Jump to content

19 Years of Tin Snail - Back to normality


Recommended Posts

Posted

I think I'll leave well alone. Compression is up to about 150psi each side, which is what it should be. There is still some leakage - I can actually hear it with the manifolds off - but it isn't dropping anywhere near as quickly. Will hope Italian tune ups can sort it out.

Posted

So much for leaving well alone. We got the heads off to change the seals both sides, and found water damage in the bores. So, we pulled the 652 barrels and pistons from the broken engine and swapped the lot, including cylinder heads, onto the new crankcase. The crankshaft in the newer motor feels much better - lots of jiggly conrod action on the old one. All back together, test drives concluded. A touch of pinking, so I need to reset the ignition timing then, hopefully, I'm done. Had helpful assistance today!

D-je49NXYAAOp2w.jpg

Tomorrow, the journey begins, with a 200-mile drive to Cambridgeshire to break up the drive to Harwich. Ferry departs 11pm Friday.

Posted

Top work! at least at the end of this whole escapade you get to keep your 652cc Power :) 

did you remember to stick the bigger jets back in the carb? I feel like that could be something that could be overlooked especially given the urgency of everything!

  • Like 2
Posted

Yes, bigger jets went in. Good thing about having some help is that we could do two jobs at once!

 

Timing sorted, even replaced a couple of dodgy bolts holding the fan shroud on. Calling her good to go! 200 miles tomorrow, handily in the direction of a 2CV Specialist! Haven't done any packing, so I'll be hurling stuff into bags and wondering what I've forgotten. As long as my passport is there, not sure I care about much else!

Posted

What an amazing turnaround. I doubt I would have persevered with the looming departure date, but you did it. Fantastic work!

  • Like 2
Posted

Thanks. A friend is building a BMW-powered 2CV for the trip. He hasn't driven it yet, but it is running! He once ended up fitting an engine on the night before the ferry, so I think it must just be a 2CV thing.

I will try to update this thread while I go, but I'm not sure how much time I'll have for internetting. Maybe I'll go all traditional with a post-event report like the olden days.

  • Like 4
Posted

Do you mind if 'we' (probably me and a few others) share any social meedia stuff on the trip here? Conscious that not all shiters dig the medium of Twitter and Facebook etc. Worked quite well last year when you and Rich were going through the Balkans...

Of course that would rather de-value the post event write-up!

Posted

No, that's fine. Like you say, I think it worked well. I can then 'fill in the dots' when I'm back. Cheers.

Posted

Bon chance, courage!

what could go wrong? 

 

 

 

No, don’t answer that,

Posted

My friends Jerry and Gita are going in his Burton kit car. Red, British reg. say hello if you bump into them.

 

2BF7CF5E-00C0-4DE0-B66E-9B7153B9CD93.jpeg

Posted

what is your route and timing thereof if any shitters or hubnutters want to wave/gesticulate at you to speed you along?

Posted

We'll be travelling back from Brittany via channel tunnel on Saturday so if any 2CV'ers see a Brit C4GP waving at you that will be us, have a great trip all!

Sent from my Moto G (5) using Tapatalk

Posted
13 hours ago, Noel Tidybeard said:

what is your route and timing thereof if any shitters or hubnutters want to wave/gesticulate at you to speed you along?

Mostly entirely unknown. I don't even know what time I'm leaving the house today yet...

Posted
1 hour ago, dollywobbler said:

Mostly entirely unknown. I don't even know what time I'm leaving the house today yet...

spoken like a true idiot shitter :common007:

Posted

Balls of steel Wobbler. I don't think I would.

Rainham to Thurrock is quite enough, takes about 10 - 15 minutes.

Posted

First 200 miles could have gone better. Fan fell off after 198 miles and broke itself. At least I was close to my destination...

Spare fan now fitted.

IMG_20190704_180755_382.jpg

  • Like 2
  • Sad 1
Posted

Are those made out of Bakelite? The brownish colour reminds me of Bakelite switches.

 

 

Great repair series by the way. I know I couldn't have done that in the same space of time!

  • Like 1
Posted

A sheared pulley, or just lost the bolt? 

Posted

Came loose. Bolt still there. My idiocy continues. If that has failed on the motorway, that would have been the end of another motor...

Posted
29 minutes ago, dollywobbler said:

Came loose. Bolt still there. My idiocy continues. If that has failed on the motorway, that would have been the end of another motor...

I sheared a fan casting in Dover once. Didn’t realise- it was quiet. Only when I got home again to Hillingdon at the time, did the oil pressure light come on. Mind you it was -3 in December. This time of year, maybe not so lucky.

Posted

going anywhere off this island - rule is if you make it to the ferry without issue

no problem

(unless for you fishguard :D )

Posted

last night in Blighty for a bit then? We'll keep the Hob-Nobs in the fridge while you're away.

31 degrees in Zagreb tomorrow. 

Mind out for sunburn 'over there'

Posted

Good luck. What a palaver. Looking forward to YouTube updates. 

Posted
2 hours ago, richardmorris said:

I sheared a fan casting in Dover once. Didn’t realise- it was quiet. Only when I got home again to Hillingdon at the time, did the oil pressure light come on. Mind you it was -3 in December. This time of year, maybe not so lucky.

Do these 2cv engines rapidly overheat when there is no cooling fan? I'd thought on the motorway there would have been plenty of airflow to keep things ok. 

Posted

They get pretty hot, pretty quickly. Cylinder heads especially. Especially as the stuck fan tends to then block airflow. Without cowlings, as on many kit cars, they're ok. I was pretty lucky.

Posted

Tinkering went well today. Fresh oil, valve clearances checked, new tyres, tracking adjusted and picked up a few more spares. 

IMG_20190705_114705.thumb.jpg.9838ba39a5b465b0aa73ff92b329045a.jpg

Yes, checking the tracking with wood!

Now approaching Harwich.

IMG_20190705_181844_462.thumb.jpg.ce1fb16cafe77348f9370466f1611dfb.jpg

Posted

happy to see things are going well :) especially after a very hectic start! (and thats putting it mildly!)

 

Posted

Elly's wings have been on and off this week more times than [insert saucy metaphor] 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...