chodweaver Posted July 14, 2019 Posted July 14, 2019 I can't overstate the respect here for your work on this car. I'm sure it's going to pay you back in your skill and speed on a Triumph project you really want to take on...Sent from my BV6000 using Tapatalk LightBulbFun 1
scdan4 Posted July 15, 2019 Posted July 15, 2019 You bought it to learn to weld. you can now weld. Your time is now better spent elsewhere. Good work, well done. LightBulbFun 1
purplebargeken Posted July 15, 2019 Posted July 15, 2019 Your time is better Sprint elsewhere. LightBulbFun, scdan4, tooSavvy and 1 other 1 3
sharley17194 Posted July 16, 2019 Posted July 16, 2019 Sad sad day, but we understand your reasons. its on to the next chapter.
vulgalour Posted July 16, 2019 Posted July 16, 2019 Good luck! Hopefully all the work done and the extensive history will encourage the new owner it's worth sorting and you can move on to other projects. LightBulbFun 1
SiC Posted July 16, 2019 Author Posted July 16, 2019 I need to update this thread as I've got the final bits done ready for the next owner and transport. Just feel really bad that it is one of the last posts in my hands and that I haven't finished it myself. However the new owner has not only the skills to finish it, but also a large parts stash that can get it back on the road with. scdan4, LightBulbFun, RayMK and 10 others 13
SiC Posted July 22, 2019 Author Posted July 22, 2019 Bye bye little 1100 You've left a 1100 shaped rusty mark in my heart/drive Big thanks to worldofceri for the delivery service. I still need to do a full write up on the final bits that I did, which I'll do some point soon. It's now off to its new owner who will finish off the remaining bits and get her back on the road! Dick Cheeseburger, richardthestag, egg and 6 others 9
richardthestag Posted July 22, 2019 Posted July 22, 2019 well done SIC, been a fun thread to follow, agree with you on the reasons it needs to move on. Now where is that MGB LightBulbFun and purplebargeken 2
SiC Posted July 22, 2019 Author Posted July 22, 2019 well done SIC, been a fun thread to follow, agree with you on the reasons it needs to move on. Now where is that MGBAt the in-laws still! It had a good run up to the FoTU this weekend just gone. Still nomming the oil at quite a rate. I've put the old oil cap on but with a new o-ring. I'm hoping that it will make a better seal and thus on acceleration/deacceleration, it will create a restriction and less likely to blow oil through the pistons. Not sure if it is out the tailpipe but PBK was following me at the weekend and remarked he was choking on grey smoke it was chucking out. I've also agreed to buy another 70s money pit... Collection on Wednesday! LightBulbFun, adw1977, richardthestag and 4 others 7
JeeExEll Posted July 22, 2019 Posted July 22, 2019 53 minutes ago, SiC said: I've also agreed to buy another 70s money pit... Collection on Wednesday! You can't just leave it at that!! Is it a Rolls Royce Silver Shadow?
SiC Posted July 22, 2019 Author Posted July 22, 2019 You can't just leave it at that!! Is it a Rolls Royce Silver Shadow?Those who went to FoTU/FoD at the weekend have had a sneaky advanced notice! Well ... actually PBK accidentally told everyone and let the secret out... BorniteIdentity 1
LightBulbFun Posted July 22, 2019 Posted July 22, 2019 1 minute ago, SiC said: Those who went to FoTU/FoD at the weekend have had a sneaky advanced notice! Well ... actually PBK accidentally told everyone and let the secret out... I must of missed him doing so because I just cheekily asked you what it was
worldofceri Posted July 23, 2019 Posted July 23, 2019 And so, part V begins... The 1100 in it’s new (old) home: Scruffy Bodger, danthecapriman, sharley17194 and 10 others 13
purplebargeken Posted July 23, 2019 Posted July 23, 2019 Ummm, yeah, soz abut that, genuine mistake in blurting. Still, we all love an Allegro don't we. LightBulbFun, richardthestag, busmansholiday and 2 others 1 4
sharley17194 Posted July 23, 2019 Posted July 23, 2019 New old temporary home! I'd best get on and start part v! LightBulbFun, JeeExEll, Dick Cheeseburger and 3 others 6
SiC Posted June 25, 2020 Author Posted June 25, 2020 Holy thread resurrection! Noticed @sharley17194 did a video of this today: Apologies for not finishing that rear part of the sill off! Also have a replacement mount I need to give to you for that nearside rear subframe. Coprolalia, mk2_craig and purplebargeken 3
sharley17194 Posted June 26, 2020 Posted June 26, 2020 Don't worry about the sill i have a new rear arch and sill end to go on which will tidy it up no end, Its nice the holes are all square and not just a rusty mess.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now