Jump to content

Mostly FREE, ultimate shiter clearance, mostly parts, some full cars!!!


Recommended Posts

Posted

It might well be kicking around somewhere :)

 

it is in a kit car, long gone apparently, so the volvo has only got a gearbox,  - there are a couple of engines to be purchased for smoll donations :)

 

Also the alloys and roof rack are staying as he runs a 240 as a daily - sorry to muck folk around, he's obviously struggling with this to a degree, as I'm sure we 'shiter's can appreciate ;)

Posted

The Tercel Estate 4x4... does he have any glass from it perchance?

 

We have an identical one, (blue on blue too!) but vandals smashed a rear side window :(

 

there may be some in there, but Chris (sheffield cortina centre) has a mate who is taking the lot, best to message him to see if he'll have a look and part with it :)

Posted

.... sorry to muck folk around, he's obviously struggling with this to a degree :shock:

 

Sounds like there's a lot of mind-changing going on  :shock:  - he might decide to retain the lot!

Posted

Sounds like there's a lot of mind-changing going on  :shock:  - he might decide to retain the lot!

 

I may have made it sound worse than it is! there is a mountain of stuff still for free, and there definitely isn't room for it at his new unit, it's possible a third of the size of the current one, if not less!

 

We do have new owners for the Tercel, Prairie, Aggro VDP for freebies so far, and I'm confident that the nearer moving day we get, the more focussed on rehoming we will be naturally :)

 

I'm off up there soon to take more pictures and get more details and check off the wanted list I've made from everyone on the thread so far - also there is a Pug 205, with a spare engine that has become available for smoll cash money a buyer has pulled out of - and I don't want to be too previous about this, but a running Metro has a provisional buyer only, which could be available :)

 

I'll be back as a famous fella once said :)

  • Like 1
Posted

Austin 1100 clutch hose would be handy, I'm not sure if they're the same as on the Mini, but Max probably knows.  Anything Princess (wedge type) could also be of interest to me.  In fact, anything 1100 (ADO16) or Princess is going to be of interest to me.

Posted

Is this the red one he used to run about in?

 

no, amazingly he sold it to a lady who has been up and down the country in it, and presumably has massive forearms now :)

 

it's blue but more or less the same he says, pics to follow :)

  • Like 1
Posted

Here's some pics of the old unit to give an idea of what Max needs to shift, and the loveliness of his chod :)

 

post-20048-0-52846400-1515515844_thumb.jpg

 

the front - check out the qwalitee motaz

 

post-20048-0-17290700-1515515900_thumb.jpg

 

The back - most of it anyhow :)

 

post-20048-0-02236000-1515515956_thumb.jpg

 

post-20048-0-72305400-1515515997_thumb.jpg

 

Some cars available, some not so much, but all bobby dazzlers :)

 

post-20048-0-19669200-1515516083_thumb.jpgpost-20048-0-19669200-1515516083_thumb.jpgpost-20048-0-19669200-1515516083_thumb.jpgpost-20048-0-93874100-1515516140_thumb.jpg

 

post-20048-0-46979000-1515516188_thumb.jpg

 

post-20048-0-44746900-1515516220_thumb.jpg

 

post-20048-0-05952600-1515516248_thumb.jpgpost-20048-0-50933500-1515516276_thumb.jpg

 

That will do for now I guess, more posts to follow in a few minutes!

Posted

Need a Blacktop zetec 2.0 petrol engine from Mondeo / Fiesta.

Have many pound notes.

 

There is this fine steed, a Mondeo 2 litre petrol manual, I assume this is the engine you require? It's one of the club member's grandfather's old motor, who passed away, left on his driveway for a while, and is apparently a sweet runner, only 30k on the clock! Needs both sills welding, one already half done, will come with new ones required, anyone any idea on a fair price?? Sorry forgot to mention, he thinks it's far too good to break for parts, but money generally talks ;)

 

post-20048-0-00334300-1515516655_thumb.jpg

 

post-20048-0-78499000-1515516680_thumb.jpg

 

post-20048-0-11327100-1515516734_thumb.jpg

 

And finally, quick pop quiz, what is this thing skulking in the background? Apparently he has forgotten about it, hasn't mentioned whether its for grabs or not, it was destined to lose it's engine to a mini project :)

Posted

....

 

attachicon.gifIMG_20180108_135523.jpg

 

And finally, quick pop quiz, what is this thing skulking in the background? Apparently he has forgotten about it, hasn't mentioned whether its for grabs or not, it was destined to lose it's engine to a mini project :)

 

Looks like a Daihastu Charade. Can't tell whether it's the GTti variant.

 

*squints*....then again, it could be a Honda Civic.

Posted

As promised here are some answers to many queries :)

 

Mk2 Craig - not got any pics yet of the XR2 engine but he wants around £100 - open to cheeky offers of course :)

 

Alabama Shrimp - wanted fiesta bits, not really, there are some going in the Tercel, spoken for now unless a deal with Sheff cortina centre can be struck after he's picked it up.

 

Ghosty - 240 glovebox lock - possibly, but if he has to go looking, remove etc then that impacts on his business time, so would want smoll cash monies - that really applies to all minor bits that aren't really helping clear bulk of stuff, merely distracting from the major work of disposal ;)

 

DJoptix - renner 30 rear discs - sorry none

 

Tommotech - shelving and benches - maybe at the end of the move process. Also if warning light can't take the volvo estate then by all means step up,( I'm assuming it's too involved for Eddy ramrod at this time) - as it stands Max wants the alloys (will come with steelies), wants the back axle as it's LSD on the 265 (will come with a 240 axle, but could he please have the axle back when it's convenient, will come to you to pick up), and wants to keep the roofrack - there will be a load of other spares you can have mind you.

Also pretty sure there is Metro internal trim in grey, can you be more specific with pics, or just come on down and have a look!

Let me know how this sounds by pm, ta.

post-20048-0-19983300-1515517899_thumb.jpg

 

Elfion - wanted a 205 roofliner - sorry not got one.

 

Stanky - girling master cylinder for ford - sorry none.

 

Wuvvum functioning PAS rack for 205 - sorry none.

 

cpjitservices - head for escort - sorry none.

 

Have a picture of a camper van as a treat :)

 

post-20048-0-13141500-1515518222_thumb.jpg

Posted

....

 

Looks like a Daihastu Charade. Can't tell whether it's the GTti variant.

 

*squints*....then again, it could be a Honda Civic.

 

close, here's another pic -

 

post-20048-0-30939300-1515518344_thumb.jpg

Posted

^ Civic I reckon.

 

Edit: didn't see that back end picture previously. Civic shuttle?

 

As an aside, what's happening with the mini van?

Posted

My Disco is well out of action at the mo and likely will be for the next couple of weekends due to work, so I'm going to have to back out from the Volvo - hopefully someone can take it on!

Posted

^ Civic I reckon.

 

Edit: didn't see that back end picture previously. Civic shuttle?

 

As an aside, what's happening with the mini van?

 

Close but no biscuit,  - edit - you do get a big chocolate biscuit sir, i was being a bit cheeky hanging on for the Shuttle part :) sorry the minivan is Max's baby, needs another resto job, but is mostly legal and a good runner - I'm told it's worth big money, even more than my Pug 205 estate which seems all rong :)

 

Anyone know what this is, and any takers?

 

post-20048-0-30565800-1515519270_thumb.jpg

 

I mean the thing behind the other thing that lives on a car normally ;)

Posted

Good to hear he's keeping the mini van and hopefilly doing something with it.

Yup, crazy money.

Posted

How fooked is that CF?? I'm guessing the answer is 'very'...

 

Yes indeed, you can collect your free biscuit on Friday :)

 

It was a nice thing apparently when the young couple brought it in many moons ago to "restore" it - it has had the sills and floor done apparently, but as you can tell there is plenty more to do yet, and they have ripped the interior out and shagged it - amazingly one of the club members has agreed to take it on - but buggered off travelling for a year, so I'm not sure that's going to work either ;)

  • Like 1
Posted

Sod the Volvo, I want the CF!!!!!!!  But you were correct, Jim, the Volvo is indeed too involved for me to take on.  Thank you though!

Posted

^ Civic I reckon.

 

Edit: didn't see that back end picture previously. Civic shuttle?...

It is indeed a Civic Shuttle. Google Images confirms it. 16v but may not be VTEC

  • Like 2
Posted

^ VTEC yo hadn't been invented in 1985.

Posted

There is this fine steed, a Mondeo 2 litre petrol manual, I assume this is the engine you require? It's one of the club member's grandfather's old motor, who passed away, left on his driveway for a while, and is apparently a sweet runner, only 30k on the clock! Needs both sills welding, one already half done, will come with new ones required, anyone any idea on a fair price?? Sorry forgot to mention, he thinks it's far too good to break for parts, but money generally talks ;)

 

 

Really only want the 2.0 bare engine, no box. Will pay £150 if its out ready for me to collect, pm me if anything can be done.

Won't help him with the clearance just making more work I suppose.

Probably as much as the cars worth though and he can still weigh it in.

Posted

^ VTEC yo hadn't been invented in 1985.

I think that's a 1989 G-plate, rather than a 1985 "C".

Posted

XR2 engine - I'm out but there are various Fiesta groups out there where the word could be spread, if your man wants?

Posted

Really only want the 2.0 bare engine, no box. Will pay £150 if its out ready for me to collect, pm me if anything can be done.

Won't help him with the clearance just making more work I suppose.

Probably as much as the cars worth though and he can still weigh it in.

 

No worries mate, probably best he tests it keeping it whole, too good to break :)

Posted

XR2 engine - I'm out but there are various Fiesta groups out there where the word could be spread, if your man wants?

 

That would be great, his core business is Mini's so this could well go, offers invited, nice and cheap :)

Posted

Got any info on the Pug 205 Diesel  reg  F705EEG  ?

 

It's basically a decent shell, decent diesel non turbo 160k 1769cc engine, in the normal world a spares car, in Max's world salvageable - he was going to put  a 406 diesel turbo intercooler engine in which he has, but didn't, obviously(says he thinks it's the same cc).

Asking £100 for the car, £100 for the engine, buy both and get a massive discount! (as far as I can see in the next couple of weeks make a daft offer you'll probably get them for peanuts ;)

Posted

CF  low digit plate   :-D

 

Have some bonus rear end action :)

 

post-20048-0-24486500-1515533808_thumb.jpg

 

post-20048-0-37605300-1515533851_thumb.jpg

 

That's all I've got of that beauty :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...