Jump to content

Moogs Motahs - Puggled


Recommended Posts

Didn't bother to do a collection thread as was a 30min drive so fairly boring.

 

Yesterday I won this

 

post-3994-145665964666_thumb.jpg

 

Which is effectively going to replace the civic and the xantia.

 

post-3994-145665967088_thumb.jpg

 

Picked car from a bodywork guy in foreign lands (Yorkshire).

 

First thoughts are that I think it has been sitting for a while but started straight up. Apart from service bits and potentially a cambelt everything seems to be good with it. Comes pre dented.

 

Current is differently abled tax so that will need to be changed.

 

Windscreen has small crack in passenger side.

 

Runs really cold, this is after 30 miles of motorway

post-3994-145665995207_thumb.jpg

 

Mind you it honks. Properly honks. Not as much as the focus I got from Shadow but not far off.

 

post-3994-145665997385_thumb.jpgpost-3994-145665998011_thumb.jpgpost-3994-145665998578_thumb.jpgpost-3994-145665999095_thumb.jpgpost-3994-145666000023_thumb.jpgpost-3994-145666000846_thumb.jpgpost-3994-145666002084_thumb.jpgpost-3994-145666002787_thumb.jpgpost-3994-145666003553_thumb.jpg

 

List of jobs

 

Oil change

Spark plugs

Air filter

Thermostat

Rear boot struts

Front discs and pads

Cam belt plus bits

Ball joints

Drop links

Rear anti roll bar bushes

Stereo code

Windscreen crack

Swimming pool emptied from boot wheel well

Seal rear light clusters

 

And a big does of cleaning

Link to post
Share on other sites

I think I might have a few bits for S40/V40 squirreled away in the garage behind my old S40 (just about) pictured below. Nothing major, a few trim bits and other useful-ish little things. I'll find out and can bring them in the summer, if you still have this one by then. BIG IF.

 

IMG_4575_zpstczbijck.jpg

 

If you're replacing the Civic and Xantia with this, does that mean you're gonna use the Harlot as a daily (as I presume the auto Volvo is primarily for the fairer side of the household) or does it mean what I hope/think it does, that you're planning something else for yourself?

There must still a bit of room in front of the house.

Link to post
Share on other sites

No mobile phone... Although something has been screwed to the passenger dash

 

Volvo is for missus Moog. Which in theory means I can have whatever I want. I think in short term I will run the starlet as it is just a brilliant car.

 

Apparently 4 cars are too many :-)

Link to post
Share on other sites

Took advantage of the sun and got stuck in.

 

Came with free onboard swimming pool

 

post-3994-145667673981_thumb.jpgpost-3994-145667674554_thumb.jpg

 

Set to work with the Titan and emptied it all out

post-3994-145667676763_thumb.jpg

 

Stripped out the back seats

post-3994-145667678599_thumb.jpgpost-3994-145667679812_thumb.jpg

 

Dried out nicely

post-3994-145667682006_thumb.jpg

 

Let missus Moog go for a run around the block. This time she didn't scratch it, instead she broke the gearlever.

 

Two problems in this photo.

 

post-3994-14566768646_thumb.jpg

 

Someone has disabled the internal sensors

post-3994-145667691315_thumb.jpgpost-3994-145667691875_thumb.jpg

 

Overall not a bad looking car for 200k

post-3994-145667693453_thumb.jpgpost-3994-145667693977_thumb.jpg

Link to post
Share on other sites

They are jointly developed with Mitsubishi so v40 is carisma based.

 

Going to be missus moogs car so all little niggles need to be fixed. So fair apart from gearknob everything is just service bits.

 

If we can get a year out of if for £350 then it is job done :-)

Link to post
Share on other sites

Leak I think is boot seal or rear light clusters or both.

 

Boot seal was moist when I pulled it up. Also when I lifted the boot water ran out of the light clusters. I think judicious use of sealant will be way forward.

 

Carpets have been sprinkled with neutrodal tonight to help with smell.

 

Bought all the bits needed for the car from eBay, coming in at a grand total of £150 which is £70 cheaper than eurocarparts.

 

Checked the handbooks and service history to 160k.

 

Anyone know how to get a radio code for the double din radio?_

Link to post
Share on other sites

My top tip for light sealage is Carafax non-setting bedding mastic.

 

Its about 5-6 quid for a large tube that will seal many lights. I got the tip from a Subaru forum and its worked well on my scoob.

 

Sikaflex etc sets solid where as this carafax stuff allows some flex and still seals like the oem stuff.

Link to post
Share on other sites

Decided to try a tip from on here before using sealant.

 

Popped to track and bought a cheap camping mat.

 

post-3994-145708771136_thumb.jpg

post-3994-145708771704_thumb.jpg

 

Test fit

post-3994-145708772629_thumb.jpg

post-3994-145708773734_thumb.jpg

 

Will see if that helps. If not I will get busy with sealant.

 

Had been hoping to do wishbones today but with snow it ain't happening. Instead fitted new boot struts which is one of those satisfying jobs.

 

 

EDIT- didn't work!

Link to post
Share on other sites

Today started bright and sunny so after lunch decided to crack on with Volvo.

 

Plan was lower wishbones, droplinks, discs and pads at the front. Then if I had time a service.

 

Got to play with my new tool - ryobi impact wrench. Also got a torque limiter for doing up wheel nuts.

 

c75966b23fe9c2d296ca715fd32cdc04.jpg

 

Up and off

post-3994-145720022069_thumb.jpg

 

Wishbone off. The ball joint nut was a proper fucker, ended up having to cut the nut off.

 

post-3994-145720024004_thumb.jpg

Tidy work area

post-3994-145720028485_thumb.jpg

 

Arm on although again ball joints again a pain. Quick YouTube and found if you apply pressure with a crow bar you can get the nut done up. One of those 15 hands needed jobs.

 

Changed discs and pads. Discs are warped and pretty knackered. Pads weren't too bad.

post-3994-145720037677_thumb.jpg

 

Droplink decided not to play ball and wouldn't come undone so left it for another day.

 

The heavens opened and it started to hail. The first time I stopped for a cup of tea, after that cracked straight on with other side. Ended up working through the next 3 hail showers!

 

post-3994-145720056372_thumb.jpg

 

Other side was a mirror image with drop link not playing ball and ball joint nut a pain to get on and off.

 

Going to palm off drop links to garage.

 

Also looks like it needs tre as loads of play on drivers side.

 

On plus side the pouring water into the boot has subsided to a trickle. I think the other tail lights are letting some in, so will seal them.

 

Ordered a new gearknob -£40 from a breaker.

 

So far it is

 

£130 purchase

£147 - service parts, wishbone etc

£40 - gear knob

£10- mastic for sealing lights

Link to post
Share on other sites
  • The Moog changed the title to Moogs Motahs - Puggled

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By vulgalour
      As tradition dictates, an thread.
       
      It all kicked off here: http://autoshite.com/topic/34152-citroen-bx-17rd-for-sale-sale-on-hold-as-its-done-a-citroen-the-little-bastard/
       
      Lorry is booked for collection tomorrow and a 340ish mile round trip awaits.  It will be a long, but rewarding, day.  No live collection updates because I live in the olden times and even if I didn't, I'm not sure I could be entirely arsed.
       

       
      I am looking forward to meeting Dean-numbers, his collection of wobbly French cars and, of course, Bleriot the BX.  It will probably be too dark to do anything when we get back on Friday so I suspect Saturday I'll be up bright and early to get stuck in and see just what I've let myself in for.
    • By L fallax
      I’ve been considering making a topic for progress with my Felicia for a little while, I want to reflect on what’s been done in a more organised fashion compared to flicking through photos on my phone. 
      I’ve had a keen interest on older generation Skoda for quite some time (100series-Facelift Felicia), I bought this 1999 T reg Skoda Felicia mid April. Would of loved to buy the pre-facelift model but sadly most seem to have been scrapped, however mine does come with the 1.3 OHV engine -the same used in Rapid 136’s, albeit slightly modernised and with Siemens multi point  fuel injection producing a whopping 68bhp.  
       

      First pic after a wash. Missing headlight trim, dinged rear OS door, NS fender is a bit bashed in as the original owner must of had a bit of a bash, the whole bumper sits a little lopsided. Hopefully can get the bodywork pulled at some point.

       
      This is my first car that I’ve bought with my own money, so naturally wanted to put in the effort to get her running smoothly with some maintenance: new oil & filter, air filter, coolant flush, wipers, bulbs, spark plugs, valve cover gasket etc.
        
      Engine bay needed multiple washes to clean up, looked a right bombsite when I bought it, some neglect was evident from past owner!
      Three and a half months later and my Felly is now road legal (due to issues with DVLA and V62), what a jolly little car to drive though! The exhaust blows like a wet fart when you press the accelerator but it’s very comical. (Obviously will fix this when I’ve the money, haha.) 

       Driving around aimlessly I’ve covered around 160 miles in a couple of days.  I decided to drain the gearbox and refreshed it with some 75W90 SS Gl4, after a few embarrasing car park CRUNCHES into reverse gear enough was enough, definitely was well overdue a change and now it’s silky smooth. 

      Blue Lagoon Metallic is the colour for anyone wondering.
      (Removed the faded Skoda badge and sprayed the 3D Favorit badge and grill black - perhaps not to everyone’s taste but it’s my car ?)
      Next to do is fit new brake discs & yellowstuff pads which have been sat in the boot for a couple months, need to file the edge of the pads down a tad and find a way to remove the locking pin screw from the disc- I can’t seem to get them to turn using an impact screwdriver but perhaps I just need to hit harder!
      The goal is to fit a few unnecessary modifications,  just some stiffer lowering springs and alloy wheels with good tyres. Nothing too crazy. The ride is pretty good, very little body roll, the strut brace seems to work well. A very throwable and responsive supermini, town and rural road driving is an awful lot of fun. 
      If anyone has some Favorit "Skoda" mudflaps let me know as I really would like to replace the ones that are fitted!
      Updates to come.
      All welcome to share thoughts and stories alike ? 
       
    • By Peter C
      Woke up this morning, had a little time before I had to leave the house for work, had a quick look at what’s new for sale on Retro Rides and saw an ad for a W124 200E manual, located 15 miles from home. I had no intention of buying a car today but I had to have it! I called the seller and arranged a viewing.
       
      Faults:
       
      2 x rusty front wings (TADTS)
      1 x rusty rear arch
      Needs a polish
      Tracking is out because new track rod end was fitted for MoT
      Engine has oil leak/s
       
      Good points:
       
      It’s a W124 200E!
      5 speed manual transmission
      New clutch
      Brand new MoT
      Superb MoT history
      4 x as new Continental tyres
      Last owner for 15 years, her husband before that for 4 years
      Very tidy MB-Tex interior
      Drives well
      All electrics work
       
      The dealer kindly delivered the car to my house but I managed a pez station shot on route:
       

       
      Plans:
       
      Remove front wings, cut away rust and apply plenty of wob.
      In-situ similar repair for rear arch
      Clean and polish
      Service engine
      Adjust tracking
      Leave patina and enjoy the car as it is
       
      I will update this thread once progress is made.
       

       

       

       

       

       

       

       

       

       
      Hopefully these two will become good friends.
       

    • By PhilA
      Well, here we go again. I bit the bullet and bought me this.
       
       

       

       
       
      It's still up at the lot right now, there will be a miniature Collection Thread embedded in this thread when I go fetch it. Hopefully if the weather's good, that'll be this weekend.
       
      So, what is it?
       
      As the title suggests, it's a 1951 Pontiac Chieftain.
      It's got a flat-head straight eight hiding in the engine bay, 4.4 litres of it. It's bolted to a 4-speed Hydra-Matic Drive gearbox. No torque converter on this one, just a fluid coupling. 116 horses at a screaming 3700 RPM, 240lb/ft at 2000. It idles at 375 RPM. Redline just shy of 4k.
      Did I mention it's quite big? Sixteen foot eight from end to end and it seats six people in comfort. Every door has a quarter-light, too. Comfort is provided by properly sized tyres and (quite surprisingly for the age of it) double independent wishbone front suspension. Steering is via worm/wheel steering box so is moderately direct and the brakes are hydraulic drums all round. Modern and scientific!
       
      It's an honest example; looks to have had a "restoration" about 15-20 years back and the rust is coming through the seams and filler. The bottoms of the door skins have gone, the bottom of the A-pillars have gone (the front doors, on a single hinge a piece still open and close with one finger!) And it's got a couple holes and blebs in all the places you would expect.
      Not much electrical works. It needs to be completely rewired because someone has "converted" it to 12V. Thankfully it was originally negative ground so that's a good start. Gauges and such can be driven from a 6V bucking converter.
      Engine has had some work done on it- starts and runs nicely with very little greb coming out of the exhaust. It's got a few gaskets that need replacing and the tappets need some major adjustment, the gearbox engages gears correctly, the steering is okay but has a lot of slack in the center and the brakes work well, dont sink or feel spongy but need adjustment.
       
      More to come. I'll post up more pictures when I get it home.
       
       
      --Phil
    • By captain_70s
      Hullo,
       
      I'm a masochist from Leeds who is running two rusty, worn out Triumph Dolomites as my only transport in rural Aberdeenshire. You might recognise me from various other forums and Facebook groups. Realistically I need to buy a modern car of some sort, but instead I find myself looking at £300 Citroen BXs and Triumph Acclaims on Gumtree and thinking "yeah, that'd fit right in with the rest of the broken cars I can't afford".
       
      On to the cars, the main attraction being my 1976 1850HL "50 Shades of Yellow" that I bought for £850 and is currently my daily driver, here is a picture of it before I sanded off some surface rust and sprayed it badly in the wrong shade of yellow with rattle cans:
       

       
      Within a month of purchase I managed to plant it in to a steel fence backwards after a botched gear change on a wet roundabout and ruined the N/S rear wing, although judging by the other dent that's packed with filler it looks like somebody had already done the same. I also managed to destroy a halfshaft and one of my Sprint alloys (good for an extra 15hp) in the incident, so now it's sitting on it's original steelies but painted black (good for an extra 5hp).
       
      It's only broken down on me twice. once with some sort of fuel delivery related problem which may or may not have been an empty fuel tank and once when the thermostat jammed shut and it overheated and blew out some O-rings for the cooling system. It has recently developed a taste for coolant and oil which is rather annoying, although it's done 89,300 miles which is about 80,000 more miles than BL engineering is designed to last, I'm keeping my eye on eBay for replacement engines... 
      I tried to keep ahead of the rust a bit by rubbing down the arches and re-painting them, but apparently rattle can paint isn't great when you are spraying it at -5C, it also highlighted how although my car might have been Inca Yellow in 1976 it's now more of a "cat piss" sort of shade. So I ended up with the wrong shade of yellow which has rust coming back through after 5 weeks. Did I mention I'm incompetent?
       
      The other car is the first "classic" car I bought, so I can't bear to sell it. It's a '77 Dolomite 1300 and it cost £1400 (about £400 too much) and has been nothing but a pain in the arse:
       

       
      It looks much prettier (from 100 yards) but that's most due to the darker paintwork hiding the rust. It lives a mollycoddled life in my garage, where it somehow still manages to rust, and is utterly rubbish. 0-60 is measured on a calendar, top speed is 80ish but at that point it uses more oil than petrol, it rarely ventures over 50mph and if you encounter an incline of any sort you can kiss that sort of speed goodbye, along with about £20 of 20W50 as it vanishes out of the exhaust in the form of blue smoke.
       
      One of the PO's had clearly never heard of the term "oil change" so it developed into brown sludge that coated everything internally with the next owner(s) blissfully pouring fresh oil on top of it. This lasted until about 600 miles into my ownership when there was muffled "pop" from the engine bay and the car became a 3-cylinder. The cause was catastrophic wear to the top end causing a rocker arm to snap:
       

       
      As this was my first classic car I'd assumed it was supposed to sound like the engine was full of marbles, it wasn't.
       
      I put the engine back together with second hand bits declared it utterly fucked and promptly did another 5000 miles with it. After about 3500 of those miles the oil burning started, valve seals have gone so it's been relegated to my parent's garage as a backup car and something to take to local car shows as the 1850 is now embarrassingly ugly. I'm keeping my eye on eBay for replacement engines (deja vu, anybody?) Oh, I also recently reversed it into a parked Ford Fiesta and royally fucked up the rear bumper, rear panel and bootlid. Did I mention I'm incompetent?
       
      There have been two other cars in my life. My first car, a 2008 Toyota Yaris 1.0 an it's replacement a 2012 Corsa 1.4T. I didn't really want either of them, but it's a long story involving my parents and poor life choices. Ask if you want to hear it!
       
      So that's a brief summary of my current shite. If you want more pictures or details of anything do say as I've got photos of almost everything I'd done with the cars.
×
×
  • Create New...