Six-cylinder Posted September 2, 2022 Author Posted September 2, 2022 Tomorrow Saturday 3rd Sep, 2pm I will be at the FoD with Slowsilver working on the Saab 95, join us if you like.
Floatylight Posted September 3, 2022 Posted September 3, 2022 Anyone coming to the FOD this weekend or next who could pick something up from @castros_bronear Guidford for me?
chaseracer Posted September 3, 2022 Posted September 3, 2022 13 hours ago, Six-cylinder said: Good of the AA to turn out on spec, just in case... 😁
Six-cylinder Posted September 3, 2022 Author Posted September 3, 2022 8 minutes ago, chaseracer said: Good of the AA to turn out on spec, just in case... 😁 That was my first thought, but I could not remember ever seeing that model in AA branding. I went in for a closer look because I am sad like that, I was in luck evidence of its former life was there in the form of the shadow from signwriting. It was a plumbers van for Sun Realm Heating Ltd.
Six-cylinder Posted September 3, 2022 Author Posted September 3, 2022 Work has began on the Saab! Vantman, Floatylight, richardmorris and 1 other 4
chaseracer Posted September 3, 2022 Posted September 3, 2022 Anyone there tomorrow, Chris? beko1987 1
richardmorris Posted September 3, 2022 Posted September 3, 2022 3 hours ago, Six-cylinder said: Work has began on the Saab! Faithful old retainer appears to have collapsed. You could at least provide a soft mat to lie on. Mrs6C 1
hairnet Posted September 3, 2022 Posted September 3, 2022 1 hour ago, richardmorris said: Faithful old retainer appears to have collapsed. You could at least provide a soft mat to lie on. so excited he fell asleep
Six-cylinder Posted September 3, 2022 Author Posted September 3, 2022 1 hour ago, richardmorris said: Faithful old retainer appears to have collapsed. You could at least provide a soft mat to lie on. He had a mat that was the problem that temped him to lay down!
Six-cylinder Posted September 3, 2022 Author Posted September 3, 2022 3 hours ago, chaseracer said: Anyone there tomorrow, Chris? I don't think I have any volunteers for tomorrow. Take the exhaust off, drain oil, undo starter motor and undo bellhousing bolts. Then position boards for engine crane to run on are the temping jobs on offer! LightBulbFun 1
Mrs6C Posted September 3, 2022 Posted September 3, 2022 3 hours ago, Six-cylinder said: I don't think I have any volunteers for tomorrow. Talbot and I will be there of course, though we'll be working on the barn roof. @chaseracer, you are welcome to pop in for a cup of tea and a piece of cake, if you're passing.
richardmorris Posted September 4, 2022 Posted September 4, 2022 22 hours ago, Mrs6C said: Talbot and I will be there of course, though we'll be working on the barn roof. @chaseracer, you are welcome to pop in for a cup of tea and a piece of cake, if you're passing. I was thinking of visiting, but have not felt well this weekend, no idea why, just listless with no energy. Good that some progress is happening with SAAB.
richardmorris Posted September 4, 2022 Posted September 4, 2022 On 9/3/2022 at 7:56 PM, Six-cylinder said: He had a mat that was the problem that temped him to lay down! A Matt? Luxury! You’ll be making him tea next.
Mrs6C Posted September 4, 2022 Posted September 4, 2022 2 minutes ago, richardmorris said: have not felt well this weekend, Sorry to hear that. Hope you are and feel much better, very soon. There was good progress made at the FoD, on both the Saab and the barn roof. Also, much tea and many biscuits were consumed. All in all, it was a very nice weekend. Hope you will be able to join us for another one in due course. Six-cylinder 1
Fumbler Posted September 4, 2022 Posted September 4, 2022 I might try and shove the 850 up to help partake in spannering... and get more willow cuttings. They mysteriously disappeared while I was on holiday Six-cylinder and Mrs6C 2
Six-cylinder Posted September 5, 2022 Author Posted September 5, 2022 17/18 September FoD The main aim is to take the engine out of the Saab 95 and diagnose what is wrong with it. In addition other games to play: Make the ramps from the CF fit our small car trailer Check Anti-freeze in any car you can find Refit driver’s window regulator to Citroen ZX Unwrap Toledo 2 door for some Photos to get it sold Motor bike trailer – fit the new wheel bearings Make a couple of the mopeds run. Start Carlton 1.8 GLi. Work on/clean your own car/stuff Prepare wood for enclosed fire pit if anybody is staying for the evening Drink tea and chat. LightBulbFun 1
Six-cylinder Posted September 5, 2022 Author Posted September 5, 2022 A home for you unwanted odd bits of timber at least 875mm long! I had a shock at how expensive timber sheets are for shelving our new steel shelving racks. I decided that the cost was prohibitive and thought I would just gather some free unwanted pallets and break them up to form slats, but it turns out to be very hard work to dismantle pallets and the cost of getting the free pallets in petrol is high. The shelves are 875 deep and 1500mm wide and there are 18 of them. I still need shelves and over time will gather free slats and do it that way. If you have any real timber 875mm long 10mm to 40mm thick we can provide a home for it. The width is not important as many will be laid side my side to fill the width of the shelve frame. Clear you garage out.
3VOM Posted September 5, 2022 Posted September 5, 2022 Just had a thought - do you have any large kitchen retailers/wholesalers near you? I used to be able to pick up 1200 x 800 x 15-18mm chipboard sheets as they are on the bottom of every kitchen pallet to prevent damage to the cabinets themselves. They use to give them away as it was cheaper than having to pay someone to dispose of them. Mrs6C 1
Six-cylinder Posted September 6, 2022 Author Posted September 6, 2022 When I post events I have been to sometime people say to me "if I had know I would have like to have gone". This coming weekend is my favourite Citroen Rally of the year and I plan to be there with 9/10 of our Citroens. All classic cars welcome and non Citroen moderns can be parked in the main car park to view the magnificent selections of Citroens. LightBulbFun, chaseracer and Rust Collector 3
Six-cylinder Posted September 6, 2022 Author Posted September 6, 2022 Thank you @Slowsilverfor your help today getting Mrs6C's Ferrari to Service. We woke it up last week and all seemed well. This afternoon we collected it and gave it a wash. Then for some genuine 4* petrol and safely delivered it for a cambelt service later this week. How much a litre do you think leaded 4* costs? RayMK, Coprolalia, catsinthewelder and 10 others 13
Six-cylinder Posted September 6, 2022 Author Posted September 6, 2022 Just when @Slowsilverthought he had earned a sit down and a cup of tea back at my house, I opened the post and found the new petrol pump for the Trevi had arrived and he was back to work. I lost the petrol pipes and of coarse it turns out I had left them on the old pump as it is easier to remove them with the pump. We could not line up the bolts that attached the pump after going though the dipstick bracket, fuel pump, gasket and spacer block, many bad words were considered. In the end Slowsilver had to go home for his tea or it would have ended up in the cat. I took it off again and even then could not get the bolts to start so I took off the oil pressure sender. Still no go so I run a tap though the fixing holes and that did the trick. The Trevi fills its fuel filter, starts and runs. I did not take it out as it was getting dark and I was tired, the thought of petering to a halt on the road side was very unappealing. Rust Collector, LightBulbFun, RayMK and 8 others 11
Crackers Posted September 6, 2022 Posted September 6, 2022 27 minutes ago, Six-cylinder said: Oh now that is delicious. wuvvum and LightBulbFun 2
MondeoBlues Posted September 7, 2022 Posted September 7, 2022 Didn't even know you could still get 4*
hairnet Posted September 7, 2022 Posted September 7, 2022 So I got email just now from this lot They changed my time from after noon to lunchtime Guess where I was gonna be going In a shit 12 hours that's cheered me right up Six-cylinder 1
Six-cylinder Posted September 7, 2022 Author Posted September 7, 2022 We went to the FoD today and the wind had blown the bonnet off the Saab. The rear wheels were in their guides, but the front was undone and the wind just pushed the bonnet forward. Now held with bailer twine. bobdisk and richardmorris 2
richardmorris Posted September 7, 2022 Posted September 7, 2022 On 9/4/2022 at 9:57 PM, Mrs6C said: Sorry to hear that. Hope you are and feel much better, very soon. There was good progress made at the FoD, on both the Saab and the barn roof. Also, much tea and many biscuits were consumed. All in all, it was a very nice weekend. Hope you will be able to join us for another one in due course. Thanks. Still not right, but don’t know why really - upset stomach it may be, but seems a long time. Hope to come up. Mrs6C 1
richardmorris Posted September 7, 2022 Posted September 7, 2022 12 hours ago, MondeoBlues said: Didn't even know you could still get 4* It was £1.50 a litre back in 2006. My x1/9 was only run on it. By now I expect it’s £3 a litre?
richardmorris Posted September 7, 2022 Posted September 7, 2022 23 hours ago, Six-cylinder said: Thank you @Slowsilverfor your help today getting Mrs6C's Ferrari to Service. We woke it up last week and all seemed well. This afternoon we collected it and gave it a wash. Then for some genuine 4* petrol and safely delivered it for a cambelt service later this week. How much a litre do you think leaded 4* costs? I see the faithful old retainer has a little man from the garage to fill up for him. Looking like the lord of the manor there @Slowsilver! wuvvum and Mrs6C 2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now