Jump to content

gm's unhealthy obsession with mx5s - squeezing in a few last drives before Exo goes into hibernation


gm

Recommended Posts

On 7/21/2020 at 6:32 PM, gm said:

 a decent motorbike helmet will do the job, the only problem is finding one that fits - I went to a bike shop and tried loads on to find the right one.

This. Took ages to find a helmet that fitted me well. Apparently I have more of an arai head. Definitely try before buying.

  • Like 2
Link to comment
Share on other sites

45 minutes ago, loserone said:

What do you have against being comfortable, @gm ?

I can't be getting too used to comfort - look what I'm fitting in the exo  :) 

IMG_2045.thumb.JPG.a737aa8723e354cc24c0bde88cb00eda.JPG

Link to comment
Share on other sites

The seat in AVO had already had the foam removed when I got it and it was VERY comfortable.

I also didn't move when cornering.

Well worth doing.

  • Like 3
Link to comment
Share on other sites

Right then, time for a lunch break and an update

i got up early and had a walk down to the depot to collect my parcel from Lush cosmetics pollybushesRus 

IMG_2044.thumb.JPG.e1c9e69827076218d58bae55f3957d8a.JPG

Fast Road spec - whatever that means :) silly expensive for what they are but still cheaper than buying genuine mazda.

but before cracking on and fitting them, I had a bit of woodworking to do

an old pallet was found* at work and chopped into 200mm lengths

IMG_2046.thumb.JPG.d3addf838d960c8eb0ff51766513fb60.JPG

which I then wrapped in insulating tape

IMG_2047.thumb.JPG.009ae0d649edc11028bd24685aff1169.JPG

wtf ? I'm not building a Morgan - more will be revealed in a bit

  • Like 2
Link to comment
Share on other sites

job one : mx5 evicted into the pissing rain to make a bit of space - it might have to get used to being out there from now on.

 

front subframe lifted down from the workbench and positioned atop a spare steelie

IMG_2049.thumb.JPG.ed400c149bf2f9262f5bda5ac85a4b48.JPG

wheels fitted, removed again, brake discs fitted then wheels refitted as studs were too long for wheelnuts

IMG_2050.thumb.JPG.63d092fa31556c0f95382d81325d9f5e.JPG

I'm not sure this will be much of a problem just yet !

IMG_2051.thumb.JPG.f1e837a51c77ef0ff55d846187813e92.JPG

engine swingy time (thanks again to @garbaldy for the loan of his engine crane)

IMG_2052.thumb.JPG.d75e2cb84a3a299281970acd3297a27c.JPG

the engine mounts sit in little protective boxes which need held in place whilst fitting

IMG_2053.thumb.JPG.8c97ac5a595f5e6cbfaf8c757d1cca66.JPG

target acquired

IMG_2054.thumb.JPG.2c702ceea4e79dcb7f854f81f4ddf33e.JPG

incoming

IMG_2055.thumb.JPG.40bff0ea9dbb75e32bbb3852ef796ed6.JPG

 

 

Link to comment
Share on other sites

wheels off again so I can raise the subframe another wheel height (too heavy to lift)

and quite a bit of pushing and shoving and we have consummation 

IMG_2056.thumb.JPG.872b0ff13cce2edcc639eb12f4e3b3c5.JPG

Wheels back on and we have a problem - with no shocks fitted, the wishbones just flex upwards and the subframe hits the deck :( 

IMG_2057.thumb.JPG.30a84faa9a930dab1e56f7b4d6bffcd4.JPG

but remember these ?

IMG_2047.thumb.JPG.009ae0d649edc11028bd24685aff1169.JPG

boom ! I am a problem solving god ! (or have at least read the build guide)

IMG_2058.thumb.JPG.9095b3742e77a840fa80b39fcdc9eee6.JPG

IMG_2059.thumb.JPG.a745d7087ae26d297bd117b7d021cf0d.JPG

why are they covered in tape ? Just so they don't look shit :) 

IMG_2060.thumb.JPG.601b5332cd51cd2263ccda28e64a0b6e.JPG

so we have an engine / subframe assembly that (in theory) is capable of standing on its own two wheels and being rolled around the garage 

IMG_2061.thumb.JPG.ef92ae195942462d9cb75902d2f46556.JPG

and it's only taken three months to get here !

IMG_2062.thumb.JPG.6c0aad7ef01e8253e281f8f26827f324.JPG

Link to comment
Share on other sites

3 hours ago, gm said:

A man of your car buying abilities should be easily able to find a solution over the weekend :) 

Currently a diesel Octavia, a 1.0 Yaris or an xc70. 
 

I could take the I3 mind would be interesting until it ran out of charge about 3 laps in.

Link to comment
Share on other sites

a bit more 'woodworking'

IMG_2063.thumb.JPG.95ea63417ddce47aa9fa66c40abb59d5.JPG

IMG_2064.thumb.JPG.afd1d34e341694f529156b3e7f833811.JPG

@loserone 's bed slats coming in handy again

IMG_2065.thumb.JPG.c726648f0012e261cc111dd9fae34e1f.JPG

IMG_2066.thumb.JPG.24634f69e9a0d6e3730be3ba72e25ce0.JPG

and it's mobile ( I wonder how hilariously bad it would handle running on a full set of spacesavers ? might have to find out - I only need one more :) )

IMG_2067.thumb.JPG.3f948e013544df5ff2d8e5932cf9c0ae.JPG

a quick tidy up and the mazda can come back inside tonight

IMG_2068.thumb.JPG.eb5598ebc437546a06ebf3b43a35ef57.JPG

Link to comment
Share on other sites

More elegant* problem solving this evening

When I removed the roll bar, I hadn't considered where to mount the GoPro to record Mondays track nonsense

IMG_9116.thumb.JPG.9f6d7ede3f7cbce993183d2a7d4daf7e.JPG

so a solution was engineered

IMG_9421.thumb.JPG.4b07c5ee377ce08ca50ab44dcac58ee4.JPG

an old wardrobe rail and a couple of brackets and we're all set

IMG_9422.thumb.JPG.357ea71456b17374f8cd3f1726e12a9f.JPG

a quick coat of Lidl valu paint and call it a proper job :) 

IMG_9423.thumb.JPG.0962df849ff4a547e077ca5bca6ff009.JPG

IMG_9424.thumb.JPG.d77f9d4ba99a1369e843ba7e17359fe1.JPG

 

  • Like 3
Link to comment
Share on other sites

That front wing that lost a debate with the garage door frame has needed a bit of attention for about two years now 

IMG_9157.thumb.JPG.839c04391520e7e89e7591ec96075859.JPGIMG_9158.thumb.JPG.4ffb85d2d75cf503b7b8ce63354fe1ab.JPG

a wee rub over with some ancient G3 and we're good as new*

IMG_9425.thumb.JPG.909b4f6ffa6625999bf21460941549bd.JPG

well, it's a bit better, anyway

  • Like 2
Link to comment
Share on other sites

8 hours ago, gm said:

and it's mobile ( I wonder how hilariously bad it would handle running on a full set of spacesavers ? might have to find out - I only need one more :) )

thats something I have "always" wanted to see someone try with a Citroen Xantia activa LOL

A: to see how the fancy suspension setup would react to them and how the car handles or if it would all just implode

and

B: see if a world record for quickest time set for wearing down a set of tyres can be set LOL (but like not by doing burn outs or something such just by being ragged round a track or such)

 

 

Awesome work on the MX5 stuff BTW happy to see its coming together :) 

  • Like 2
Link to comment
Share on other sites

 

 

@paulplom having a couple of laps in my car, I'm in his car behind but the fun is cut short when I smell coolant and have to head for the pit lane quick style. thankfully just a burst blanking nipple and no permanent damage done. 

  • Like 6
Link to comment
Share on other sites

Annoyingly both me and Paul ended up with empty passenger seats so you could have come along and joined in. I’ll check when the next one is and book the day off work, I’m so glad I didn’t sell the mazda :) 

Link to comment
Share on other sites

Last time I was there I went round in the karts.  When I got out I was so used to the direct steering and left foot braking, I overshot a junction in my MX5 on the way home, taking out a traffic island.

  • Like 1
  • Haha 2
Link to comment
Share on other sites

I've been doing trackdays for many years and have never felt the need to complain to the marshals about another persons driving but I had to tonight, there was a lad in a bmw 140i that really didn't 'get it' - bombing it along the straights so no one could get past but taking the corners with awful lines at a snails pace - he was flagged in and spoken to several times but still didn't take any notice. everyone deserves to be given a fair chance, everyone needs to learn, but this guy was close to causing an accident on several occasions that I witnessed. 

this is towards the end of a three hour session, he still won't move over :(  

I really should have had a telling off for that move (passing should only be on the straights and by consent) 

 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...