Jump to content
dozeydustman

Saab 93 WBOD - £250 or roffle £4.50/£8 for 2

Recommended Posts

I believe either have failed. You really need to get a fault code scanner on it that is capable of reading ABS codes on the 9-3. An OP-COM should be able to do it.

Share this post


Link to post
Share on other sites

I'll have a poke around with the multimeter at the weekend. I'm not busy and the mrs is out helping her friend choose a rescue cat. As long as she doesn't come home with one as well I'll be happy.

I bought a code reader from eBay but it arrived DoA and won't charge up, so looking to get a refund there.

Share this post


Link to post
Share on other sites

I'm tempted by this. Anything I should look for if I go and take a look? Half the mileage of mine. Ideally I'd want to see it running in the car just to make sure no blue smoke or OMGHGF etc.

 

https://www.ebay.co.uk/itm/SAAB-93-9-3-VECTOR-1-9-TID-2006-ENGINE/273361267586?hash=item3fa599eb82%3Ag%3A8a8AAOSw4GFbTiL-&_sacat=0&_nkw=saab+diesel+engine&_from=R40&rt=nc&_trksid=p2380057.m570.l1313.TR2.TRC0.A0.H0.Xsaab+diesel+engine.TRS0

Share this post


Link to post
Share on other sites

I'll have a poke around with the multimeter at the weekend. I'm not busy and the mrs is out helping her friend choose a rescue cat. As long as she doesn't come home with one as well I'll be happy.

 

I bought a code reader from eBay but it arrived DoA and won't charge up, so looking to get a refund there.

The cheap code readers are unlikely to be able to read the ABS codes.

Share this post


Link to post
Share on other sites

The cheap code readers are unlikely to be able to take a charge and actually work

 

 

FTFY

 

I've had 2 turn up that have crapped out on me. Hopefully Stanky is still coming to the mini meet on 25th with his magic box.

 

Got a few small jobs I can be getting on with tomorrow on this car, might just unplug the wheel sensors on both sides and follow your guide SiC - I've had naff all car tinkering time the last couple weeks due to weather, work and some issues with stepdaughter that have taken priority over everything else. Still not found the swirl flap actuating rod, hopefully I can either bodge the loose one back in or remove it completely with everything in situ as I have some quite long long nosed pliers.

 

Regarding that engine on the fleabay, had some more in depth looks at it and it looks like it's a dog. Didn't notice the smashed up timing cover, but there are other things like a bent dipstick tube and things that look a bit broken which to me would say it's been taken out of something that's had a front end smash or a bit of rough handling being extracted from the car. Another will turn up that isn't a stupid price, especially if I search for Vauxhall ones not Saab.

 

Would an XUD fit?

Share this post


Link to post
Share on other sites

As noted on the Grumpy thread Saab died on way home from work. Nursed it home with no power steering and unable to open windows to give a hand signal.

 

Something is eating all the electricity coming from the alternator. Spent a good hour since I got home checking connections within easy reach and earthing points, all are good.

 

14v direct from alternator, only 12.1 at the battery so charge light comes up. Done the usual switching things on and off to see if there is a difference in voltage. Nada.

 

Come to the conclusion that either the main ECU is up the shitter, or there is a short or broken wire in the loom somewhere. It has got to the point that I got to do some serious number crunching and see whether it's replace or repair time. I think this may be the cause of the EML coming on and off at random, and the ABS/ESP/TC randomly not working.

 

Good points:

Economical, comfy, goes like shit off a shovel

 

Bad points:

Mysterious electric gremlin, needs swirl flaps doing, tapping noise (intermittent) from top end.

 

not sure where the main ECU is; don't really want to spend too much as this might not be the problem.

Share this post


Link to post
Share on other sites

14v direct from alternator, only 12.1 at the battery

Unless electrickery on cars has changed massively in the couple of years between the newest car I've worked on and yours, there should be just a fat cable going between the B+ terminal on the alternator and the +ve post of the battery (although it may go via other places on the way), so to drop two whole volts between the Alt and Battery means there is something very wrong with that cable, or your battery has internally shorted and is dragging current like a bastard.

 

I've no idea of the layout in your car, but can you trace that cable, and where it goes and what it connects to on the way? I syspect you'll find something chafed almost completely through, or very badly corroded. Quite what, I'm not sure, but there's something quite wrong there, and it's fairly basic.

Share this post


Link to post
Share on other sites

I am going to whip the battery out, give it a charge, then get it tested. It's only a few months old and has guarantee, I'm really hoping it's not that, but in a way I also am hoping as it's an easy fix.

 

The big wire from the alternator goes via the starter according to the "typical wiring diagram" the HBOL has. If I can find a decent diagram instead of Haynes' old tripe then it gives me a better chance of finding a bad connector or fault. Could be the starter motor or solenoid if this diagram is correct.

 

The main part of this sub-loom appears to go round the back of the engine, then under it, then back across it, then over it, then disappears somewhere else before it gets to the battery.

 

Could just run a feed directly from the alternator to the battery.....

Share this post


Link to post
Share on other sites

Right, battery is on charge, though it's either i) not totally flat as the charge rate is extremely low or ii) knackered as the "charged" indicator on the (borrowed) charger has been flashing on and off after 10 minutes of being on. Must get it tested tomorrow just to rule this out.

 

Been probing with my ancient multimeter set to continuity. Trying to trace the wire from the alternator to see where it ends up before going to battery. I may have a short somewhere. Component, frayed wire - not sure yet as I need to poke around a bit more. One probe fixed into the +ve battery lead and poking around seems to reveal that anywhere EARTHED makes continuity. Jiggled some parts of the loom but made no difference. B+ terminal of alternator direct to battery +ve clamp shows NO continuity.

 

Think I'm going to need to spend a couple more hours looking for this one - I'm used to proper cars with mechanical engines and only 5 wires! A decent wiring diagram would help instead of the crap in the Haynes' manual with its 'typical' layouts.

Share this post


Link to post
Share on other sites

 

 

And I've replied :D

 

The weird thing is the 2 volts dropped on route to the battery, which would suggest a part is draining somewhere, the battery is kaput, or there is a short. I'm thinking the last of those three as there shouldn't really be any connection to an earth from the battery positive!

Share this post


Link to post
Share on other sites

Get similar things happen when I test components on my old consoles and build electronic things. I'll report back with the battery diagnosis tomorrow afternoon. Starting to have brainfarts now which means I should go to bed.

 

But I'll still be commenting on here at half 10 no doubt.

Share this post


Link to post
Share on other sites

Battery tested, it's still good, so that rules one item out.

 

Reconnected it to the car via an ammeter. 250mA initially when connected, soon dropped to below 50mA when electricity had weedled its way through the car (about 3 seconds).

 

Reconnected car properly, cranked over, initially again only 12.1v at the terminals, but after putting a good load on - full beam, heater, radio, anything else I know takes a lot of power, voltage shot up to 13.4v.

 

Turned all this off and then voltage stayed steady at 12.9v. Went for a 5 mile drive, got back, measured voltage at battery with engine running, still at 12.9v, going up to 13.1v after a minute or so.

 

I'm wondering if there's a bad or iffy connection somewhere that needs a bit of extra power to make it good, so this week is going to be spent looking (again) at all the earthing points around the car, possibly add a couple of earthing straps between engine and body if needed.

 

Had a theory though. A few months back all of a sudden the passenger side mirror just folded itself in on its own, and the button to fold/unfold no longer works. The driver's side mirror that hadn't adjusted or folded electrically also started working. Just wondering if this has something to do with it. There's no sound of an electric motor trying to move anything at any time.

Share this post


Link to post
Share on other sites

How easily can they be disabled? Since its the sort of thing that you set right once then leave forever is it worth just disconnecting the electrics to them both once set to the right position? Even just for good measure?

 

EDIT - if this gets bridged, can I put in a speculative request for the swan-neck bit of the washer bottle if its not totally broken like mine is? Sorry if its a bit too soon, but you know sometimes threats help with these sort of issues. go and mutter to it that it had better buck its ideas up because the vultures are already circling sort of thing...

Share this post


Link to post
Share on other sites

How easily can they be disabled? Since its the sort of thing that you set right once then leave forever is it worth just disconnecting the electrics to them both once set to the right position? Even just for good measure?

 

EDIT - if this gets bridged, can I put in a speculative request for the swan-neck bit of the washer bottle if its not totally broken like mine is? Sorry if its a bit too soon, but you know sometimes threats help with these sort of issues. go and mutter to it that it had better buck its ideas up because the vultures are already circling sort of thing...

 

 

I think it's just a case of pulling the fuse but I'll check later when I've had supper. Could always just pull the connections out the doors behind the trim.

 

Bridge is my last resort. Ideally I want to use the car until the MoT runs out in April then offer as spears and reapers it to another shiter for similar money than weigh it in. WBAC offered me £15 including the private plate (valued at £500), so they can FRO. If I can sort this issue out for pence then I'll spend a few quid sorting the emissions and EML fault(s)

Share this post


Link to post
Share on other sites

Are you certain the alternator is putting out 14v at the terminals? As it's pretty much a direct feed, it should be going through. Double check that the cable from the alternator to starter is clean and fixed properly. Maybe even run a feed directly from the alternator to the battery terminal too.

Share this post


Link to post
Share on other sites

Are you certain the alternator is putting out 14v at the terminals? 

 

 

13.9 on my digital, 14 on my swing-needle meter.

 

 

Double check that the cable from the alternator to starter is clean and fixed properly. Maybe even run a feed directly from the alternator to the battery terminal too.

 

 

First thing I checked earlier - everything appears to be nice and secure. Latter is an idea I've been mulling through my head. The waggling of the negative lead tends to make the meters fluctuate as opposed to the positive, which is why I'm going to give the earthing points a going over. Again. And add extra earth straps if needed. Still not ruling out a failing component taking a higher than normal load.

Share this post


Link to post
Share on other sites

Tried putting a jumper cable between the engine block and battery negative terminal? Makes a nice chunky ground path.

 

If the alternator terminal is putting out 14v, the battery should be at that level too! The alternator to battery link should be so low impedance that for something to be dragging it down that low, it'd be getting incredibly hot.

 

My suspicion is highly on the positive link from the alternator to starter to battery. Or a bad earth from alternator to battery.

Share this post


Link to post
Share on other sites
Guest Hooli

I don't know if I said it earlier but check the alternator is earthing to the engine correctly too. I had that once years ago & took me ages to find.

Share this post


Link to post
Share on other sites

I have never had an alternator fail in 44 years (obviously I am a lucky sod) BUT I did once buy a car that wouldn't charge: 14volts at the alternator gave 12volts at the battery. This was because the alternator was mounted via rubber bushes and the earth strap between alternator and engine was U/S.

Share this post


Link to post
Share on other sites
Guest Hooli

I have never had an alternator fail in 44 years (obviously I am a lucky sod) BUT I did once buy a car that wouldn't charge: 14volts at the alternator gave 12volts at the battery. This was because the alternator was mounted via rubber bushes and the earth strap between alternator and engine was U/S.

 

That was the issue I had on a Manta.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By ruffgeezer
      Didn't really want to be selling this without seeing it through fully, but as I've now 3 cars on my own fleet out of 4 needing attention, I feel I must make room and time to get on with those.
      Bought originally as a non-runner, I had it towed home, pulled the wiring apart and buzzed the loom, and taped it back up. I have been using it without fault for around 200 miles, save for some water getting in the abs unit plug. (I have treated it with elec. Cleaner and Wd40, it occasionally misbehaves in wet weather still)
      It now has a comprehensive service history, it has had a refurbished rear axle, alternator and a new clutch within the last few years, and the cambelt done in 2014 at 73k. 
      Currently the mileage is 114k and the mot is due June 2020, in my opinion the sills may require attention as they are a bit tatty, for the time being I have flatted them back and covered them in stone chip paint. The body is generally good, save for giffer touch ups all over in the wrong shade of green.
      It has remote central locking, both keys and does generally drive really well, HOWEVER, the EGR valve seems to be stuck as when vacuum tested, it holds but does not sound to be moving. This manifests itself as a slight hunting between 1800-2000rpm.
      EDIT- EGR NOW REPLACED, NOT MADE ANY DIFFERENCE.
      I will give it a minor service before collection, but the price is a firm £650, which reflects the work it has had in the past, but also the fact it needs a little more fettlement.
       












    • By DaveDorson
      I really need to unload some of the cars.
       
      Doesn't matter how much I try and justify it to myself, I've just got way too many at the moment.
       
      This is a large problem that became very apparent when I started looking at moving workshop to somewhere larger to consolidate where I keep my stuff and hopefully make some headroom.  The realisation struck me that I've got enough work to keep me going until retirement, and it's simply not worth it.  I need to cut some stuff out and make a clean break I think.
       
      Current list.
       
      1972 Beetle 1200 restoration (keeping and finishing, it's Sarah's car so probably doesn't count, to be fair I've done a fair bit on this)
       
      2000 beetle 2.0 (Sarah's car, needs a battery and some welding doing, but given she's not driving it's fine, and it can be quickly made into a car again.  I really need to keep this one too.
       
      1984 Caravelle restoration (keeping and finishing, had this forever and can't part with it.)
       
      1974 Subaru Beetle (can't really sell this one, made a promise on it and need to see it through)
       
      2006 Mondeo ST 2.2 Diesel (I'm keeping this, as it's my daily driver)
       
      So that brings us to the stuff I really need to get rid of.
       
      2002 Mondeo ST220 in Infra Red (I bought this because nothing appreciates like a fast ford, it's a project but an easy one, and I've not touched it for three years now.  It's in a dry garage, this can be for sale.  I keep missing the guy with the garage access to get the pictures done
       
      Here's one from just before it went into storage.  I can't imagine being that it's sat in a dry garage it looks a lot worse.  Battery will be shot, needs a window reg, they're about £20, I might have one.  It had a bit of a sump weep and needed discs and pads, and probably tyres too.  I don't remember seeing any rot in there, but it may have started to go a bit by the front wings.
       
      FB_IMG_1548892719181 by davedorson, on Flickr
       
      it's infra red, I've got some good part worn tyres I can sell with it for the right money, needs re-commissioning.  Plate is N99 JLM,
       
       
       
       
      1999 Golf S 1.9 TD estate.  That's the one that was meant to go last week.  All working now, just needs me to put some coolant in it and get a battery, the chap was meant to bring one, then let me down, MOT'd till March 29th.  Might just get this re-MOT'd and park it down the unit as a spare "pool" car.  NOW SOLD
       
      IMG_20181215_100535522 by davedorson, on Flickr
       
      W124 300E (m103 3.0), ex David Bailey car apparently.  Lost all the paperwork, probably worthless, refuses to run right, I suspect the K-Jet is shagged.  I just can't find the motivation to do this.  It's fairly solid, I've got new discs and pads in the boot for it.  Really should just get rid of this one.  if anyone wants this please get in touch, and I'll do some photos for you. 
       
      2018-08-09_09-18-46 by davedorson, on Flickr
       
      It won't come on the 17's, as they're valuable on their own, I've got some original wheels, but I need to sort them out with tyres, I'll try and do that and get some updated ones.  NOW SOLD
       
      S124 200TE, rusty.  Currently at a friends in Corby who's been apparently doing the welding on it for me.  I'm yet to see evidence of this.  I've basically written it off as a bad experience.  If anyone wants this please get in touch.  It does drive, but it's rough as arseholes due to degraded ignition bits and very rusty, although it might be less rusty now.  I dunno, I'll arrange some photos if I can.  Reg is G878ERP if you're curious, as you can see, off the road for ages!  NOT MOVED SINCE I STARTED THIS THREAD, ANYONE FEELING BRAVE?  MESSAGE ME!
    • By TheDoctor
      Important numbers.
      £250 straight sale. 
      £4.25 per ticket. 5 for 20 quid. 
      11 months MOT. 
      Located at @loserone's gaff, so North East. 
       
      Buyer who was going to have it can't insure it on current policy. 
       
      More pics / info to follow, but get your names down! 

       
       
    • By loserone
      1.  @Mr_Bo11ox paid
      2.  @yes oui si PAID
      3.  @jmsguzzi paid
      4. @robthedonkey PAID
      5.  @Floatylight paid
      6.  @Tickman paid
      7.  @paulplom paid
      8. @jmsguzzi paid
      9.  @Aston Martin paid
      10. @Tickman paid
      11.  @2MB paid
      12.  @Jim Bell PAID
      13.  @flat4alfa
      14.  @paulplom paid
      15.  @Matts_Rusty_Bus paid
      16. @Ohdearme
      17.  @Eddie Honda paid
      18.  @blakey79 paid
      19.  @yes oui si PAID
      20.  @Braddon81 paid
      21.  @flat4alfa
      22.  @Matts_Rusty_Bus paid
      23. PICNIC PAID
      24.  @Timewaster paid
      25.  @Jazoli paid
      26.  @sims00 ticket exchange
      27. @Matts_Rusty_Bus paid
      28.  @Eddie Honda paid
      29. @alcyonecorporation paid
      30.  @gm paid
      31.  @robthedonkey PAID
      32. @sims00 ticket exchange
      33. @prepace paid
      34.  @jmsguzzi paid
      35.  @paulplom paid
      36.  Mother @gm paid
      37.  @Mally paid
      38.  @Tickman paid
      39. @davehedgehog31 freebie because he's such a winner
      40.  @sims00 ticket exchange
      41.  @Aston Martin paid
      42. @paulplom paid
      43.  @eddyramrod paid
      44. @Matts_Rusty_Bus paid
      45.  @Jim Bell PAID
      46. @Eddie Honda paid
      47.  @Tickman paid
      48. @robthedonkey PAID
      49. @Aston Martin paid
      50.  @eddyramrod paid
      51.  @TheDoctor paid
      52.  @eddyramrod paid
      53.  @Disco Fever paid
      54. @davehedgehog31 ticket exchange
      55. @Jim Bell PAID
      56.  @Eddie Honda paid
      57.  @Disco Fever paid
      58.  @Lacquer Peel paid
      59.  @robthedonkey PAID


       
      Don't think I need any more than those smiles to sell it.
    • By cms206
      Hallo chaps. Too much tat lying and I have a funeral to pay for...
      Mk2 Mondeo 2.0i Zetec, 44k miles, on ST170 alloys plus comes with a set of original spec 5-spoke alloys on duff tyres. MOT til 27/5/2020, some history and a recent battery.
      There are a few marks (pictured), the rear arches aren't too far gone and it has had welding done on the sills.
      The front windows open fine but need a little help closing, they come out the runners on the way up. C/L and heated screen work fine, as does the electric drivers seat adjustment. The clutch bites cleanly and the car pulls well through all the gears.
      It has been sitting a month or so due to the diesel Proton's arrival and I could really do with the cash (unless someone has a carb-fed Proton saloon kicking about in which case I'll sell my arse instead).
      Advertised elsewhere for £525, £400 on here with shiters discocunt applied.
      Car is in Paisley, Scotland, four minutes walk from Paisley Canal station.






×
×
  • Create New...