ GSA stuff is up for grabs by anybody who can make use of it. Link to comment Share on other sites More sharing options...
dean36014 Posted May 27, 2019 Share Posted May 27, 2019 Would the door fit a c15 van or are they different? Link to comment Share on other sites More sharing options...
Six-cylinder Posted May 27, 2019 Author Share Posted May 27, 2019 I can see why it would not fit but all the trim stuff will be wrong. Link to comment Share on other sites More sharing options...
Six-cylinder Posted May 27, 2019 Author Share Posted May 27, 2019 Mrs6C is trying to put the boat trailer tyres up to 60 psi and all 5 gauges we have read different. She is going to take the wheels as they are off the trailer to Tesco and use their machine. For the future I need an accurate calibrated tyre pressure gauge without spending a fortune on a motor sport one, any suggestions? Mrs6C 1 Link to comment Share on other sites More sharing options...
dean36014 Posted May 27, 2019 Share Posted May 27, 2019 How much would the door be please? Link to comment Share on other sites More sharing options...
Six-cylinder Posted May 28, 2019 Author Share Posted May 28, 2019 21 hours ago, dean36014 said: How much would the door be please? Sorry so busy thinking about tyre pressures I missed you, it is free. Link to comment Share on other sites More sharing options...
dean36014 Posted May 28, 2019 Share Posted May 28, 2019 Is it at yours Chris or elsewhere? Link to comment Share on other sites More sharing options...
Six-cylinder Posted May 28, 2019 Author Share Posted May 28, 2019 Yes I have it. It is at the field but I can bring it to the house. Link to comment Share on other sites More sharing options...
dean36014 Posted May 28, 2019 Share Posted May 28, 2019 I'll have to arrange to collect it one weekend. Won't be this one though unfortunately as its the citroen show at coventry this weekend. Link to comment Share on other sites More sharing options...
hairnet Posted May 28, 2019 Share Posted May 28, 2019 have a look at machine mart or similar and buy a branded one similar to the one on the far right sealey or something like that https://www.autoexpress.co.uk/accessories-tyres/36242/best-digital-tyre-pressure-gauge-2018 Link to comment Share on other sites More sharing options...
Six-cylinder Posted May 28, 2019 Author Share Posted May 28, 2019 The only one I could find that stated a calibration is a Sealey TST/PG2 + or - 1% for trucks, £70 is just too much for a tyre pressure gauge. What I have ordered is this Sealey at £13.75, but no calibration given. Link to comment Share on other sites More sharing options...
SiC Posted May 28, 2019 Share Posted May 28, 2019 I reckon try a motorcycle accessories shop. Many bikers are super careful with their tyre pressures, as it affects handling a lot. They should know what's good and what is not. Link to comment Share on other sites More sharing options...
SiC Posted May 28, 2019 Share Posted May 28, 2019 But to be fair, a tyre pressure gauge with a certificate and accredited to UKAS wouldn't seem too bad for £70. It would be a precision instrument after all. Eddie Honda and The Moog 2 Link to comment Share on other sites More sharing options...
Noel Tidybeard Posted May 28, 2019 Share Posted May 28, 2019 On 5/27/2019 at 4:17 PM, Six-cylinder said: Mrs6C is trying to put the boat trailer tyres up to 60 psi and all 5 gauges we have read different. She is going to take the wheels as they are off the trailer to Tesco and use their machine. For the future I need an accurate calibrated tyre pressure gauge without spending a fortune on a motor sport one, any suggestions? this old hector won autoexpress previously old hector Mrs6C 1 Link to comment Share on other sites More sharing options...
Mrs6C Posted May 28, 2019 Share Posted May 28, 2019 On 5/27/2019 at 4:17 PM, Six-cylinder said: Mrs6C is trying to put the boat trailer tyres up to 60 psi and all 5 gauges we have read different. She is going to take the wheels as they are off the trailer to Tesco and use their machine. Mrs6C did indeed take all five tyres up to Tesco and set them all up for 60psi. The Tesco air machine said they were all at 57 after the air hose at home said 60 for each, so only 5% over-reading for the latter. They are now all at 60, with four replaced on their hubs and the fifth to travel in the car... CGSB 1 Link to comment Share on other sites More sharing options...
Eddie Honda Posted May 29, 2019 Share Posted May 29, 2019 4 hours ago, Mrs6C said: Mrs6C did indeed take all five tyres up to Tesco and set them all up for 60psi. The Tesco air machine said they were all at 57 after the air hose at home said 60 for each, so only 5% over-reading for the latter. They are now all at 60, with four replaced on their hubs and the fifth to travel in the car... You're placing a massive amount of faith in the forecourt pump. They must be the most abused and inaccurate machines know to man or beast! Link to comment Share on other sites More sharing options...
Six-cylinder Posted May 29, 2019 Author Share Posted May 29, 2019 2 hours ago, Eddie Honda said: You're placing a massive amount of faith in the forecourt pump. They must be the most abused and inaccurate machines know to man or beast! Because it is a paid for service the machines should be serviced and re-calibrated regularly. Link to comment Share on other sites More sharing options...
Mally Posted May 29, 2019 Share Posted May 29, 2019 You have too many pressure gauges. You need to distribute them among us, then no one will know that theirs is incorrect. Mrs6C, Tadhg Tiogar, Bucketeer and 2 others 3 2 Link to comment Share on other sites More sharing options...
Eddie Honda Posted May 29, 2019 Share Posted May 29, 2019 12 hours ago, Six-cylinder said: Because it is a paid for service the machines should be serviced and re-calibrated regularly. Do you really think they do? Are the well staffed* and funded* local Trading Standards team checking up on them to see if they comply? 'should' is a world apart from reality. Especially given all those careful* and considerate* users that use the paid-for machine correctly. Link to comment Share on other sites More sharing options...
Bfg Posted May 29, 2019 Share Posted May 29, 2019 ^ given that someone would inevitably suit the arse off Tesco ("other brands are available") if an accident were attributed to over or under inflated tyres, then I would think it more likely that they would have their gauges checked ..more frequently than independent filling stations. After all the cost of having their garage equipment checked is just passed onto the customer anyway. Link to comment Share on other sites More sharing options...
beko1987 Posted May 29, 2019 Share Posted May 29, 2019 Plus all the measuring equipment is in the box box, the air hose and valve bit are just dumb arent they? Granted I've done my fair share of just dropping it on the floor and watching it reel itself in before... Link to comment Share on other sites More sharing options...
.thumb.JPG.c423b11d285a842ce16ccde3f52edfdd.JPG)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now