Jump to content

03 focus tdci 3 door £175


Recommended Posts

Posted

My sisters 03 plate focus tdci. 116k on the clock. MOT until mid Jan 2017. Timing belt done at 93 k. Four recent yokohama tyres and front struts fitted. Good bodywork save for a dent on drivers front wing - vandalism.Bonnet lock is knackered but can be opened with a screwdriver.Standard radio needs refitting to car.

 

Why so cheap? Car cuts out intermittently - has faulty instrument panel, this could be the cause or it could be unrelated. Would suit somebody with access to a spares car.Apart from cutting out it drives nicely and engine is quiet. It is the 100 PS model.

 

post-4771-0-99073900-1481982316_thumb.jpg

post-4771-0-08125100-1481982336_thumb.jpg

 

post-4771-0-14302700-1481982363_thumb.jpg

 

post-4771-0-15345900-1481982386_thumb.jpg

 

post-4771-0-53260400-1481982411_thumb.jpg

 

Far too good to scrap. £175 takes it away. Car is in Widnes.

  • Like 3
Posted

The two are linked. There are companies out there that will sort it with a replacement instrument panel for a couple of hundred quid.

Posted

Does anyone know if a panel from a 1999 1.8 petrol is the same? Got one in the yard that's going on a one way journey in the next few days and the instruments are probably the best thing on it....

Posted

I think Bren is in Warrington.

Posted

Could be wrong but it's more serious than the fault with the speedo. Have you checked the pump?

 

I'd be inclined to take the turbo, EGR, pump etc out then bale it, worth more as parts

Posted

That looks too clean and rust free for a Focus to be scrapped surely, even the dent on the wing looks like the majority could be pushed out by hand, so new bonnet lock, instrument panel and hopefully that sorts out the cutting out, bargain!!

Posted

I have been asked to put this on ebay today as my parents want their drive back. Bodily car is very good - I dont think it has been welded.

Posted

Got to be worth a punt. That looks so clean and tidy!

Posted

Odds are just resoldering the connector and cleaning the pcb with alcohol and a fine scotchbrite would sort out the clocks and cutting out, I've done about half a dozen of them.

Posted

If you eBay it stick a link up, please. Is it worth a raffle on here, or too much faffing about?

Posted

How does the clocks not working cut the engine? I can't understand how Ford can design a ECU that requires comms with the clocks to continue to run.

Posted
  On 18/12/2016 at 12:40, SiC said:

How does the clocks not working cut the engine? I can't understand how Ford can design a ECU that requires comms with the clocks to continue to run.

Afaik some Vag products have the clocks tied into the ecu,certainly the Leon Cupra I had was afflicted with this when I investigated transplanting the engine

Not something I'm aware of with Ford tho.....

Posted
  On 18/12/2016 at 18:37, andy18s said:

Afaik some Vag products have the clocks tied into the ecu,certainly the Leon Cupra I had was afflicted with this when I investigated transplanting the engine

Not something I'm aware of with Ford tho.....

Yeah most modern VAG have the clocks as part of the immo system. However once the car has started, they don't need comms still to stay running.

Posted

Hi Bren. I am in Widnes too, I had one a few years ago that would cut out and sometimes not start. Twas cam sensor on top of Cambox. Came up on scanner too. I am in Widnes, and if you want,I will scan it foc for you

Posted

Thanks for the offer but the car is now on ebay with one bidder. My parents just want it off the drive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...