Jump to content

Tickman's stuff. Tidy* up time.


Recommended Posts

Posted

Can I have a go at knockhill mister?

Cheeky git! You've already got his old MX-5 to keep you entertained!

Posted

No need to spend that money on a mig if your just fannying around with cars. There’s loads of really good migs for 300 quid. If I had that money for a welder I’d be getting a tig.

Yeah I believe it does MIG, MMA (ARC) and TIG. All the tools and attachments I believe come with it. Bloody expect so though. What draws me to it though is making very good welds without much skill or practice. Rather than having to learn the skill of setting up the machine and settings, you become just a torch guider.

Posted

Need to make sure it gets there first!

Just push that rusting pile of Neil's junk out the way and get on with it :-)
Posted

Just push that rusting pile of Neil's junk out the way and get on with it :-)

I don't own the Clio anymore;)

Posted

Time to get Ben out today.

 

post-17457-0-98850500-1518101513_thumb.jpg

 

It is a bit narrow.

 

post-17457-0-12273100-1518101306_thumb.jpg

 

Getting there.

 

post-17457-0-04296900-1518101316_thumb.jpg

 

It has been several tears since this was empty.

 

post-17457-0-12551700-1518101327_thumb.jpg

 

First trip out may as well get the shopping I need.

 

post-17457-0-87801900-1518101335_thumb.jpg

 

Still haven't managed to get a battery clamp for it.

 

post-17457-0-13591000-1518101351_thumb.jpg

 

Next stop Forfar. I can confirm that he will happily sit at 65 going up the A90.

 

post-17457-0-51349000-1518101358_thumb.jpg

 

Time to check the tracking on the Clio after the gearbox was changed.

Just a little out.

 

post-17457-0-60171000-1518101374_thumb.jpg

 

Here too.

 

post-17457-0-03600900-1518101379_thumb.jpg

 

Up in the air to adjust, one side is free but the lock nut on the passenger side doesn't want to move on the shaft, it is free from the trackrod so penetrating oil has been applied.

 

post-17457-0-38825000-1518101394_thumb.jpg

 

Ben wanted to go for a quick drive so KFC was visited and he was then reversed in so he could be put away for the day.

 

post-17457-0-41911100-1518101408_thumb.jpg

 

Here is the chock full workshop at close of day (as much as I was doing today)

 

post-17457-0-88979200-1518101413_thumb.jpg

 

 

Not too bad a run for him as he has been off the road for about 20 years and after 10 minutes round the local area I get straight on the A90 and he does me proud.

Posted

Great stuff!   Looking forward to giving mine a battering next week - brakes nearly done (but not by me).  Really missed it these past few weeks.

Posted

Time to get Ben out today

 

 

Not too bad a run for him as he has been off the road for about 20 years and after 10 minutes round the local area I get straight on the A90 and he does me proud.

 

You need to have a word with SiC.

Posted

Great stuff!   Looking forward to giving mine a battering next week - brakes nearly done (but not by me).  Really missed it these past few weeks.

 

I was nice to be back in a Minor and everything worked when I left... 

 

Edit, still haven't seen much of your fleet which is a shame.

Posted

You need to have a word with SiC.

 

Only a speedometer present and that was making a horrible clicking noise as the cable was not quite in the back of it so that got disconnected in one of the parking laybys of the A90 on the way to Forfar. I already had the phone app running for the speed so I could actually see how fast he was going.

Posted

Just had a quick check back and the last tax expired at the end of July 1981, it has been a while then.

  • Like 1
Posted

Just had a quick check back and the last tax expired at the end of July 1981, it has been a while then.

I was 4 months old..

Posted

 

Edit, still haven't seen much of your fleet which is a shame.

 

It is a bit shameful, TBH.... 

 

I will do a proper update with Mrs R's non-steam camera very soon!

  • Like 2
Posted

You have the tools to do tracking... hmm?

 

The BMW I picked up from that very place a couple of weeks back feels like it needs the tracking done. That bridge can be crossed post-MOT though.

Posted

You have the tools to do tracking... hmm?

 

The BMW I picked up from that very place a couple of weeks back feels like it needs the tracking done. That bridge can be crossed post-MOT though.

 

When I'm there a tool is certainly present!

Posted

Before the Clio, who has been named Sid, goes to Knockhill a few jobs were needing done.

 

Firstly I ordered the Auxiliary belt kit and it arrived.

 

post-17457-0-55251200-1518444900_thumb.jpg

 

I got an excellent diagram off the internet.

 

post-17457-0-00224700-1518444912_thumb.jpg

 

I took the front off the car.

 

post-17457-0-95776500-1518444916_thumb.jpg

 

I messed around for ages and got to this point with the tensioner changed, and the pulley underneath also changed but the belt not on.

 

post-17457-0-84635100-1518444920_thumb.jpg

 

I butchered an extension bar and stuck it to a flat bit of metal I had from an old railing.

 

post-17457-0-60947400-1518444924_thumb.jpg

 

I put a bit of a bend in it.

 

post-17457-0-86226600-1518444934_thumb.jpg

 

I adjusted the bend a little more.

 

post-17457-0-45145800-1518444939_thumb.jpg

 

Finally.

 

post-17457-0-06201700-1518444930_thumb.jpg

 

Back together and had enough for the day.

 

post-17457-0-10606200-1518444943_thumb.jpg

 

 

Next time tracking needs re looking at.

Posted

Look at all that space - ideal turbo room!

 

s-l300.jpg

Posted

Good work! I put a jubilee clip round the tensioner to compress it, took a few jubilee clips as it's a fecking powerful spring!

 

Welcome to the world of working on these things!!

Posted

Good work! I put a jubilee clip round the tensioner to compress it, took a few jubilee clips as it's a fecking powerful spring!

 

Welcome to the world of working on these things!!

 

I tried the jubilee thing but the cheap ones I had said no!

  • 2 weeks later...
Posted

When I got the green Clio for Chuck (her money, not mine) the hazard lights only worked on one side, it is due an MOT in a few weeks so time to get sorting things.

 

Initial discussions with our tame Clio collector said TADTS but try cleaning the switch, several months later I had a look at the switch and it wouldn't latch at all so I went on ebay...

 

Old one out

 

post-17457-0-71320300-1519576951_thumb.jpg

 

New one tested and working

 

post-17457-0-22517300-1519576959_thumb.jpg

 

Job done :)

  • Like 3
Posted

Was expecting asbestos brake linings or similar from the title!

Posted

Was expecting asbestos brake linings or similar from the title!

 

Sorry for the false advertising, I shall try and do something dangerous as penance.

  • Like 2
Posted

Attempting to fix Renault electrics is pretty dangerous. You're fine.

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...